[Sat Jun 16 13:18:30 2012] Detection parameters:
  Position = (325.1, 512.6) = 8 57 33.53 39 59 20.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.3 +/- 14.2
  Background counts = 32.0
  Rate = 0.004 +/- 0.0006

[Sat Jun 16 13:18:30 2012] Off-axis axis estimate = 15.65'
[Sat Jun 16 13:20:20 2012] Using EEF radius (= 14.25 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 13:20:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 13:20:20 2012] Initial guess for spatial extent in simple fitting = 14.25"
[Sat Jun 16 13:20:20 2012] source mask rpix=3.3, npix_max = 57, mask sum = 54, frac = 0.947
[Sat Jun 16 13:20:20 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 14.25"
[Sat Jun 16 14:09:33 2012] fullrun_pn_xmm0551630601_pi300-10000_cl_pass0_src30.ximg exists
[Sat Jun 16 14:09:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551630601_pi300-10000_cl_pass0_src30.csv
[Sat Jun 16 14:09:33 2012] fullrun_pn_xmm0551630601_pi300-10000_cl_pass0_src30_1.ximg exists
[Sat Jun 16 14:09:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551630601_pi300-10000_cl_pass0_src30.csv
[Sat Jun 16 14:09:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551630601_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551630601_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 14:09:33 2012] fullrun_pn_xmm0551630601_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sat Jun 16 14:09:33 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551630601_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sat Jun 16 14:09:33 2012] fullrun_pn_xmm0551630601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sat Jun 16 14:09:33 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551630601_pi300-10000_cl_pass0_tfrozen_src30.csv
[Sat Jun 16 14:09:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551630601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551630601_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 14:43:02 2012] Spatial fit model total counts = 526.975000, observed total counts = 492.000000
[Sat Jun 16 14:43:02 2012] Offset between fit and detection position for source 30 = 0.294713 pixels
[Sat Jun 16 14:43:02 2012] Warning, changing simple spatial fit ID from 30 to 10
[Sat Jun 16 14:43:02 2012] 536.896300 total counts/ 502.247000 bgd. counts: snr = 1.546094
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.294713 pixels
  Position = (325.3, 512.8) = 8 57 33.47 39 59 19.6
  Extent = 3.5 (3.5-4.7)", rotation angle = 0
  Source counts = 34.6 +/- 23.2
  Background counts = 502.2
  Rate = 0.002 +/- 0.001
  Deleting source due to low Poisson probability