[Wed Jun 13 15:55:02 2012] Detection parameters:
  Position = (224.5, 222.8) = 2 24 19.68 34 8 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 361.4 +/- 24.1
  Background counts = 19.0
  Rate = 0.02 +/- 0.001

[Wed Jun 13 15:55:03 2012] Off-axis axis estimate = 7.67'
[Wed Jun 13 16:54:27 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 16:54:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 13 16:54:27 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Wed Jun 13 16:54:27 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.918
[Wed Jun 13 16:54:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.26"
[Wed Jun 13 17:31:32 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 17:31:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 17:31:32 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 17:31:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 17:31:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 17:31:32 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 17:31:32 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 17:31:32 2012] Fit fullrun_mos2_xmm0551630101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 13 17:31:49 2012] Spatial fit model total counts = 618.637000, observed total counts = 617.000000
[Wed Jun 13 17:31:49 2012] Offset between fit and detection position for source 2 = 0.115536 pixels
[Wed Jun 13 17:31:49 2012] 618.313000 total counts/ 334.427000 bgd. counts: snr = 15.523631
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.115536 pixels
  Position = (224.6, 222.7) = 2 24 19.65 34 8 37.4
  Extent = 6.8 (6.0-7.5)", rotation angle = 0
  Source counts = 283.9 +/- 24.9
  Background counts = 334.4
  Rate = 0.007 +/- 0.0006
[Wed Jun 13 17:31:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 17:31:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 17:31:49 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 17:31:49 2012] Source does appear to be extended
[Wed Jun 13 17:31:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 18:22:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 18:22:20 2012] Initial guess for spatial extent in simple fitting = 6.82"
[Wed Jun 13 18:22:20 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.936
[Wed Jun 13 18:22:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.82"
[Wed Jun 13 18:57:02 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 18:57:02 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 18:57:02 2012] Fit fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jun 13 18:57:03 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 18:57:03 2012] fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 18:57:03 2012] Fit fullrun_mos2_xmm0551630101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 18:57:16 2012] Spatial fit model total counts = 525.863000, observed total counts = 529.000000
[Wed Jun 13 18:57:16 2012] Offset between fit and detection position for source 2 = 0.012852 pixels
[Wed Jun 13 18:57:16 2012] 525.925000 total counts/ 250.833000 bgd. counts: snr = 17.369432
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.012852 pixels
  Position = (224.6, 222.7) = 2 24 19.65 34 8 37.4
  Extent = 6.7 (5.8-7.3)", rotation angle = 0
  Source counts = 275.1 +/- 22.9
  Background counts = 250.8
  Rate = 0.007 +/- 0.0006
[Wed Jun 13 18:57:16 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:57:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:57:16 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 18:57:16 2012] Source does appear to be extended
[Wed Jun 13 18:57:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 19:39:14 2012] XMMSAS src. selection expression = ellipse(19494.723400, 19329.651800, 401.925012, 401.925012, 0.000000, X, Y)
[Wed Jun 13 19:39:14 2012] Writing source region out to fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun 13 19:39:14 2012] Extracting stamp from image fullrun_mos2_xmm0551630101_pi300-10000_cl_sm2.00.img.gz, (202, 200) - (248, 246)
[Wed Jun 13 19:39:14 2012] XMMSAS bgd. selection expression = annulus(19494.723400, 19329.651800, 669.875019, 1339.750039, X, Y) && !ellipse(18422.864059, 19695.239059, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 19:39:14 2012] Writing fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src2.gif
[Wed Jun 13 19:39:17 2012] Mean detx,y = (5295.81, -9856.50) 
[Wed Jun 13 19:39:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 19:39:26 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 19:39:26 2012] Setting source spectrum file to fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 13 19:39:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 13 20:06:31 2012] Updating aperture counts using extracted products
[Wed Jun 13 20:06:31 2012] Error reading totcts from fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 13 20:06:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 20:06:31 2012] Using photon index=1.80, rate=0.00662, arf fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src2.arf
[Wed Jun 13 20:06:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 20:06:31 2012] Updating source flux to 1.4e-13
[Wed Jun 13 20:07:03 2012] Reading fit data from xmm0551630101/analysis//spectral/fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src2_pl.csv
[Wed Jun 13 20:07:03 2012] Spectral fit parameter nH value = 1.85801e+20
[Wed Jun 13 20:07:03 2012] Spectral fit parameter PhoIndex value = 1.98945
[Wed Jun 13 20:07:03 2012] Failed to get F(0.3-8.0) from xmm0551630101/analysis//spectral/fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Jun 13 20:07:03 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 20:07:03 2012] Using Nh = 1.9e+20, photon index=1.99, rate=0.00662, arf fullrun_mos2_xmm0551630101_pi300-10000_pass1_cl_src2.arf
[Wed Jun 13 20:07:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 20:07:03 2012] Updating source flux to 1.3e-13