[Mon Jan 23 10:16:45 2012] Detection parameters:
  Position = (316.2, 250.7) = 0 42 44.75 41 11 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2631.1 +/- 63.6
  Background counts = 96.7
  Rate = 0.2 +/- 0.004

[Mon Jan 23 10:16:47 2012] Off-axis axis estimate = 3.69'
[Mon Jan 23 10:21:07 2012] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 10:21:07 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Mon Jan 23 10:21:07 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.083
[Mon Jan 23 10:21:07 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.27"
[Mon Jan 23 15:40:38 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jan 23 15:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src13.csv
[Mon Jan 23 15:40:38 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jan 23 15:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src13.csv
[Mon Jan 23 15:40:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 15:40:41 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jan 23 15:40:41 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jan 23 15:40:41 2012] Fit fullrun_pn_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Jan 24 00:34:20 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 11.544959 pixels away
[Tue Jan 24 00:34:21 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:34:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:34:21 2012] Assessing source extent using major
[Tue Jan 24 00:34:21 2012] Source does appear to be extended
[Tue Jan 24 00:34:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:35:20 2012] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 00:35:20 2012] Initial guess for spatial extent in simple fitting = 8.27"
[Tue Jan 24 00:35:20 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.083
[Tue Jan 24 00:35:20 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 8.27"
[Tue Jan 24 06:23:25 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src14.ximg exists
[Tue Jan 24 06:23:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src14.csv
[Tue Jan 24 06:23:25 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue Jan 24 06:23:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src14.csv
[Tue Jan 24 06:23:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 06:23:27 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue Jan 24 06:23:27 2012] fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Jan 24 06:23:27 2012] Fit fullrun_pn_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Tue Jan 24 13:53:34 2012] Spatial fit model total counts = 3594.000000, observed total counts = 3594.000000
[Tue Jan 24 13:53:34 2012] Offset between fit and detection position for source 16 = 0.166992 pixels
[Tue Jan 24 13:53:34 2012] 3642.350000 total counts/ 1839.870000 bgd. counts: snr = 42.022016
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.166992 pixels
  Position = (316.2, 250.6) = 0 42 44.75 41 11 37.9
  Extent = 5.5 (5.2-5.8)", rotation angle = 0
  Source counts = 1802.5 +/- 60.4
  Background counts = 1839.9
  Rate = 0.09 +/- 0.003
[Tue Jan 24 13:53:34 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:53:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:53:34 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:53:34 2012] Source does appear to be extended
[Tue Jan 24 13:53:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 13:55:07 2012] Counts = 1802.480000, rescaling region sizes by 2.000000
[Tue Jan 24 13:55:07 2012] XMMSAS src. selection expression = ellipse(27464.106800, 21751.056600, 659.886019, 659.886019, 0.000000, X, Y)
[Tue Jan 24 13:55:07 2012] Writing source region out to fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src16_src.reg
[Tue Jan 24 13:55:07 2012] Extracting stamp from image fullrun_pn_xmm0551690201_pi300-10000_cl_sm2.00.img.gz, (278, 213) - (354, 288)
[Tue Jan 24 13:55:07 2012] XMMSAS bgd. selection expression = annulus(27464.106800, 21751.056600, 2199.620063, 4399.240127, X, Y) && !ellipse(28877.414000, 27062.165400, 1391.870440, 1391.870440, 0.000000, X, Y) && !ellipse(25931.128000, 26628.580000, 520.292015, 520.292015, 0.000000, X, Y) && !ellipse(26651.851300, 26234.810200, 491.327214, 491.327214, 0.000000, X, Y) && !ellipse(27970.574000, 26892.594000, 1132.896033, 1132.896033, 0.000000, X, Y) && !ellipse(23350.859955, 26219.730621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24516.996200, 21077.635460, 454.820813, 454.820813, 0.000000, X, Y) && !ellipse(30342.278800, 23666.169800, 483.345614, 363.198410, 116.636300, X, Y) && !ellipse(27212.647200, 20520.262200, 431.683212, 431.683212, 0.000000, X, Y) && !ellipse(26483.075012, 27009.657593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28032.789540, 25498.699000, 317.540009, 317.540009, 0.000000, X, Y) && !ellipse(28659.647800, 25161.005400, 366.738411, 366.738411, 0.000000, X, Y) && !ellipse(28400.877014, 23948.639801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31225.979523, 19791.048447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23115.263275, 27010.491272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32118.520721, 26343.813416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31448.312680, 26282.835000, 1399.200040, 1399.200040, 0.000000, X, Y) && !ellipse(27437.329712, 26319.113678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24965.252000, 25919.748000, 1133.504033, 1133.504033, 0.000000, X, Y) && !ellipse(32487.224640, 26140.589508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31603.048000, 26012.270000, 1403.632040, 1403.632040, 0.000000, X, Y) && !ellipse(29248.511400, 25124.390000, 1277.784037, 1277.784037, 0.000000, X, Y) && !ellipse(32362.616150, 24747.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29339.066132, 24414.509827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26284.515991, 24671.272400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23809.545600, 24423.139000, 439.108813, 439.108813, 0.000000, X, Y) && !ellipse(27414.111400, 24711.809800, 337.828010, 337.828010, 0.000000, X, Y) && !ellipse(30905.194000, 25293.720000, 1934.704056, 1934.704056, 0.000000, X, Y) && !ellipse(32528.250153, 24061.964417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26475.092000, 22843.908000, 1195.184034, 1195.184034, 0.000000, X, Y) && !ellipse(31021.783875, 22671.204315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31287.156708, 22570.674286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28381.724820, 20465.616400, 342.035210, 342.035210, 0.000000, X, Y) && !ellipse(23325.095800, 20093.122000, 391.533611, 391.533611, 0.000000, X, Y)
[Tue Jan 24 13:55:07 2012] Writing fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src16.gif
[Tue Jan 24 14:37:52 2012] Mean detx,y = (1622.88, 4964.18) 
[Tue Jan 24 14:37:58 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 24 14:38:59 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 24 14:39:00 2012] Setting source spectrum file to fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jan 24 14:39:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Jan 25 07:12:00 2012] Updating aperture counts using extracted products
[Wed Jan 25 07:12:00 2012] Error reading totcts from fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Jan 25 07:12:01 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 07:12:01 2012] Using photon index=1.80, rate=0.0918, arf fullrun_pn_xmm0551690201_pi300-10000_pass1_cl_src16.arf
[Wed Jan 25 07:12:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 07:12:02 2012] Updating source flux to 2.8e-13