[Mon Jan 23 10:18:25 2012] Detection parameters:
  Position = (289.0, 346.9) = 0 42 55.25 41 18 36.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 311.0 +/- 23.7
  Background counts = 29.5
  Rate = 0.02 +/- 0.001

[Mon Jan 23 10:18:26 2012] Off-axis axis estimate = 3.58'
[Mon Jan 23 20:01:30 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 20:01:30 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Mon Jan 23 20:01:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.876
[Mon Jan 23 20:01:30 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 8.22"
[Tue Jan 24 00:33:55 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src43.ximg exists
[Tue Jan 24 00:33:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src43.csv
[Tue Jan 24 00:33:55 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src43_1.ximg exists
[Tue Jan 24 00:33:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src43.csv
[Tue Jan 24 00:33:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 00:33:57 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Tue Jan 24 00:33:57 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Tue Jan 24 00:33:57 2012] Fit fullrun_mos2_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Tue Jan 24 00:34:56 2012] Source 54 is offset by 3.037112 and -2.163302 pixels which is larger than
2 X fitted extent = 0.996207 x 0.996207, not incorporating fit results
[Tue Jan 24 00:34:57 2012] Source 54 is offset by -6.768750 and -3.999463 pixels which is larger than
2 X fitted extent = 1.804915 x 1.804915, not incorporating fit results
[Tue Jan 24 00:34:57 2012] Source 54 is offset by -7.607623 and -3.202613 pixels which is larger than
2 X fitted extent = 2.542966 x 1.232184, not incorporating fit results
[Tue Jan 24 00:34:57 2012] Source 54 is offset by -8.650681 and -2.475509 pixels which is larger than
2 X fitted extent = 2.235007 x 2.235007, not incorporating fit results
[Tue Jan 24 00:34:57 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:34:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:34:57 2012] Assessing source extent using major
[Tue Jan 24 00:34:57 2012] Source does appear to be extended
[Tue Jan 24 00:34:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 09:24:08 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 09:24:08 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Tue Jan 24 09:24:08 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.876
[Tue Jan 24 09:24:08 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 8.22"
[Tue Jan 24 13:52:55 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src40.ximg exists
[Tue Jan 24 13:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src40.csv
[Tue Jan 24 13:52:55 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src40_1.ximg exists
[Tue Jan 24 13:52:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src40.csv
[Tue Jan 24 13:52:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 13:52:57 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Tue Jan 24 13:52:57 2012] fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Tue Jan 24 13:52:57 2012] Fit fullrun_mos2_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Tue Jan 24 13:54:20 2012] Source 54 is offset by -6.771095 and -4.002245 pixels which is larger than
2 X fitted extent = 1.776041 x 1.776041, not incorporating fit results
[Tue Jan 24 13:54:20 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 54 at 10.282493 pixels away
[Tue Jan 24 13:54:21 2012] Source 54 is offset by -8.650681 and -2.475509 pixels which is larger than
2 X fitted extent = 2.181605 x 2.181605, not incorporating fit results
[Tue Jan 24 13:54:21 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:54:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:54:21 2012] Assessing source extent using major
[Tue Jan 24 13:54:21 2012] Source does appear to be extended
[Tue Jan 24 13:54:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 03:49:48 2012] XMMSAS src. selection expression = ellipse(25095.086761, 30128.934692, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 03:49:48 2012] Writing source region out to fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src54_src.reg
[Wed Jan 25 03:49:48 2012] Extracting stamp from image fullrun_mos2_xmm0551690201_pi300-10000_cl_sm2.00.img.gz, (252, 309) - (327, 384)
[Wed Jan 25 03:49:48 2012] XMMSAS bgd. selection expression = annulus(25095.086761, 30128.934692, 1087.500000, 2175.000000, X, Y) && !ellipse(27259.550000, 27382.050400, 1267.728036, 1267.728036, 0.000000, X, Y) && !ellipse(26968.058000, 27476.066000, 632.841618, 632.841618, 0.000000, X, Y) && !ellipse(25731.800400, 30475.117600, 386.662411, 386.662411, 0.000000, X, Y) && !ellipse(24125.442900, 30972.539800, 370.557611, 370.557611, 0.000000, X, Y) && !ellipse(23165.314320, 29483.317000, 368.861611, 368.861611, 0.000000, X, Y) && !ellipse(26406.860800, 29715.896000, 730.640021, 295.208008, 38.791000, X, Y) && !ellipse(27465.251400, 28918.196400, 822.728024, 381.838411, 89.031840, X, Y) && !ellipse(28033.282898, 28132.140259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25824.641022, 27941.941925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.332642, 29600.456421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26996.809906, 28384.288391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22714.450000, 27568.874000, 1229.592035, 1229.592035, 0.000000, X, Y) && !ellipse(26137.822968, 28941.796753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26546.633759, 29005.005035, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 03:49:48 2012] Writing fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src54.gif
[Wed Jan 25 04:10:22 2012] Mean detx,y = (3144.07, 2274.50) 
[Wed Jan 25 04:10:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 04:10:31 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 04:10:31 2012] Setting source spectrum file to fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed Jan 25 04:10:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Wed Jan 25 06:24:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 06:24:00 2012] rmf not generated due to insufficient counts
[Wed Jan 25 07:12:07 2012] Updating aperture counts using extracted products
[Wed Jan 25 07:12:07 2012] Error reading totcts from fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed Jan 25 07:12:08 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 07:12:08 2012] Using photon index=1.80, rate=0.017, arf fullrun_mos2_xmm0551690201_pi300-10000_pass1_cl_src54.arf
[Wed Jan 25 07:12:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 07:12:08 2012] Updating source flux to 2.2e-13
[Wed Jan 25 07:16:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting