[Fri Jun 21 02:17:00 2013] Detection parameters:
  Position = (244.4, 291.8) = 16 3 30.50 -40 20 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.6 +/- 20.8
  Background counts = 156.5
  Rate = 0.002 +/- 0.0004

[Fri Jun 21 02:17:00 2013] Off-axis axis estimate = 3.95'
[Fri Jun 21 03:13:45 2013] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 03:13:45 2013] Initial guess for spatial extent in simple fitting = 8.40"
[Fri Jun 21 03:13:45 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.057
[Fri Jun 21 03:13:45 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.40"
[Fri Jun 21 03:38:14 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jun 21 03:38:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_src8.csv
[Fri Jun 21 03:38:14 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jun 21 03:38:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_src8.csv
[Fri Jun 21 03:38:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:38:14 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jun 21 03:38:14 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jun 21 03:38:14 2013] Fit fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Jun 21 03:38:26 2013] Spatial fit model total counts = 664.397000, observed total counts = 603.000000
[Fri Jun 21 03:38:26 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 21 03:38:26 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:38:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:38:26 2013] Assessing source extent using major
[Fri Jun 21 03:38:26 2013] Source does appear to be extended
[Fri Jun 21 03:38:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 04:23:47 2013] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 04:23:47 2013] Initial guess for spatial extent in simple fitting = 8.40"
[Fri Jun 21 04:23:47 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.057
[Fri Jun 21 04:23:47 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 8.40"
[Fri Jun 21 04:37:58 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jun 21 04:37:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_src8.csv
[Fri Jun 21 04:37:58 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jun 21 04:37:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_src8.csv
[Fri Jun 21 04:37:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 04:37:58 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jun 21 04:37:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jun 21 04:37:58 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jun 21 04:37:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jun 21 04:37:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 04:38:10 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 10.876029 pixels away
[Fri Jun 21 04:38:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 04:38:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 04:38:10 2013] Assessing source extent using major
[Fri Jun 21 04:38:10 2013] Source does appear to be extended
[Fri Jun 21 04:38:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 05:06:19 2013] XMMSAS src. selection expression = ellipse(21213.210907, 25334.350037, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 05:06:19 2013] Writing source region out to fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src10_src.reg
[Fri Jun 21 05:06:19 2013] Extracting stamp from image fullrun_mos2_xmm0551640201_pi300-10000_cl_sm2.00.img.gz, (207, 254) - (282, 329)
[Fri Jun 21 05:06:19 2013] XMMSAS bgd. selection expression = annulus(21213.210907, 25334.350037, 1087.500000, 2175.000000, X, Y)
[Fri Jun 21 05:06:19 2013] Writing fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src10.gif
[Fri Jun 21 05:08:51 2013] Mean detx,y = (5906.24, -1767.48) 
[Fri Jun 21 05:08:52 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 05:09:06 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 05:09:07 2013] Setting source spectrum file to fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun 21 05:09:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun 21 05:10:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 05:10:39 2013] rmf not generated due to insufficient counts
[Fri Jun 21 05:13:27 2013] Updating aperture counts using extracted products
[Fri Jun 21 05:13:27 2013] Total counts from fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 479.00
[Fri Jun 21 05:13:27 2013] Total counts from fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 3124.00
[Fri Jun 21 05:13:27 2013] Got source and background scale factors 1325944.000000, 10556663.000000
[Fri Jun 21 05:13:27 2013] User source parameters:
  Position = (244.4, 291.8) = 16 3 30.50 -40 20 26.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 86.6 +/- 22.9
  Background aperture counts = 392.4
  Rate = 0.002 +/- 0.0004

[Fri Jun 21 05:13:27 2013] Updating counts from extracted products
[Fri Jun 21 05:13:27 2013] Set source signif. to 86.62/19.81 = 4.37
[Fri Jun 21 05:13:28 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 05:13:28 2013] Using photon index=1.80, rate=0.00153, arf fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src10.arf
[Fri Jun 21 05:13:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 05:13:28 2013] Updating source flux to 2.4e-14
[Fri Jun 21 05:13:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 05:13:31 2013] xmm0551640201/analysis//spectral/fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete