[Wed Jun 13 15:55:03 2012] Detection parameters:
  Position = (308.3, 239.4) = 2 23 50.33 34 9 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.5 +/- 10.0
  Background counts = 20.7
  Rate = 0.001 +/- 0.0003

[Wed Jun 13 15:55:03 2012] Off-axis axis estimate = 4.34'
[Wed Jun 13 16:54:27 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 16:54:27 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Wed Jun 13 16:54:27 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.978
[Wed Jun 13 16:54:27 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 8.60"
[Wed Jun 13 17:31:32 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_src32.ximg exists
[Wed Jun 13 17:31:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_src32.csv
[Wed Jun 13 17:31:32 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_src32_1.ximg exists
[Wed Jun 13 17:31:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_src32.csv
[Wed Jun 13 17:31:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 17:31:32 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Wed Jun 13 17:31:32 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Wed Jun 13 17:31:32 2012] Fit fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Wed Jun 13 17:31:49 2012] Spatial fit model total counts = 203.408000, observed total counts = 188.000000
[Wed Jun 13 17:31:49 2012] Offset between fit and detection position for source 30 = 0.122821 pixels
[Wed Jun 13 17:31:49 2012] 205.623700 total counts/ 163.021000 bgd. counts: snr = 3.336686
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.122821 pixels
  Position = (308.2, 239.4) = 2 23 50.37 34 9 50.1
  Extent = 6.2 (4.4-9.0)", rotation angle = 0
  Source counts = 42.6 +/- 14.3
  Background counts = 163.0
  Rate = 0.001 +/- 0.0003
[Wed Jun 13 17:31:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 17:31:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 17:31:49 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 17:31:49 2012] Source does appear to be extended
[Wed Jun 13 17:31:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 18:22:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 18:22:20 2012] Initial guess for spatial extent in simple fitting = 6.22"
[Wed Jun 13 18:22:20 2012] source mask rpix=1.4, npix_max = 14, mask sum = 15, frac = 1.006
[Wed Jun 13 18:22:20 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 6.22"
[Wed Jun 13 18:57:03 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_src29.ximg exists
[Wed Jun 13 18:57:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_src29.csv
[Wed Jun 13 18:57:03 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed Jun 13 18:57:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_src29.csv
[Wed Jun 13 18:57:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 18:57:03 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed Jun 13 18:57:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Jun 13 18:57:03 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Jun 13 18:57:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Jun 13 18:57:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 18:57:16 2012] Warning, spatial fit 29 centroid is now closest to src. 33
[Wed Jun 13 18:57:16 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:57:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:57:16 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 18:57:16 2012] Source does appear to be extended
[Wed Jun 13 18:57:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 19:39:14 2012] XMMSAS src. selection expression = ellipse(26763.208480, 20779.323400, 373.368611, 373.368611, 0.000000, X, Y)
[Wed Jun 13 19:39:14 2012] Writing source region out to fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src30_src.reg
[Wed Jun 13 19:39:14 2012] Extracting stamp from image fullrun_mos2_xmm0551630101_pi300-10000_cl_sm2.00.img.gz, (287, 218) - (330, 261)
[Wed Jun 13 19:39:14 2012] XMMSAS bgd. selection expression = annulus(26763.208480, 20779.323400, 622.281018, 1244.562036, X, Y)
[Wed Jun 13 19:39:14 2012] Writing fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src30.gif
[Wed Jun 13 19:46:23 2012] Mean detx,y = (-1175.34, -6259.12) 
[Wed Jun 13 19:46:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 19:46:38 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 19:46:38 2012] Setting source spectrum file to fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Jun 13 19:46:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed Jun 13 20:05:07 2012] Not generating rmf since there are only 42 counts
[Wed Jun 13 20:05:07 2012] rmf not generated due to insufficient counts
[Wed Jun 13 20:06:31 2012] Updating aperture counts using extracted products
[Wed Jun 13 20:06:31 2012] Error reading totcts from fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Jun 13 20:06:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 20:06:32 2012] Using photon index=1.80, rate=0.00103, arf fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src30.arf
[Wed Jun 13 20:06:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 20:06:32 2012] Updating source flux to 1.5e-14
[Wed Jun 13 20:06:39 2012] Source 30 has fewer than 100.000000 counts, skipping spectral fitting