[Mon Jan 23 10:18:24 2012] Detection parameters:
  Position = (351.9, 315.8) = 0 42 30.98 41 16 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1871.8 +/- 53.1
  Background counts = 27.6
  Rate = 0.1 +/- 0.003

[Mon Jan 23 10:18:26 2012] Off-axis axis estimate = 4.07'
[Mon Jan 23 20:01:30 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:01:30 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Mon Jan 23 20:01:30 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.044
[Mon Jan 23 20:01:30 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.47"
[Tue Jan 24 00:33:55 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src8.ximg exists
[Tue Jan 24 00:33:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src8.csv
[Tue Jan 24 00:33:55 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Jan 24 00:33:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src8.csv
[Tue Jan 24 00:33:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:33:56 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Jan 24 00:33:56 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Jan 24 00:33:56 2012] Fit fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Tue Jan 24 00:34:56 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.225963 pixels away
[Tue Jan 24 00:34:57 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:34:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:34:57 2012] Assessing source extent using major
[Tue Jan 24 00:34:57 2012] Source does appear to be extended
[Tue Jan 24 00:34:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:34:57 2012] Source is confused with source 71
[Tue Jan 24 09:24:08 2012] Using EEF radius (= 8.47 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:24:08 2012] Initial guess for spatial extent in simple fitting = 8.47"
[Tue Jan 24 09:24:08 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.044
[Tue Jan 24 09:24:08 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 8.47"
[Tue Jan 24 13:52:54 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src8.ximg exists
[Tue Jan 24 13:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src8.csv
[Tue Jan 24 13:52:54 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src8_1.ximg exists
[Tue Jan 24 13:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src8.csv
[Tue Jan 24 13:52:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 13:52:56 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Tue Jan 24 13:52:56 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Tue Jan 24 13:52:56 2012] Fit fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Tue Jan 24 13:54:20 2012] Spatial fit model total counts = 2423.210000, observed total counts = 2423.000000
[Tue Jan 24 13:54:20 2012] Offset between fit and detection position for source 8 = 0.153213 pixels
[Tue Jan 24 13:54:20 2012] 2245.270000 total counts/ 1051.710000 bgd. counts: snr = 36.804104
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.153213 pixels
  Position = (351.8, 315.7) = 0 42 31.01 41 16 20.9
  Extent = 4.9 (4.7-5.2)", rotation angle = 0
  Source counts = 1193.6 +/- 47.4
  Background counts = 1051.7
  Rate = 0.06 +/- 0.002
[Tue Jan 24 13:54:21 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:54:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:54:21 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:54:21 2012] Source does appear to be extended
[Tue Jan 24 13:54:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:49:47 2012] Counts = 1193.560000, rescaling region sizes by 2.000000
[Wed Jan 25 03:49:47 2012] XMMSAS src. selection expression = ellipse(30560.886560, 27414.011200, 590.260817, 590.260817, 0.000000, X, Y)
[Wed Jan 25 03:49:47 2012] Writing source region out to fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src8_src.reg
[Wed Jan 25 03:49:47 2012] Extracting stamp from image fullrun_mos2_xmm0551690201_pi300-10000_cl_sm2.00.img.gz, (318, 282) - (386, 350)
[Wed Jan 25 03:49:47 2012] XMMSAS bgd. selection expression = annulus(30560.886560, 27414.011200, 1967.536057, 3935.072113, X, Y) && !ellipse(28869.101600, 27055.226600, 429.202412, 429.202412, 0.000000, X, Y) && !ellipse(26647.143200, 26221.488420, 453.329613, 453.329613, 0.000000, X, Y) && !ellipse(27259.550000, 27382.050400, 1267.728036, 1267.728036, 0.000000, X, Y) && !ellipse(32393.863060, 26484.815200, 365.192811, 365.192811, 0.000000, X, Y) && !ellipse(26968.058000, 27476.066000, 632.841618, 632.841618, 0.000000, X, Y) && !ellipse(34606.727400, 30112.867000, 385.424811, 385.424811, 0.000000, X, Y) && !ellipse(33372.648380, 24622.799800, 371.786411, 371.786411, 0.000000, X, Y) && !ellipse(32735.676200, 27005.286800, 251.268807, 251.268807, 0.000000, X, Y) && !ellipse(30330.632860, 23667.130200, 442.414413, 442.414413, 0.000000, X, Y) && !ellipse(26498.097168, 27008.813293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30541.767853, 31352.937714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28396.431340, 23938.163800, 377.287211, 377.287211, 0.000000, X, Y) && !ellipse(31712.041046, 30861.558167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28030.881800, 25489.593800, 362.173610, 362.173610, 0.000000, X, Y) && !ellipse(32354.717200, 24739.150200, 301.642409, 301.642409, 0.000000, X, Y) && !ellipse(29929.037600, 27382.476800, 322.447209, 322.447209, 0.000000, X, Y) && !ellipse(28547.213747, 30214.976835, 382.111864, 355.118416, 244.676737, X, Y) && !ellipse(28673.150000, 25146.045400, 451.520013, 293.284808, 60.865000, X, Y) && !ellipse(26406.860800, 29715.896000, 730.640021, 295.208008, 38.791000, X, Y) && !ellipse(34053.904327, 28586.577728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27465.251400, 28918.196400, 822.728024, 381.838411, 89.031840, X, Y) && !ellipse(28033.282898, 28132.140259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25824.641022, 27941.941925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34142.526550, 22920.309784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.332642, 29600.456421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29660.218475, 31745.143951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31930.358795, 24200.673767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26996.809906, 28384.288391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27225.163666, 24703.026550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28880.199200, 27767.998000, 1285.560037, 1285.560037, 0.000000, X, Y) && !ellipse(35089.972000, 27758.996000, 1057.096030, 1057.096030, 0.000000, X, Y) && !ellipse(26137.822968, 28941.796753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29189.343719, 25186.666687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26816.966187, 25376.403046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26546.633759, 29005.005035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30505.003662, 25644.436218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30043.522400, 26407.961578, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 03:49:47 2012] Writing fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src8.gif
[Wed Jan 25 03:57:39 2012] Mean detx,y = (-2748.88, 1183.99) 
[Wed Jan 25 03:57:40 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:58:01 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:58:01 2012] Setting source spectrum file to fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jan 25 03:58:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Jan 25 07:12:06 2012] Updating aperture counts using extracted products
[Wed Jan 25 07:12:06 2012] Error reading totcts from fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Jan 25 07:12:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 07:12:07 2012] Using photon index=1.80, rate=0.0554, arf fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src8.arf
[Wed Jan 25 07:12:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 07:12:07 2012] Updating source flux to 6.6e-13
[Wed Jan 25 07:16:25 2012] Flag c found in src. 8 procflags, skipping spectral fitting