[Sat Jun 16 13:18:48 2012] Detection parameters:
  Position = (401.5, 354.1) = 8 57 4.71 39 47 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.4 +/- 10.6
  Background counts = 22.8
  Rate = 0.002 +/- 0.0006

[Sat Jun 16 13:18:48 2012] Off-axis axis estimate = 8.50'
[Sat Jun 16 14:09:33 2012] Using EEF radius (= 10.68 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 14:09:33 2012] Initial guess for spatial extent in simple fitting = 10.68"
[Sat Jun 16 14:09:33 2012] source mask rpix=2.5, npix_max = 34, mask sum = 30, frac = 0.859
[Sat Jun 16 14:09:33 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.68"
[Sat Jun 16 14:22:54 2012] fullrun_mos1_xmm0551630601_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jun 16 14:22:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551630601_pi300-10000_cl_pass0_src9.csv
[Sat Jun 16 14:22:54 2012] fullrun_mos1_xmm0551630601_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jun 16 14:22:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551630601_pi300-10000_cl_pass0_src9.csv
[Sat Jun 16 14:22:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551630601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551630601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 14:22:55 2012] fullrun_mos1_xmm0551630601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jun 16 14:22:55 2012] fullrun_mos1_xmm0551630601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jun 16 14:22:55 2012] Fit fullrun_mos1_xmm0551630601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Jun 16 14:43:04 2012] Warning, spatial fit 9 centroid is now closest to src. 2
[Sat Jun 16 14:43:04 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 14:43:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 14:43:04 2012] Assessing source extent using major
[Sat Jun 16 14:43:04 2012] Source does appear to be extended
[Sat Jun 16 14:43:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 15:19:52 2012] Using EEF radius (= 10.68 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 15:19:52 2012] Initial guess for spatial extent in simple fitting = 10.68"
[Sat Jun 16 15:19:52 2012] source mask rpix=2.5, npix_max = 34, mask sum = 30, frac = 0.859
[Sat Jun 16 15:19:52 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.68"
[Sat Jun 16 15:34:33 2012] fullrun_mos1_xmm0551630601_pi300-10000_cl_pass1_src9.ximg exists
[Sat Jun 16 15:34:33 2012] fullrun_mos1_xmm0551630601_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Jun 16 15:34:33 2012] Fit fullrun_mos1_xmm0551630601_pi300-10000_cl_pass1_src9 appears to have run properly
[Sat Jun 16 15:34:34 2012] fullrun_mos1_xmm0551630601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Jun 16 15:34:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551630601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Jun 16 15:34:34 2012] fullrun_mos1_xmm0551630601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Jun 16 15:34:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551630601_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Jun 16 15:34:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551630601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551630601_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 15:55:23 2012] Spatial fit model total counts = 329.876000, observed total counts = 323.000000
[Sat Jun 16 15:55:23 2012] Offset between fit and detection position for source 5 = 8.530466 pixels
[Sat Jun 16 15:55:23 2012] 333.467000 total counts/ 173.380000 bgd. counts: snr = 12.157844
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 8.530466 pixels
  Position = (406.0, 346.8) = 8 57 3.04 39 47 17.0
  Extent = 21.3" x 21.3", rotation angle = 0
  Source counts = 160.1 +/- 18.3
  Background counts = 173.4
  Rate = 0.007 +/- 0.0008
[Sat Jun 16 15:55:23 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 15:55:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 15:55:23 2012] Assessing source extent using major
[Sat Jun 16 15:55:23 2012] Source does appear to be extended
[Sat Jun 16 15:55:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 16:20:37 2012] XMMSAS src. selection expression = ellipse(35271.634650, 30125.172139, 1277.670037, 1277.670037, 0.000000, X, Y)
[Sat Jun 16 16:20:37 2012] Writing source region out to fullrun_mos1_xmm0551630601_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun 16 16:20:37 2012] Extracting stamp from image fullrun_mos1_xmm0551630601_pi300-10000_cl_sm2.00.img.gz, (333, 273) - (479, 420)
[Sat Jun 16 16:20:37 2012] XMMSAS bgd. selection expression = annulus(35271.634650, 30125.172139, 2129.450061, 4258.900123, X, Y) && !ellipse(34249.252440, 31422.631200, 455.424813, 455.424813, 0.000000, X, Y)
[Sat Jun 16 16:20:37 2012] Writing fullrun_mos1_xmm0551630601_pi300-10000_pass1_cl_src5.gif
[Sat Jun 16 16:22:06 2012] Mean detx,y = (-2714.67, 8784.89) 
[Sat Jun 16 16:22:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 16:22:51 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 16:22:51 2012] Setting source spectrum file to fullrun_mos1_xmm0551630601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 16 16:22:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551630601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun 16 16:47:40 2012] Updating aperture counts using extracted products
[Sat Jun 16 16:47:40 2012] Error reading totcts from fullrun_mos1_xmm0551630601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 16 16:47:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 16:47:40 2012] Using photon index=1.80, rate=0.00712, arf fullrun_mos1_xmm0551630601_pi300-10000_pass1_cl_src5.arf
[Sat Jun 16 16:47:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 16:47:40 2012] Updating source flux to 9.1e-14