[Fri Feb 24 09:53:57 2012] Detection parameters:
  Position = (445.2, 244.1) = 12 0 2.73 34 11 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.2 +/- 13.2
  Background counts = 33.9
  Rate = 0.001 +/- 0.0003

[Fri Feb 24 09:53:58 2012] Off-axis axis estimate = 11.34'
[Fri Feb 24 12:06:09 2012] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 12:06:09 2012] Initial guess for spatial extent in simple fitting = 12.10"
[Fri Feb 24 12:06:09 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836
[Fri Feb 24 12:06:09 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 12.10"
[Fri Feb 24 13:19:52 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_src28.ximg exists
[Fri Feb 24 13:19:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_src28.csv
[Fri Feb 24 13:19:52 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Feb 24 13:19:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_src28.csv
[Fri Feb 24 13:19:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 13:19:53 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Feb 24 13:19:53 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Feb 24 13:19:53 2012] Fit fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Feb 24 14:17:53 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 14.490430 pixels away
[Fri Feb 24 14:17:53 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 14:17:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 14:17:53 2012] Assessing source extent using major
[Fri Feb 24 14:17:53 2012] Source does appear to be extended
[Fri Feb 24 14:17:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 16:40:12 2012] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 16:40:12 2012] Initial guess for spatial extent in simple fitting = 12.10"
[Fri Feb 24 16:40:12 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836
[Fri Feb 24 16:40:12 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 12.10"
[Fri Feb 24 17:48:05 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_src28.ximg exists
[Fri Feb 24 17:48:05 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri Feb 24 17:48:05 2012] Fit fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_src28 appears to have run properly
[Fri Feb 24 17:48:05 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri Feb 24 17:48:05 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Feb 24 17:48:05 2012] Fit fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Feb 24 18:42:14 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 14.637470 pixels away
[Fri Feb 24 18:42:14 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 18:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 18:42:14 2012] Assessing source extent using major
[Fri Feb 24 18:42:14 2012] Source does appear to be extended
[Fri Feb 24 18:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 20:49:31 2012] XMMSAS src. selection expression = ellipse(38683.654144, 21192.350342, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Feb 24 20:49:31 2012] Writing source region out to fullrun_mos1_xmm0551630301_pi300-10000_pass1_cl_src30_src.reg
[Fri Feb 24 20:49:31 2012] Extracting stamp from image fullrun_mos1_xmm0551630301_pi300-10000_cl_sm2.00.img.gz, (408, 207) - (483, 282)
[Fri Feb 24 20:49:31 2012] XMMSAS bgd. selection expression = annulus(38683.654144, 21192.350342, 1087.500000, 2175.000000, X, Y)
[Fri Feb 24 20:49:31 2012] Writing fullrun_mos1_xmm0551630301_pi300-10000_pass1_cl_src30.gif
[Fri Feb 24 21:09:30 2012] Mean detx,y = (-11504.70, 7799.93) 
[Fri Feb 24 21:09:31 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 21:09:50 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 21:09:50 2012] Setting source spectrum file to fullrun_mos1_xmm0551630301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Feb 24 21:09:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551630301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Fri Feb 24 22:03:51 2012] Not generating rmf since there are only 67 counts
[Fri Feb 24 22:03:51 2012] rmf not generated due to insufficient counts
[Fri Feb 24 22:53:43 2012] Updating aperture counts using extracted products
[Fri Feb 24 22:53:43 2012] Error reading totcts from fullrun_mos1_xmm0551630301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Fri Feb 24 22:53:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 22:53:45 2012] Using photon index=1.80, rate=0.00133, arf fullrun_mos1_xmm0551630301_pi300-10000_pass1_cl_src30.arf
[Fri Feb 24 22:53:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 22:53:45 2012] Updating source flux to 2.8e-14
[Fri Feb 24 22:53:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting