[Tue Aug 21 09:09:39 2012] Detection parameters:
  Position = (283.9, 397.4) = 2 13 40.55 34 24 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.7 +/- 15.5
  Background counts = 76.9
  Rate = 0.003 +/- 0.0006

[Tue Aug 21 09:09:39 2012] Off-axis axis estimate = 7.25'
[Tue Aug 21 09:47:50 2012] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 09:47:50 2012] Initial guess for spatial extent in simple fitting = 10.05"
[Tue Aug 21 09:47:50 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.949
[Tue Aug 21 09:47:50 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.05"
[Tue Aug 21 10:29:08 2012] fullrun_mos2_xmm0551630201_pi300-10000_cl_pass0_src13.ximg exists
[Tue Aug 21 10:29:08 2012] fullrun_mos2_xmm0551630201_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Aug 21 10:29:08 2012] Fit fullrun_mos2_xmm0551630201_pi300-10000_cl_pass0_src13 appears to have run properly
[Tue Aug 21 10:29:08 2012] fullrun_mos2_xmm0551630201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Aug 21 10:29:08 2012] fullrun_mos2_xmm0551630201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Aug 21 10:29:08 2012] Fit fullrun_mos2_xmm0551630201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Aug 21 10:29:26 2012] Spatial fit model total counts = 286.764000, observed total counts = 263.000000
[Tue Aug 21 10:29:26 2012] Offset between fit and detection position for source 7 = 3.341777 pixels
[Tue Aug 21 10:29:26 2012] 283.710100 total counts/ 219.789000 bgd. counts: snr = 4.311628
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 3.341777 pixels
  Position = (287.1, 396.3) = 2 13 39.44 34 24 36.9
  Extent = 20.1 (20.1-40.2)", rotation angle = 0
  Source counts = 63.9 +/- 16.8
  Background counts = 219.8
  Rate = 0.002 +/- 0.0005
[Tue Aug 21 10:29:26 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 10:29:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 10:29:26 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 10:29:26 2012] Source does appear to be extended
[Tue Aug 21 10:29:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 11:11:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 11:11:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 11:11:43 2012] Initial guess for spatial extent in simple fitting = 20.11"
[Tue Aug 21 11:11:43 2012] source mask rpix=4.6, npix_max = 104, mask sum = 100, frac = 0.953
[Tue Aug 21 11:11:43 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 20.11"
[Tue Aug 21 11:53:11 2012] fullrun_mos2_xmm0551630201_pi300-10000_cl_pass1_src13.ximg exists
[Tue Aug 21 11:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551630201_pi300-10000_cl_pass1_src13.csv
[Tue Aug 21 11:53:11 2012] fullrun_mos2_xmm0551630201_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Aug 21 11:53:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551630201_pi300-10000_cl_pass1_src13.csv
[Tue Aug 21 11:53:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551630201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551630201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 11:53:12 2012] fullrun_mos2_xmm0551630201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Aug 21 11:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551630201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Aug 21 11:53:12 2012] fullrun_mos2_xmm0551630201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Aug 21 11:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551630201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Aug 21 11:53:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551630201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551630201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 11:53:27 2012] Source 7 is offset by -6.840115 and 4.897628 pixels which is larger than
2 X fitted extent = 1.379660 x 3.312699, not incorporating fit results
[Tue Aug 21 11:53:27 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 11:53:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 11:53:27 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 11:53:27 2012] Source does appear to be extended
[Tue Aug 21 11:53:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 12:27:52 2012] XMMSAS src. selection expression = ellipse(24926.214000, 34430.691600, 1206.570035, 1206.570035, 0.000000, X, Y)
[Tue Aug 21 12:27:52 2012] Writing source region out to fullrun_mos2_xmm0551630201_pi300-10000_pass1_cl_src7_src.reg
[Tue Aug 21 12:27:52 2012] Extracting stamp from image fullrun_mos2_xmm0551630201_pi300-10000_cl_sm2.00.img.gz, (218, 327) - (356, 466)
[Tue Aug 21 12:27:52 2012] XMMSAS bgd. selection expression = annulus(24926.214000, 34430.691600, 2010.950058, 4021.900116, X, Y) && !ellipse(28747.042389, 36054.341461, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 12:27:52 2012] Writing fullrun_mos2_xmm0551630201_pi300-10000_pass1_cl_src7.gif
[Tue Aug 21 12:34:40 2012] Mean detx,y = (5351.10, 5727.81) 
[Tue Aug 21 12:34:43 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 12:36:02 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 12:36:03 2012] Setting source spectrum file to fullrun_mos2_xmm0551630201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Aug 21 12:36:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551630201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Aug 21 12:51:04 2012] Not generating rmf since there are only 63 counts
[Tue Aug 21 12:51:04 2012] rmf not generated due to insufficient counts
[Tue Aug 21 12:53:59 2012] Updating aperture counts using extracted products
[Tue Aug 21 12:53:59 2012] Error reading totcts from fullrun_mos2_xmm0551630201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Aug 21 12:54:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 21 12:54:00 2012] Using photon index=1.80, rate=0.00182, arf fullrun_mos2_xmm0551630201_pi300-10000_pass1_cl_src7.arf
[Tue Aug 21 12:54:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 21 12:54:00 2012] Updating source flux to 2.8e-14
[Tue Aug 21 12:54:13 2012] Flag b found in src. 7 procflags, skipping spectral fitting
[Tue Aug 21 12:54:13 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting