[Fri Jun 21 02:17:00 2013] Detection parameters:
  Position = (310.1, 319.2) = 16 3 5.49 -40 18 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 421.0 +/- 31.1
  Background counts = 171.1
  Rate = 0.006 +/- 0.0004

[Fri Jun 21 02:17:00 2013] Off-axis axis estimate = 1.73'
[Fri Jun 21 03:13:45 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 03:13:45 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jun 21 03:13:45 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Fri Jun 21 03:13:45 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Jun 21 03:38:14 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 21 03:38:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 21 03:38:14 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 21 03:38:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 21 03:38:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:38:14 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 21 03:38:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 21 03:38:14 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 21 03:38:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 21 03:38:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:38:26 2013] Source 1 is offset by 6.833358 and 5.864822 pixels which is larger than
2 X fitted extent = 0.838060 x 0.838060, not incorporating fit results
[Fri Jun 21 03:38:26 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:38:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:38:26 2013] Assessing source extent using major
[Fri Jun 21 03:38:26 2013] Source does appear to be extended
[Fri Jun 21 03:38:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 04:23:47 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 04:23:47 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jun 21 04:23:47 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Fri Jun 21 04:23:47 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Fri Jun 21 04:37:57 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 21 04:37:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 21 04:37:58 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 21 04:37:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 21 04:37:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 04:37:58 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 21 04:37:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 21 04:37:58 2013] fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 21 04:37:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jun 21 04:37:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 04:38:10 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.007632 pixels away
[Fri Jun 21 04:38:10 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 04:38:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 04:38:10 2013] Assessing source extent using major
[Fri Jun 21 04:38:10 2013] Source does appear to be extended
[Fri Jun 21 04:38:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 05:06:19 2013] XMMSAS src. selection expression = ellipse(26932.712189, 27718.449524, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 05:06:19 2013] Writing source region out to fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 21 05:06:19 2013] Extracting stamp from image fullrun_mos2_xmm0551640201_pi300-10000_cl_sm2.00.img.gz, (273, 282) - (348, 357)
[Fri Jun 21 05:06:19 2013] XMMSAS bgd. selection expression = annulus(26932.712189, 27718.449524, 1087.500000, 2175.000000, X, Y) && !ellipse(28311.147920, 30185.803200, 377.760811, 377.760811, 0.000000, X, Y)
[Fri Jun 21 05:06:19 2013] Writing fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src1.gif
[Fri Jun 21 05:06:23 2013] Mean detx,y = (44.03, 67.85) 
[Fri Jun 21 05:06:25 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 05:06:34 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 05:06:34 2013] Setting source spectrum file to fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 21 05:06:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 21 05:09:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 05:09:54 2013] rmf not generated due to insufficient counts
[Fri Jun 21 05:13:26 2013] Updating aperture counts using extracted products
[Fri Jun 21 05:13:26 2013] Total counts from fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 662.00
[Fri Jun 21 05:13:26 2013] Total counts from fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 3375.00
[Fri Jun 21 05:13:26 2013] Got source and background scale factors 1244376.000000, 10703924.000000
[Fri Jun 21 05:13:26 2013] User source parameters:
  Position = (310.1, 319.2) = 16 3 5.49 -40 18 26.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 269.6 +/- 26.7
  Background aperture counts = 392.4
  Rate = 0.005 +/- 0.0005

[Fri Jun 21 05:13:26 2013] Updating counts from extracted products
[Fri Jun 21 05:13:26 2013] Set source signif. to 269.64/19.81 = 13.61
[Fri Jun 21 05:13:28 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 05:13:28 2013] Using photon index=1.80, rate=0.00475, arf fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 21 05:13:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 05:13:28 2013] Updating source flux to 6e-14
[Fri Jun 21 05:13:30 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 05:13:31 2013] xmm0551640201/analysis//spectral/fullrun_mos2_xmm0551640201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete