[Mon Jan 23 10:16:46 2012] Detection parameters:
  Position = (325.8, 334.1) = 0 42 41.06 41 17 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.5 +/- 20.8
  Background counts = 101.1
  Rate = 0.01 +/- 0.001

[Mon Jan 23 10:16:47 2012] Off-axis axis estimate = 3.26'
[Mon Jan 23 10:21:07 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:21:07 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Mon Jan 23 10:21:07 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.813
[Mon Jan 23 10:21:07 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 8.06"
[Mon Jan 23 15:40:39 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src66.ximg exists
[Mon Jan 23 15:40:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src66.csv
[Mon Jan 23 15:40:40 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src66_1.ximg exists
[Mon Jan 23 15:40:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src66.csv
[Mon Jan 23 15:40:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:40:43 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Mon Jan 23 15:40:43 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Mon Jan 23 15:40:43 2012] Fit fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly
[Tue Jan 24 00:34:20 2012] Warning, spatial fit 66 centroid is now closest to src. 71
[Tue Jan 24 00:34:20 2012] Source 73 is offset by -1.860510 and -3.095239 pixels which is larger than
2 X fitted extent = 1.897168 x 1.897168, not incorporating fit results
[Tue Jan 24 00:34:21 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:34:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:34:21 2012] Assessing source extent using major
[Tue Jan 24 00:34:21 2012] Source does appear to be extended
[Tue Jan 24 00:34:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:34:21 2012] Source is confused with source 71
[Tue Jan 24 00:35:20 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 00:35:20 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Tue Jan 24 00:35:20 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.813
[Tue Jan 24 00:35:20 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 8.06"
[Tue Jan 24 06:23:26 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src58.ximg exists
[Tue Jan 24 06:23:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src58.csv
[Tue Jan 24 06:23:26 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src58_1.ximg exists
[Tue Jan 24 06:23:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src58.csv
[Tue Jan 24 06:23:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 06:23:27 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Tue Jan 24 06:23:27 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Tue Jan 24 06:23:28 2012] Fit fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Tue Jan 24 13:53:34 2012] Spatial fit model total counts = 2572.540000, observed total counts = 2566.000000
[Tue Jan 24 13:53:34 2012] Offset between fit and detection position for source 73 = 1.136905 pixels
[Tue Jan 24 13:53:34 2012] Warning, changing simple spatial fit ID from 58 to 57
[Tue Jan 24 13:53:34 2012] 2221.397000 total counts/ 2071.740000 bgd. counts: snr = 3.287982
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 1.136905 pixels
  Position = (324.7, 334.6) = 0 42 41.45 41 17 43.4
  Extent = 7.9 (6.3-10.6)", rotation angle = 0
  Source counts = 149.7 +/- 47.1
  Background counts = 2071.7
  Rate = 0.008 +/- 0.002
[Tue Jan 24 13:53:34 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:53:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:53:34 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:53:34 2012] Source does appear to be extended
[Tue Jan 24 13:53:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 13:55:12 2012] XMMSAS src. selection expression = ellipse(28204.429600, 29061.156000, 474.731414, 474.731414, 0.000000, X, Y)
[Tue Jan 24 13:55:12 2012] Writing source region out to fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src73_src.reg
[Tue Jan 24 13:55:12 2012] Extracting stamp from image fullrun_pn_xmm0551690201_pi300-10000_cl_sm2.00.img.gz, (297, 307) - (352, 362)
[Tue Jan 24 13:55:12 2012] XMMSAS bgd. selection expression = annulus(28204.429600, 29061.156000, 791.219023, 1582.438046, X, Y) && !ellipse(28877.414000, 27062.165400, 1391.870440, 1391.870440, 0.000000, X, Y) && !ellipse(27588.720200, 27213.693600, 582.566417, 582.566417, 0.000000, X, Y) && !ellipse(27226.264000, 27395.744000, 1155.912033, 1155.912033, 0.000000, X, Y) && !ellipse(27970.574000, 26892.594000, 1132.896033, 1132.896033, 0.000000, X, Y) && !ellipse(30535.703766, 31360.916077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26453.197000, 29697.955000, 546.356816, 546.356816, 0.000000, X, Y) && !ellipse(26483.075012, 27009.657593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.794000, 31113.360000, 1339.888039, 1339.888039, 0.000000, X, Y) && !ellipse(28520.392200, 30281.295800, 483.446414, 483.446414, 0.000000, X, Y) && !ellipse(28957.984467, 29511.082825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28390.123600, 29741.056000, 1026.632030, 1026.632030, 0.000000, X, Y) && !ellipse(26303.895050, 28939.224030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28982.339050, 28646.225616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27445.215276, 28946.751600, 437.979213, 437.979213, 0.000000, X, Y) && !ellipse(29554.986389, 28398.224640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27944.896973, 28393.628784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28705.000000, 28124.214996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29350.049988, 27989.620941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26009.200000, 27855.120000, 714.000821, 714.000821, 0.000000, X, Y)
[Tue Jan 24 13:55:12 2012] Writing fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src73.gif
[Tue Jan 24 15:42:48 2012] Mean detx,y = (157.30, -2163.61) 
[Tue Jan 24 15:42:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 15:43:06 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 15:43:06 2012] Setting source spectrum file to fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Tue Jan 24 15:43:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Wed Jan 25 07:12:01 2012] Updating aperture counts using extracted products
[Wed Jan 25 07:12:01 2012] Error reading totcts from fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Jan 25 07:12:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 07:12:03 2012] Using photon index=1.80, rate=0.00762, arf fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src73.arf
[Wed Jan 25 07:12:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 07:12:03 2012] Updating source flux to 2.3e-14
[Wed Jan 25 07:21:10 2012] Flag b found in src. 73 procflags, skipping spectral fitting
[Wed Jan 25 07:21:10 2012] Flag c found in src. 73 procflags, skipping spectral fitting