[Mon Jan 23 10:18:24 2012] Detection parameters:
  Position = (290.2, 311.3) = 0 42 54.77 41 16 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2397.8 +/- 59.2
  Background counts = 39.6
  Rate = 0.1 +/- 0.003

[Mon Jan 23 10:18:26 2012] Off-axis axis estimate = 1.10'
[Mon Jan 23 20:01:30 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:01:30 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Mon Jan 23 20:01:30 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.903
[Mon Jan 23 20:01:30 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 6.98"
[Tue Jan 24 00:33:55 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jan 24 00:33:55 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jan 24 00:33:55 2012] Fit fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src5 appears to have run properly
[Tue Jan 24 00:33:56 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jan 24 00:33:56 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jan 24 00:33:56 2012] Fit fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Jan 24 00:34:56 2012] Spatial fit model total counts = 3694.970000, observed total counts = 3695.000000
[Tue Jan 24 00:34:56 2012] Offset between fit and detection position for source 7 = 0.314855 pixels
[Tue Jan 24 00:34:56 2012] 2936.920000 total counts/ 1522.280000 bgd. counts: snr = 36.257567
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.314855 pixels
  Position = (290.1, 311.5) = 0 42 54.84 41 16 3.0
  Extent = 4.9" x 4.6", rotation angle = 350
  Source counts = 1414.6 +/- 54.2
  Background counts = 1522.3
  Rate = 0.07 +/- 0.003
[Tue Jan 24 00:34:56 2012] Spatial fit model total counts = 4159.330000, observed total counts = 4150.000000
[Tue Jan 24 00:34:56 2012] Offset between fit and detection position for source 7 = 0.096558 pixels
[Tue Jan 24 00:34:56 2012] Warning, changing simple spatial fit ID from 5 to 10
[Tue Jan 24 00:34:56 2012] 4269.290000 total counts/ 3056.800000 bgd. counts: snr = 21.930304
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.096558 pixels
  Position = (290.1, 311.4) = 0 42 54.82 41 16 2.6
  Extent = 4.2 (4.0-4.4)", rotation angle = 0
  Source counts = 1212.5 +/- 65.3
  Background counts = 3056.8
  Rate = 0.06 +/- 0.003
[Tue Jan 24 00:34:57 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:34:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:34:57 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 00:34:57 2012] Source does appear to be extended
[Tue Jan 24 00:34:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:24:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:24:08 2012] Initial guess for spatial extent in simple fitting = 4.16"
[Tue Jan 24 09:24:08 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.060
[Tue Jan 24 09:24:08 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.16"
[Tue Jan 24 13:52:54 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jan 24 13:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src5.csv
[Tue Jan 24 13:52:54 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jan 24 13:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src5.csv
[Tue Jan 24 13:52:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 13:52:56 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jan 24 13:52:56 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jan 24 13:52:56 2012] Fit fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Jan 24 13:54:20 2012] Spatial fit model total counts = 3699.190000, observed total counts = 3695.000000
[Tue Jan 24 13:54:20 2012] Offset between fit and detection position for source 7 = 0.045747 pixels
[Tue Jan 24 13:54:20 2012] 3469.640000 total counts/ 2095.430000 bgd. counts: snr = 30.020404
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.045747 pixels
  Position = (290.1, 311.5) = 0 42 54.83 41 16 2.8
  Extent = 4.7 (4.5-4.9)", rotation angle = 0
  Source counts = 1374.2 +/- 58.9
  Background counts = 2095.4
  Rate = 0.06 +/- 0.003
[Tue Jan 24 13:54:21 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:54:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:54:21 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 13:54:21 2012] Source does appear to be extended
[Tue Jan 24 13:54:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:49:47 2012] Counts = 1374.210000, rescaling region sizes by 2.000000
[Wed Jan 25 03:49:47 2012] XMMSAS src. selection expression = ellipse(25189.999000, 27049.837200, 563.172016, 563.172016, 0.000000, X, Y)
[Wed Jan 25 03:49:47 2012] Writing source region out to fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src7_src.reg
[Wed Jan 25 03:49:47 2012] Extracting stamp from image fullrun_mos2_xmm0551690201_pi300-10000_cl_sm2.00.img.gz, (258, 279) - (322, 344)
[Wed Jan 25 03:49:47 2012] XMMSAS bgd. selection expression = annulus(25189.999000, 27049.837200, 1877.240054, 3754.480108, X, Y) && !ellipse(28869.101600, 27055.226600, 429.202412, 429.202412, 0.000000, X, Y) && !ellipse(26647.143200, 26221.488420, 453.329613, 453.329613, 0.000000, X, Y) && !ellipse(27259.550000, 27382.050400, 1267.728036, 1267.728036, 0.000000, X, Y) && !ellipse(21643.431000, 25617.355000, 429.409414, 429.409414, 0.000000, X, Y) && !ellipse(26968.058000, 27476.066000, 632.841618, 632.841618, 0.000000, X, Y) && !ellipse(25731.800400, 30475.117600, 386.662411, 386.662411, 0.000000, X, Y) && !ellipse(25742.212982, 26579.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24101.920000, 26964.738000, 300.472009, 300.472009, 0.000000, X, Y) && !ellipse(23345.516200, 26292.475000, 416.168812, 416.168812, 0.000000, X, Y) && !ellipse(24125.442900, 30972.539800, 370.557611, 370.557611, 0.000000, X, Y) && !ellipse(23165.314320, 29483.317000, 368.861611, 368.861611, 0.000000, X, Y) && !ellipse(26498.097168, 27008.813293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28396.431340, 23938.163800, 377.287211, 377.287211, 0.000000, X, Y) && !ellipse(28030.881800, 25489.593800, 362.173610, 362.173610, 0.000000, X, Y) && !ellipse(28547.213747, 30214.976835, 382.111864, 355.118416, 244.676737, X, Y) && !ellipse(28673.150000, 25146.045400, 451.520013, 293.284808, 60.865000, X, Y) && !ellipse(25095.086761, 30128.934692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26406.860800, 29715.896000, 730.640021, 295.208008, 38.791000, X, Y) && !ellipse(27465.251400, 28918.196400, 822.728024, 381.838411, 89.031840, X, Y) && !ellipse(28033.282898, 28132.140259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25824.641022, 27941.941925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22095.361649, 23174.980194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24448.480927, 26344.896667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.332642, 29600.456421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26996.809906, 28384.288391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27225.163666, 24703.026550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28880.199200, 27767.998000, 1285.560037, 1285.560037, 0.000000, X, Y) && !ellipse(22714.450000, 27568.874000, 1229.592035, 1229.592035, 0.000000, X, Y) && !ellipse(26137.822968, 28941.796753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29189.343719, 25186.666687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26816.966187, 25376.403046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26546.633759, 29005.005035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25322.410370, 25697.441223, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 03:49:47 2012] Writing fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src7.gif
[Wed Jan 25 03:56:28 2012] Mean detx,y = (2199.27, -777.84) 
[Wed Jan 25 03:56:29 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 03:56:39 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 03:56:40 2012] Setting source spectrum file to fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jan 25 03:56:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jan 25 07:12:06 2012] Updating aperture counts using extracted products
[Wed Jan 25 07:12:06 2012] Error reading totcts from fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jan 25 07:12:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 07:12:07 2012] Using photon index=1.80, rate=0.0638, arf fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src7.arf
[Wed Jan 25 07:12:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 07:12:07 2012] Updating source flux to 6.6e-13