[Fri Jun 21 02:16:31 2013] Detection parameters:
  Position = (278.1, 382.7) = 16 3 17.65 -40 13 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.0 +/- 24.2
  Background counts = 170.5
  Rate = 0.004 +/- 0.0004

[Fri Jun 21 02:16:31 2013] Off-axis axis estimate = 6.29'
[Fri Jun 21 02:58:22 2013] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 02:58:22 2013] Initial guess for spatial extent in simple fitting = 9.57"
[Fri Jun 21 02:58:22 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.029
[Fri Jun 21 02:58:22 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.57"
[Fri Jun 21 03:13:45 2013] fullrun_mos1_xmm0551640201_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun 21 03:13:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551640201_pi300-10000_cl_pass0_src2.csv
[Fri Jun 21 03:13:45 2013] fullrun_mos1_xmm0551640201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun 21 03:13:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551640201_pi300-10000_cl_pass0_src2.csv
[Fri Jun 21 03:13:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551640201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551640201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:13:45 2013] fullrun_mos1_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun 21 03:13:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 21 03:13:45 2013] fullrun_mos1_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun 21 03:13:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun 21 03:13:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551640201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 03:38:22 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.293372 pixels away
[Fri Jun 21 03:38:22 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 03:38:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 03:38:22 2013] Assessing source extent using major
[Fri Jun 21 03:38:22 2013] Source does appear to be extended
[Fri Jun 21 03:38:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 04:11:10 2013] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 04:11:10 2013] Initial guess for spatial extent in simple fitting = 9.57"
[Fri Jun 21 04:11:10 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.029
[Fri Jun 21 04:11:10 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 9.57"
[Fri Jun 21 04:23:46 2013] fullrun_mos1_xmm0551640201_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun 21 04:23:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551640201_pi300-10000_cl_pass1_src2.csv
[Fri Jun 21 04:23:46 2013] fullrun_mos1_xmm0551640201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun 21 04:23:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551640201_pi300-10000_cl_pass1_src2.csv
[Fri Jun 21 04:23:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551640201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551640201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 04:23:47 2013] fullrun_mos1_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun 21 04:23:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 21 04:23:47 2013] fullrun_mos1_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun 21 04:23:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun 21 04:23:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551640201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 21 04:38:07 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.465337 pixels away
[Fri Jun 21 04:38:07 2013] Vigneting correction estimate = 1.000000
[Fri Jun 21 04:38:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 21 04:38:07 2013] Assessing source extent using major
[Fri Jun 21 04:38:07 2013] Source does appear to be extended
[Fri Jun 21 04:38:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 21 04:58:00 2013] XMMSAS src. selection expression = ellipse(24148.871490, 33248.564911, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 21 04:58:00 2013] Writing source region out to fullrun_mos1_xmm0551640201_pi300-10000_pass1_cl_src10_src.reg
[Fri Jun 21 04:58:00 2013] Extracting stamp from image fullrun_mos1_xmm0551640201_pi300-10000_cl_sm2.00.img.gz, (241, 345) - (316, 420)
[Fri Jun 21 04:58:00 2013] XMMSAS bgd. selection expression = annulus(24148.871490, 33248.564911, 1087.500000, 2175.000000, X, Y)
[Fri Jun 21 04:58:00 2013] Writing fullrun_mos1_xmm0551640201_pi300-10000_pass1_cl_src10.gif
[Fri Jun 21 04:58:19 2013] Mean detx,y = (6026.82, -2401.61) 
[Fri Jun 21 04:58:21 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 21 04:58:35 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 21 04:58:36 2013] Setting source spectrum file to fullrun_mos1_xmm0551640201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun 21 04:58:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0551640201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun 21 05:05:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 21 05:05:03 2013] rmf not generated due to insufficient counts
[Fri Jun 21 05:13:20 2013] Updating aperture counts using extracted products
[Fri Jun 21 05:13:20 2013] Total counts from fullrun_mos1_xmm0551640201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 570.00
[Fri Jun 21 05:13:21 2013] Total counts from fullrun_mos1_xmm0551640201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 3270.00
[Fri Jun 21 05:13:21 2013] Got source and background scale factors 1232868.000000, 10419817.000000
[Fri Jun 21 05:13:21 2013] User source parameters:
  Position = (278.1, 382.7) = 16 3 17.65 -40 13 49.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 183.1 +/- 24.9
  Background aperture counts = 386.9
  Rate = 0.003 +/- 0.0004

[Fri Jun 21 05:13:21 2013] Updating counts from extracted products
[Fri Jun 21 05:13:21 2013] Set source signif. to 183.10/19.67 = 9.31
[Fri Jun 21 05:13:25 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 21 05:13:25 2013] Using photon index=1.80, rate=0.00323, arf fullrun_mos1_xmm0551640201_pi300-10000_pass1_cl_src10.arf
[Fri Jun 21 05:13:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 21 05:13:25 2013] Updating source flux to 4.9e-14
[Fri Jun 21 05:13:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 21 05:13:30 2013] xmm0551640201/analysis//spectral/fullrun_mos1_xmm0551640201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete