[Fri Feb 24 09:53:57 2012] Detection parameters:
  Position = (330.8, 275.8) = 12 0 42.83 34 13 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.6 +/- 19.9
  Background counts = 44.1
  Rate = 0.005 +/- 0.0005

[Fri Feb 24 09:53:58 2012] Off-axis axis estimate = 2.87'
[Fri Feb 24 12:06:09 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 12:06:09 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Fri Feb 24 12:06:09 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.174
[Fri Feb 24 12:06:09 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.86"
[Fri Feb 24 13:19:52 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_src6.ximg exists
[Fri Feb 24 13:19:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_src6.csv
[Fri Feb 24 13:19:52 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Feb 24 13:19:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_src6.csv
[Fri Feb 24 13:19:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 13:19:52 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Feb 24 13:19:52 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Feb 24 13:19:52 2012] Fit fullrun_mos1_xmm0551630301_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Feb 24 14:17:53 2012] Spatial fit model total counts = 413.896000, observed total counts = 414.000000
[Fri Feb 24 14:17:53 2012] Offset between fit and detection position for source 12 = 0.093563 pixels
[Fri Feb 24 14:17:53 2012] 414.366000 total counts/ 280.722000 bgd. counts: snr = 7.976479
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.093563 pixels
  Position = (330.8, 275.7) = 12 0 42.84 34 13 26.3
  Extent = 4.8 (4.0-5.5)", rotation angle = 0
  Source counts = 133.6 +/- 20.4
  Background counts = 280.7
  Rate = 0.003 +/- 0.0004
[Fri Feb 24 14:17:53 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 14:17:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 14:17:53 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 14:17:53 2012] Source does appear to be extended
[Fri Feb 24 14:17:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 16:40:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 16:40:11 2012] Initial guess for spatial extent in simple fitting = 4.80"
[Fri Feb 24 16:40:11 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.876
[Fri Feb 24 16:40:11 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 4.80"
[Fri Feb 24 17:48:05 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_src6.ximg exists
[Fri Feb 24 17:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_src6.csv
[Fri Feb 24 17:48:05 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Feb 24 17:48:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_src6.csv
[Fri Feb 24 17:48:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 17:48:05 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Feb 24 17:48:05 2012] fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Feb 24 17:48:05 2012] Fit fullrun_mos1_xmm0551630301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Feb 24 18:42:14 2012] Spatial fit model total counts = 410.001000, observed total counts = 410.000000
[Fri Feb 24 18:42:14 2012] Offset between fit and detection position for source 12 = 0.009436 pixels
[Fri Feb 24 18:42:14 2012] 410.459000 total counts/ 275.625000 bgd. counts: snr = 8.121572
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.009436 pixels
  Position = (330.8, 275.7) = 12 0 42.84 34 13 26.4
  Extent = 4.8 (4.0-5.6)", rotation angle = 0
  Source counts = 134.8 +/- 20.3
  Background counts = 275.6
  Rate = 0.003 +/- 0.0004
[Fri Feb 24 18:42:14 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 18:42:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 18:42:14 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 18:42:14 2012] Source does appear to be extended
[Fri Feb 24 18:42:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 20:49:30 2012] XMMSAS src. selection expression = ellipse(28728.255400, 23935.304800, 290.748957, 290.748957, 0.000000, X, Y)
[Fri Feb 24 20:49:30 2012] Writing source region out to fullrun_mos1_xmm0551630301_pi300-10000_pass1_cl_src12_src.reg
[Fri Feb 24 20:49:30 2012] Extracting stamp from image fullrun_mos1_xmm0551630301_pi300-10000_cl_sm2.00.img.gz, (314, 259) - (347, 292)
[Fri Feb 24 20:49:30 2012] XMMSAS bgd. selection expression = annulus(28728.255400, 23935.304800, 484.581594, 969.163188, X, Y)
[Fri Feb 24 20:49:30 2012] Writing fullrun_mos1_xmm0551630301_pi300-10000_pass1_cl_src12.gif
[Fri Feb 24 21:00:13 2012] Mean detx,y = (-4457.33, 213.18) 
[Fri Feb 24 21:00:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 24 21:00:28 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 24 21:00:29 2012] Setting source spectrum file to fullrun_mos1_xmm0551630301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Feb 24 21:00:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551630301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Feb 24 22:53:42 2012] Updating aperture counts using extracted products
[Fri Feb 24 22:53:42 2012] Error reading totcts from fullrun_mos1_xmm0551630301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Feb 24 22:53:43 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 22:53:43 2012] Using photon index=1.80, rate=0.00287, arf fullrun_mos1_xmm0551630301_pi300-10000_pass1_cl_src12.arf
[Fri Feb 24 22:53:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 24 22:53:44 2012] Updating source flux to 4.4e-14