[Wed Jan 25 13:45:22 2012] Detection parameters:
  Position = (270.0, 301.8) = 0 43 2.93 41 15 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1633.8 +/- 49.5
  Background counts = 29.8
  Rate = 0.09 +/- 0.003

[Wed Jan 25 13:45:24 2012] Off-axis axis estimate = 2.08'
[Wed Jan 25 22:20:42 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Wed Jan 25 22:20:42 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Wed Jan 25 22:20:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Wed Jan 25 22:20:42 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.47"
[Thu Jan 26 02:04:23 2012] fullrun_mos1_xmm0551690301_pi300-10000_cl_pass0_src8.ximg exists
[Thu Jan 26 02:04:23 2012] fullrun_mos1_xmm0551690301_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Jan 26 02:04:23 2012] Fit fullrun_mos1_xmm0551690301_pi300-10000_cl_pass0_src8 appears to have run properly
[Thu Jan 26 02:04:24 2012] fullrun_mos1_xmm0551690301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Jan 26 02:04:24 2012] fullrun_mos1_xmm0551690301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jan 26 02:04:24 2012] Fit fullrun_mos1_xmm0551690301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Jan 26 05:51:53 2012] Spatial fit model total counts = 1920.480000, observed total counts = 1911.000000
[Thu Jan 26 05:51:53 2012] Offset between fit and detection position for source 7 = 0.182657 pixels
[Thu Jan 26 05:51:53 2012] 1948.265000 total counts/ 832.235000 bgd. counts: snr = 38.685916
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.182657 pixels
  Position = (269.9, 301.7) = 0 43 2.96 41 15 25.7
  Extent = 6.4" x 4.9", rotation angle = 65
  Source counts = 1116.0 +/- 44.1
  Background counts = 832.2
  Rate = 0.05 +/- 0.002
[Thu Jan 26 05:51:54 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 05:51:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 05:51:54 2012] Assessing source extent using major
[Thu Jan 26 05:51:54 2012] Source does appear to be extended
[Thu Jan 26 05:51:54 2012] Computing asymmetry using major and minor axis, asym = 1.30
[Thu Jan 26 12:41:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 26 12:41:13 2012] Initial guess for spatial extent in simple fitting = 5.63"
[Thu Jan 26 12:41:13 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.932
[Thu Jan 26 12:41:13 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 5.63"
[Thu Jan 26 16:25:46 2012] fullrun_mos1_xmm0551690301_pi300-10000_cl_pass1_src8.ximg exists
[Thu Jan 26 16:25:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690301_pi300-10000_cl_pass1_src8.csv
[Thu Jan 26 16:25:46 2012] fullrun_mos1_xmm0551690301_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Jan 26 16:25:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690301_pi300-10000_cl_pass1_src8.csv
[Thu Jan 26 16:25:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 26 16:25:48 2012] fullrun_mos1_xmm0551690301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Jan 26 16:25:48 2012] fullrun_mos1_xmm0551690301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jan 26 16:25:48 2012] Fit fullrun_mos1_xmm0551690301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Jan 26 19:27:43 2012] Spatial fit model total counts = 1875.580000, observed total counts = 1878.000000
[Thu Jan 26 19:27:43 2012] Offset between fit and detection position for source 7 = 0.012692 pixels
[Thu Jan 26 19:27:43 2012] 1905.988000 total counts/ 806.558000 bgd. counts: snr = 38.712372
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.012692 pixels
  Position = (269.9, 301.7) = 0 43 2.96 41 15 25.7
  Extent = 5.6 (5.3-5.9)", rotation angle = 0
  Source counts = 1099.4 +/- 43.7
  Background counts = 806.6
  Rate = 0.05 +/- 0.002
[Thu Jan 26 19:27:43 2012] Vigneting correction estimate = 1.000000
[Thu Jan 26 19:27:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 26 19:27:43 2012] Assessing source extent using major axis lower bound
[Thu Jan 26 19:27:43 2012] Source does appear to be extended
[Thu Jan 26 19:27:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan 27 03:32:59 2012] Counts = 1099.430000, rescaling region sizes by 2.000000
[Fri Jan 27 03:32:59 2012] XMMSAS src. selection expression = ellipse(23430.020000, 26198.723800, 666.666019, 666.666019, 0.000000, X, Y)
[Fri Jan 27 03:32:59 2012] Writing source region out to fullrun_mos1_xmm0551690301_pi300-10000_pass1_cl_src7_src.reg
[Fri Jan 27 03:32:59 2012] Extracting stamp from image fullrun_mos1_xmm0551690301_pi300-10000_cl_sm2.00.img.gz, (232, 263) - (308, 340)
[Fri Jan 27 03:32:59 2012] XMMSAS bgd. selection expression = annulus(23430.020000, 26198.723800, 2222.220064, 4444.440128, X, Y) && !ellipse(26758.112600, 26143.886000, 532.412815, 532.412815, 0.000000, X, Y) && !ellipse(21735.405000, 25509.971600, 414.342412, 414.342412, 0.000000, X, Y) && !ellipse(25276.813100, 26938.071800, 357.549610, 357.549610, 0.000000, X, Y) && !ellipse(27671.979800, 27081.316600, 568.240016, 568.240016, 0.000000, X, Y) && !ellipse(25823.030800, 30361.442000, 403.340812, 403.340812, 0.000000, X, Y) && !ellipse(27063.196000, 27357.470000, 573.850417, 573.850417, 0.000000, X, Y) && !ellipse(24162.788600, 27001.067320, 379.828811, 339.147210, 92.771000, X, Y) && !ellipse(27553.910800, 21634.192800, 398.198411, 398.198411, 0.000000, X, Y) && !ellipse(28049.082977, 26675.766418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25823.883200, 26462.749400, 302.362409, 302.362409, 0.000000, X, Y) && !ellipse(24223.501422, 30858.420800, 475.045614, 429.733612, 299.813227, X, Y) && !ellipse(23266.986712, 29365.160400, 393.925611, 393.925611, 0.000000, X, Y) && !ellipse(26573.887634, 26913.203033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28110.609800, 25370.469600, 353.343210, 353.343210, 0.000000, X, Y) && !ellipse(24589.093933, 21353.498672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27593.283478, 26150.421082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19350.059940, 29108.107800, 453.420013, 453.420013, 0.000000, X, Y) && !ellipse(26753.453200, 29353.890000, 1277.912037, 1277.912037, 0.000000, X, Y) && !ellipse(27546.316010, 29007.471558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22168.978200, 23062.592600, 446.075213, 258.225607, 0.000000, X, Y) && !ellipse(25151.798187, 30038.225616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25850.500000, 27891.374000, 426.613612, 426.613612, 0.000000, X, Y) && !ellipse(24505.189697, 26303.271118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23148.167053, 26897.246307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26434.650000, 28017.350000, 669.145619, 669.145619, 0.000000, X, Y) && !ellipse(27447.615295, 28475.507233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28721.498352, 28542.302460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25942.636000, 28549.652000, 1169.040034, 1169.040034, 0.000000, X, Y)
[Fri Jan 27 03:32:59 2012] Writing fullrun_mos1_xmm0551690301_pi300-10000_pass1_cl_src7.gif
[Fri Jan 27 03:35:41 2012] Mean detx,y = (-2109.58, -3760.94) 
[Fri Jan 27 03:35:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan 27 03:36:00 2012] Binned source spectrum to 10 counts/bin
[Fri Jan 27 03:36:00 2012] Setting source spectrum file to fullrun_mos1_xmm0551690301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jan 27 03:36:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jan 27 09:34:14 2012] Updating aperture counts using extracted products
[Fri Jan 27 09:34:14 2012] Error reading totcts from fullrun_mos1_xmm0551690301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jan 27 09:34:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 27 09:34:15 2012] Using photon index=1.80, rate=0.0512, arf fullrun_mos1_xmm0551690301_pi300-10000_pass1_cl_src7.arf
[Fri Jan 27 09:34:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 27 09:34:15 2012] Updating source flux to 6.3e-13