[Mon Jan 23 10:17:35 2012] Detection parameters:
  Position = (314.8, 288.9) = 0 42 45.30 41 14 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.5 +/- 15.1
  Background counts = 43.6
  Rate = 0.003 +/- 0.0007

[Mon Jan 23 10:17:35 2012] Off-axis axis estimate = 1.37'
[Mon Jan 23 15:40:45 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:40:45 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Mon Jan 23 15:40:45 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.877
[Mon Jan 23 15:40:45 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 7.11"
[Mon Jan 23 20:01:26 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_src81.ximg exists
[Mon Jan 23 20:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_src81.csv
[Mon Jan 23 20:01:26 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_src81_1.ximg exists
[Mon Jan 23 20:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_src81.csv
[Mon Jan 23 20:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:01:29 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Mon Jan 23 20:01:29 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Mon Jan 23 20:01:29 2012] Fit fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Tue Jan 24 00:34:38 2012] Warning, spatial fit 81 centroid is now closest to src. 1
[Tue Jan 24 00:34:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:34:38 2012] Assessing source extent using major
[Tue Jan 24 00:34:38 2012] Source does appear to be extended
[Tue Jan 24 00:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 00:34:38 2012] Source is confused with source 74
[Tue Jan 24 06:23:28 2012] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 06:23:28 2012] Initial guess for spatial extent in simple fitting = 7.11"
[Tue Jan 24 06:23:28 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.877
[Tue Jan 24 06:23:28 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 7.11"
[Tue Jan 24 09:24:06 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_src79.ximg exists
[Tue Jan 24 09:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_src79.csv
[Tue Jan 24 09:24:06 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_src79_1.ximg exists
[Tue Jan 24 09:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_src79.csv
[Tue Jan 24 09:24:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:24:08 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Tue Jan 24 09:24:08 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Tue Jan 24 09:24:08 2012] Fit fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Tue Jan 24 13:53:55 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 69 at 16.081216 pixels away
[Tue Jan 24 13:53:56 2012] Source 69 is offset by -0.396180 and 4.442915 pixels which is larger than
2 X fitted extent = 1.848874 x 1.848874, not incorporating fit results
[Tue Jan 24 13:53:56 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:53:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:53:56 2012] Assessing source extent using major
[Tue Jan 24 13:53:56 2012] Source does appear to be extended
[Tue Jan 24 13:53:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 25 00:50:30 2012] XMMSAS src. selection expression = ellipse(27339.051147, 25087.591614, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 00:50:30 2012] Writing source region out to fullrun_mos1_xmm0551690201_pi300-10000_pass1_cl_src69_src.reg
[Wed Jan 25 00:50:30 2012] Extracting stamp from image fullrun_mos1_xmm0551690201_pi300-10000_cl_sm2.00.img.gz, (277, 251) - (352, 326)
[Wed Jan 25 00:50:30 2012] XMMSAS bgd. selection expression = annulus(27339.051147, 25087.591614, 1087.500000, 2175.000000, X, Y) && !ellipse(28873.033200, 27050.580600, 423.919212, 423.919212, 0.000000, X, Y) && !ellipse(26700.322000, 25750.678000, 1072.472031, 1072.472031, 0.000000, X, Y) && !ellipse(27586.954200, 27197.332600, 542.666416, 542.666416, 0.000000, X, Y) && !ellipse(25182.766096, 27046.777000, 341.663210, 341.663210, 0.000000, X, Y) && !ellipse(26956.581000, 27475.323000, 592.954417, 336.698410, 80.060000, X, Y) && !ellipse(25731.957400, 26578.183600, 315.483209, 315.483209, 0.000000, X, Y) && !ellipse(27937.247400, 26758.983800, 429.792812, 429.792812, 0.000000, X, Y) && !ellipse(30333.204681, 23641.747620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26483.600708, 27004.610382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28410.748200, 23924.053600, 365.407211, 365.407211, 0.000000, X, Y) && !ellipse(28658.502000, 25149.146000, 242.532807, 242.532807, 0.000000, X, Y) && !ellipse(28038.860320, 25485.739000, 248.783207, 248.783207, 0.000000, X, Y) && !ellipse(29933.612152, 27357.389435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27699.505890, 26150.495422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24428.854950, 26385.802704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27383.713600, 24707.438800, 376.234411, 204.232806, 301.580000, X, Y) && !ellipse(28814.989899, 26066.715973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29199.764000, 25527.434000, 1222.136035, 1222.136035, 0.000000, X, Y) && !ellipse(26860.553802, 22080.607651, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 00:50:30 2012] Writing fullrun_mos1_xmm0551690201_pi300-10000_pass1_cl_src69.gif
[Wed Jan 25 01:09:18 2012] Mean detx,y = (-1740.17, 247.83) 
[Wed Jan 25 01:09:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 01:09:27 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 01:09:27 2012] Setting source spectrum file to fullrun_mos1_xmm0551690201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Wed Jan 25 01:09:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690201_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Wed Jan 25 03:49:35 2012] Not generating rmf since there are only 62 counts
[Wed Jan 25 03:49:35 2012] rmf not generated due to insufficient counts
[Wed Jan 25 07:12:05 2012] Updating aperture counts using extracted products
[Wed Jan 25 07:12:05 2012] Error reading totcts from fullrun_mos1_xmm0551690201_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Wed Jan 25 07:12:06 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 07:12:06 2012] Using photon index=1.80, rate=0.00305, arf fullrun_mos1_xmm0551690201_pi300-10000_pass1_cl_src69.arf
[Wed Jan 25 07:12:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 07:12:06 2012] Updating source flux to 3.1e-14
[Wed Jan 25 07:12:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting