[Fri Feb 24 09:53:10 2012] Detection parameters:
  Position = (358.6, 315.7) = 12 0 33.06 34 16 21.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.2 +/- 22.5
  Background counts = 114.7
  Rate = 0.005 +/- 0.0007

[Fri Feb 24 09:53:11 2012] Off-axis axis estimate = 4.54'
[Fri Feb 24 09:58:32 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 09:58:32 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Fri Feb 24 09:58:32 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.000
[Fri Feb 24 09:58:32 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.70"
[Fri Feb 24 12:06:08 2012] fullrun_pn_xmm0551630301_pi300-10000_cl_pass0_src29.ximg exists
[Fri Feb 24 12:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551630301_pi300-10000_cl_pass0_src29.csv
[Fri Feb 24 12:06:08 2012] fullrun_pn_xmm0551630301_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Feb 24 12:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551630301_pi300-10000_cl_pass0_src29.csv
[Fri Feb 24 12:06:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551630301_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551630301_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 12:06:08 2012] fullrun_pn_xmm0551630301_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Feb 24 12:06:08 2012] fullrun_pn_xmm0551630301_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Feb 24 12:06:08 2012] Fit fullrun_pn_xmm0551630301_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Feb 24 14:17:43 2012] Spatial fit model total counts = 662.357000, observed total counts = 660.000000
[Fri Feb 24 14:17:43 2012] Offset between fit and detection position for source 29 = 7.310420 pixels
[Fri Feb 24 14:17:43 2012] 682.950000 total counts/ 313.867000 bgd. counts: snr = 20.832971
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 7.310420 pixels
  Position = (352.7, 320.0) = 12 0 35.13 34 16 39.2
  Extent = 17.4 (17.3-34.8)", rotation angle = 0
  Source counts = 369.1 +/- 26.1
  Background counts = 313.9
  Rate = 0.01 +/- 0.0007
[Fri Feb 24 14:17:43 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 14:17:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 14:17:43 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 14:17:43 2012] Source does appear to be extended
[Fri Feb 24 14:17:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 14:18:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 14:18:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 14:18:21 2012] Initial guess for spatial extent in simple fitting = 17.40"
[Fri Feb 24 14:18:21 2012] source mask rpix=4.0, npix_max = 80, mask sum = 65, frac = 0.803
[Fri Feb 24 14:18:21 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 17.40"
[Fri Feb 24 16:40:10 2012] fullrun_pn_xmm0551630301_pi300-10000_cl_pass1_src29.ximg exists
[Fri Feb 24 16:40:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551630301_pi300-10000_cl_pass1_src29.csv
[Fri Feb 24 16:40:10 2012] fullrun_pn_xmm0551630301_pi300-10000_cl_pass1_src29_1.ximg exists
[Fri Feb 24 16:40:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551630301_pi300-10000_cl_pass1_src29.csv
[Fri Feb 24 16:40:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551630301_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551630301_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 16:40:11 2012] fullrun_pn_xmm0551630301_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Fri Feb 24 16:40:11 2012] fullrun_pn_xmm0551630301_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Feb 24 16:40:11 2012] Fit fullrun_pn_xmm0551630301_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Feb 24 18:42:05 2012] Source 29 is offset by -6.570920 and 5.280092 pixels which is larger than
2 X fitted extent = 6.255954 x 6.255954, not incorporating fit results
[Fri Feb 24 18:42:05 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 18:42:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 18:42:05 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 18:42:05 2012] Source does appear to be extended
[Fri Feb 24 18:42:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 18:42:42 2012] XMMSAS src. selection expression = ellipse(30636.964000, 27792.736000, 1043.796030, 1043.796030, 0.000000, X, Y)
[Fri Feb 24 18:42:42 2012] Writing source region out to fullrun_pn_xmm0551630301_pi300-10000_pass1_cl_src29_src.reg
[Fri Feb 24 18:42:42 2012] Extracting stamp from image fullrun_pn_xmm0551630301_pi300-10000_cl_sm2.00.img.gz, (293, 260) - (413, 380)
[Fri Feb 24 18:42:42 2012] XMMSAS bgd. selection expression = annulus(30636.964000, 27792.736000, 1739.660050, 3479.320100, X, Y) && !ellipse(26900.051800, 30467.929000, 660.463219, 660.463219, 0.000000, X, Y) && !ellipse(26098.872000, 27744.128000, 1123.256032, 371.706411, 2.465000, X, Y) && !ellipse(31921.928793, 26659.657495, 453.807461, 377.908049, 71.322260, X, Y) && !ellipse(28732.081980, 23946.442400, 369.138411, 369.138411, 0.000000, X, Y) && !ellipse(34340.350000, 29353.496200, 403.486412, 403.486412, 0.000000, X, Y) && !ellipse(33508.465600, 29306.551800, 505.259215, 505.259215, 0.000000, X, Y) && !ellipse(33095.995700, 27834.746000, 374.186411, 374.186411, 0.000000, X, Y) && !ellipse(26692.368317, 27104.497894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33648.337982, 26764.144379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29696.444060, 25314.752000, 395.852011, 395.852011, 0.000000, X, Y)
[Fri Feb 24 18:42:42 2012] Writing fullrun_pn_xmm0551630301_pi300-10000_pass1_cl_src29.gif
[Fri Feb 24 19:16:55 2012] Mean detx,y = (4179.20, 2137.90) 
[Fri Feb 24 19:17:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 19:17:39 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 19:17:40 2012] Setting source spectrum file to fullrun_pn_xmm0551630301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Feb 24 19:17:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551630301_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Feb 24 22:53:37 2012] Updating aperture counts using extracted products
[Fri Feb 24 22:53:37 2012] Error reading totcts from fullrun_pn_xmm0551630301_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Feb 24 22:53:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 22:53:40 2012] Using photon index=1.80, rate=0.0104, arf fullrun_pn_xmm0551630301_pi300-10000_pass1_cl_src29.arf
[Fri Feb 24 22:53:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 22:53:40 2012] Updating source flux to 3.1e-14
[Fri Feb 24 22:55:29 2012] Flag b found in src. 29 procflags, skipping spectral fitting