[Mon Jan 23 10:16:45 2012] Detection parameters:
  Position = (249.5, 295.0) = 0 43 10.49 41 14 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5323.9 +/- 87.7
  Background counts = 70.5
  Rate = 0.4 +/- 0.007

[Mon Jan 23 10:16:47 2012] Off-axis axis estimate = 3.56'
[Mon Jan 23 10:21:07 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:21:07 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Mon Jan 23 10:21:07 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.878
[Mon Jan 23 10:21:07 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.21"
[Mon Jan 23 15:40:38 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jan 23 15:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src7.csv
[Mon Jan 23 15:40:38 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jan 23 15:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src7.csv
[Mon Jan 23 15:40:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:40:41 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jan 23 15:40:41 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jan 23 15:40:41 2012] Fit fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jan 24 00:34:20 2012] Spatial fit model total counts = 5410.000000, observed total counts = 5410.000000
[Tue Jan 24 00:34:20 2012] Offset between fit and detection position for source 8 = 0.036428 pixels
[Tue Jan 24 00:34:20 2012] 5452.320000 total counts/ 1702.850000 bgd. counts: snr = 90.861873
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.036428 pixels
  Position = (249.4, 295.0) = 0 43 10.51 41 14 51.1
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 3749.5 +/- 73.8
  Background counts = 1702.8
  Rate = 0.2 +/- 0.004
[Tue Jan 24 00:34:21 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:34:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:34:21 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:34:21 2012] Source does appear to be extended
[Tue Jan 24 00:34:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:35:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 00:35:20 2012] Initial guess for spatial extent in simple fitting = 5.39"
[Tue Jan 24 00:35:20 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.992
[Tue Jan 24 00:35:20 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 5.39"
[Tue Jan 24 06:23:25 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src8.ximg exists
[Tue Jan 24 06:23:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src8.csv
[Tue Jan 24 06:23:25 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Jan 24 06:23:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src8.csv
[Tue Jan 24 06:23:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 06:23:27 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Jan 24 06:23:27 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Jan 24 06:23:27 2012] Fit fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Jan 24 13:53:34 2012] Spatial fit model total counts = 5410.000000, observed total counts = 5410.000000
[Tue Jan 24 13:53:34 2012] Offset between fit and detection position for source 8 = 0.000106 pixels
[Tue Jan 24 13:53:34 2012] 5452.440000 total counts/ 1705.900000 bgd. counts: snr = 90.709670
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.000106 pixels
  Position = (249.4, 295.0) = 0 43 10.51 41 14 51.1
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 3746.5 +/- 73.8
  Background counts = 1705.9
  Rate = 0.2 +/- 0.004
[Tue Jan 24 13:53:34 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:53:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:53:34 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:53:34 2012] Source does appear to be extended
[Tue Jan 24 13:53:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 13:55:06 2012] Counts = 3746.540000, rescaling region sizes by 2.000000
[Tue Jan 24 13:55:06 2012] XMMSAS src. selection expression = ellipse(21652.499800, 25617.870400, 645.486019, 645.486019, 0.000000, X, Y)
[Tue Jan 24 13:55:06 2012] Writing source region out to fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src8_src.reg
[Tue Jan 24 13:55:06 2012] Extracting stamp from image fullrun_pn_xmm0551690201_pi300-10000_cl_sm2.00.img.gz, (212, 258) - (287, 332)
[Tue Jan 24 13:55:06 2012] XMMSAS bgd. selection expression = annulus(21652.499800, 25617.870400, 2151.620062, 4303.240124, X, Y) && !ellipse(25931.128000, 26628.580000, 520.292015, 520.292015, 0.000000, X, Y) && !ellipse(25309.778000, 27012.689600, 367.536011, 367.536011, 0.000000, X, Y) && !ellipse(24082.532507, 27098.540612, 422.001861, 395.250032, 349.875285, X, Y) && !ellipse(23350.859955, 26219.730621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24516.996200, 21077.635460, 454.820813, 454.820813, 0.000000, X, Y) && !ellipse(26453.197000, 29697.955000, 546.356816, 546.356816, 0.000000, X, Y) && !ellipse(26483.075012, 27009.657593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.794000, 31113.360000, 1339.888039, 1339.888039, 0.000000, X, Y) && !ellipse(24990.307780, 30083.944400, 265.378408, 265.378408, 0.000000, X, Y) && !ellipse(23231.605200, 29651.492000, 310.004809, 310.004809, 0.000000, X, Y) && !ellipse(17760.605499, 29986.418030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23149.876892, 29133.293396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26303.895050, 28939.224030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19291.729034, 29188.693237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24816.831400, 28368.642000, 1219.200035, 1219.200035, 0.000000, X, Y) && !ellipse(26009.200000, 27855.120000, 714.000821, 714.000821, 0.000000, X, Y) && !ellipse(25084.020599, 27794.162994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24802.929993, 27101.877380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23115.263275, 27010.491272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24965.252000, 25919.748000, 1133.504033, 1133.504033, 0.000000, X, Y) && !ellipse(26284.515991, 24671.272400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23809.545600, 24423.139000, 439.108813, 439.108813, 0.000000, X, Y) && !ellipse(26475.092000, 22843.908000, 1195.184034, 1195.184034, 0.000000, X, Y) && !ellipse(22032.209140, 23204.468200, 203.197606, 203.197606, 0.000000, X, Y)
[Tue Jan 24 13:55:06 2012] Writing fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src8.gif
[Tue Jan 24 14:22:29 2012] Mean detx,y = (-5041.99, 3005.39) 
[Tue Jan 24 14:22:33 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 14:23:26 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 14:23:26 2012] Setting source spectrum file to fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jan 24 14:23:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jan 25 07:12:00 2012] Updating aperture counts using extracted products
[Wed Jan 25 07:12:00 2012] Error reading totcts from fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jan 25 07:12:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 07:12:01 2012] Using photon index=1.80, rate=0.191, arf fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src8.arf
[Wed Jan 25 07:12:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 07:12:01 2012] Updating source flux to 6.5e-13