[Mon Jan 23 10:17:35 2012] Detection parameters:
  Position = (331.8, 300.2) = 0 42 38.75 41 15 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.2 +/- 19.9
  Background counts = 42.7
  Rate = 0.006 +/- 0.0009

[Mon Jan 23 10:17:35 2012] Off-axis axis estimate = 2.42'
[Mon Jan 23 15:40:45 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Mon Jan 23 15:40:45 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Mon Jan 23 15:40:45 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.786
[Mon Jan 23 15:40:45 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 7.64"
[Mon Jan 23 20:01:26 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_src65.ximg exists
[Mon Jan 23 20:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_src65.csv
[Mon Jan 23 20:01:26 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_src65_1.ximg exists
[Mon Jan 23 20:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_src65.csv
[Mon Jan 23 20:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 23 20:01:29 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Mon Jan 23 20:01:29 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Mon Jan 23 20:01:29 2012] Fit fullrun_mos1_xmm0551690201_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Tue Jan 24 00:34:38 2012] Source 65 is offset by 0.699751 and -7.848851 pixels which is larger than
2 X fitted extent = 7.023770 x 7.023770, not incorporating fit results
[Tue Jan 24 00:34:38 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 00:34:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 00:34:38 2012] Assessing source extent using major
[Tue Jan 24 00:34:38 2012] Source does appear to be extended
[Tue Jan 24 00:34:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 06:23:28 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 06:23:28 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Tue Jan 24 06:23:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.786
[Tue Jan 24 06:23:28 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 7.64"
[Tue Jan 24 09:24:06 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_src65.ximg exists
[Tue Jan 24 09:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_src65.csv
[Tue Jan 24 09:24:06 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_src65_1.ximg exists
[Tue Jan 24 09:24:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_src65.csv
[Tue Jan 24 09:24:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 09:24:07 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Tue Jan 24 09:24:07 2012] fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Tue Jan 24 09:24:07 2012] Fit fullrun_mos1_xmm0551690201_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Tue Jan 24 13:53:56 2012] Warning, spatial fit 65 centroid is now closest to src. 67
[Tue Jan 24 13:53:56 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 13:53:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 13:53:56 2012] Assessing source extent using major
[Tue Jan 24 13:53:56 2012] Source does appear to be extended
[Tue Jan 24 13:53:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 13:53:56 2012] Source is confused with source 67
[Wed Jan 25 00:50:30 2012] XMMSAS src. selection expression = ellipse(28814.989899, 26066.715973, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 25 00:50:30 2012] Writing source region out to fullrun_mos1_xmm0551690201_pi300-10000_pass1_cl_src65_src.reg
[Wed Jan 25 00:50:30 2012] Extracting stamp from image fullrun_mos1_xmm0551690201_pi300-10000_cl_sm2.00.img.gz, (294, 263) - (369, 338)
[Wed Jan 25 00:50:30 2012] XMMSAS bgd. selection expression = annulus(28814.989899, 26066.715973, 1087.500000, 2175.000000, X, Y) && !ellipse(28873.033200, 27050.580600, 423.919212, 423.919212, 0.000000, X, Y) && !ellipse(26700.322000, 25750.678000, 1072.472031, 1072.472031, 0.000000, X, Y) && !ellipse(27586.954200, 27197.332600, 542.666416, 542.666416, 0.000000, X, Y) && !ellipse(26956.581000, 27475.323000, 592.954417, 336.698410, 80.060000, X, Y) && !ellipse(30554.969200, 27407.283800, 403.771212, 403.771212, 0.000000, X, Y) && !ellipse(27937.247400, 26758.983800, 429.792812, 429.792812, 0.000000, X, Y) && !ellipse(30333.204681, 23641.747620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26483.600708, 27004.610382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28410.748200, 23924.053600, 365.407211, 365.407211, 0.000000, X, Y) && !ellipse(28658.502000, 25149.146000, 242.532807, 242.532807, 0.000000, X, Y) && !ellipse(28038.860320, 25485.739000, 248.783207, 248.783207, 0.000000, X, Y) && !ellipse(29933.612152, 27357.389435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27699.505890, 26150.495422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27383.713600, 24707.438800, 376.234411, 204.232806, 301.580000, X, Y) && !ellipse(27408.169525, 28591.691315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26681.591553, 28558.283081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29199.764000, 25527.434000, 1222.136035, 1222.136035, 0.000000, X, Y) && !ellipse(27339.051147, 25087.591614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28443.487579, 28813.917267, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 25 00:50:30 2012] Writing fullrun_mos1_xmm0551690201_pi300-10000_pass1_cl_src65.gif
[Wed Jan 25 01:06:16 2012] Mean detx,y = (-300.35, 1247.06) 
[Wed Jan 25 01:06:17 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 25 01:06:25 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 25 01:06:25 2012] Setting source spectrum file to fullrun_mos1_xmm0551690201_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Wed Jan 25 01:06:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551690201_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Wed Jan 25 03:37:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jan 25 03:37:47 2012] rmf not generated due to insufficient counts
[Wed Jan 25 07:12:04 2012] Updating aperture counts using extracted products
[Wed Jan 25 07:12:04 2012] Error reading totcts from fullrun_mos1_xmm0551690201_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Wed Jan 25 07:12:06 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 25 07:12:06 2012] Using photon index=1.80, rate=0.00615, arf fullrun_mos1_xmm0551690201_pi300-10000_pass1_cl_src65.arf
[Wed Jan 25 07:12:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 25 07:12:06 2012] Updating source flux to 6.1e-14
[Wed Jan 25 07:12:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting