[Fri Dec 30 10:31:50 2011] Detection parameters:
  Position = (315.8, 315.0) = 5 38 50.30 -44 5 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13854.9 +/- 140.5
  Background counts = 44.7
  Rate = 0.6 +/- 0.006

[Fri Dec 30 10:31:51 2011] Off-axis axis estimate = 1.74'
[Fri Dec 30 12:05:37 2011] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Dec 30 12:05:37 2011] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Dec 30 12:05:37 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Fri Dec 30 12:05:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Fri Dec 30 12:30:20 2011] fullrun_mos2_xmm0551503301_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 30 12:30:20 2011] fullrun_mos2_xmm0551503301_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 30 12:30:20 2011] Fit fullrun_mos2_xmm0551503301_pi300-10000_cl_pass0_src1 appears to have run properly
[Fri Dec 30 12:30:20 2011] fullrun_mos2_xmm0551503301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 30 12:30:20 2011] fullrun_mos2_xmm0551503301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 30 12:30:20 2011] Fit fullrun_mos2_xmm0551503301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 30 12:30:31 2011] Spatial fit model total counts = 11053.100000, observed total counts = 11037.000000
[Fri Dec 30 12:30:31 2011] Offset between fit and detection position for source 1 = 0.159370 pixels
[Fri Dec 30 12:30:31 2011] 11017.880000 total counts/ 2368.350000 bgd. counts: snr = 177.733612
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.159370 pixels
  Position = (315.7, 315.1) = 5 38 50.36 -44 5 10.2
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 8649.5 +/- 105.0
  Background counts = 2368.3
  Rate = 0.4 +/- 0.005
[Fri Dec 30 12:30:31 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 12:30:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 12:30:31 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 12:30:31 2011] Source does appear to be extended
[Fri Dec 30 12:30:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 13:36:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 30 13:36:40 2011] Initial guess for spatial extent in simple fitting = 5.31"
[Fri Dec 30 13:36:40 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.015
[Fri Dec 30 13:36:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.31"
[Fri Dec 30 13:52:38 2011] fullrun_mos2_xmm0551503301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Dec 30 13:52:38 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551503301_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 13:52:38 2011] fullrun_mos2_xmm0551503301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Dec 30 13:52:38 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551503301_pi300-10000_cl_pass1_src1.csv
[Fri Dec 30 13:52:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551503301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551503301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 13:52:38 2011] fullrun_mos2_xmm0551503301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 30 13:52:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551503301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Dec 30 13:52:38 2011] fullrun_mos2_xmm0551503301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 30 13:52:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551503301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Dec 30 13:52:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551503301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551503301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 13:52:47 2011] Warning, spatial fit 1 centroid is now closest to src. 3
[Fri Dec 30 13:52:47 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 13:52:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 13:52:47 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 13:52:47 2011] Source does appear to be extended
[Fri Dec 30 13:52:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 14:51:22 2011] Counts = 8649.530000, rescaling region sizes by 2.000000
[Fri Dec 30 14:51:22 2011] XMMSAS src. selection expression = ellipse(27414.830200, 27361.756200, 636.603618, 636.603618, 0.000000, X, Y)
[Fri Dec 30 14:51:22 2011] Writing source region out to fullrun_mos2_xmm0551503301_pi300-10000_pass1_cl_src1_src.reg
[Fri Dec 30 14:51:22 2011] Extracting stamp from image fullrun_mos2_xmm0551503301_pi300-10000_cl_sm2.00.img.gz, (279, 278) - (352, 352)
[Fri Dec 30 14:51:22 2011] XMMSAS bgd. selection expression = annulus(27414.830200, 27361.756200, 2122.012061, 4244.024122, X, Y)
[Fri Dec 30 14:51:22 2011] Writing fullrun_mos2_xmm0551503301_pi300-10000_pass1_cl_src1.gif
[Fri Dec 30 14:51:29 2011] Mean detx,y = (29.10, 95.80) 
[Fri Dec 30 14:51:33 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 14:52:22 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 14:52:22 2011] Setting source spectrum file to fullrun_mos2_xmm0551503301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 30 14:52:22 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0551503301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Dec 30 15:01:40 2011] Updating aperture counts using extracted products
[Fri Dec 30 15:01:40 2011] Error reading totcts from fullrun_mos2_xmm0551503301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Dec 30 15:01:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 15:01:40 2011] Using photon index=1.80, rate=0.398, arf fullrun_mos2_xmm0551503301_pi300-10000_pass1_cl_src1.arf
[Fri Dec 30 15:01:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 15:01:40 2011] Updating source flux to 4.1e-12
[Fri Dec 30 15:02:38 2011] Reading fit data from xmm0551503301/analysis//spectral/fullrun_mos2_xmm0551503301_pi300-10000_pass1_cl_src1_pl.csv
[Fri Dec 30 15:02:38 2011] Spectral fit parameter nH value = 3.88291e+19
[Fri Dec 30 15:02:38 2011] Spectral fit parameter PhoIndex value = 1.86257
[Fri Dec 30 15:02:38 2011] Failed to get F(0.3-8.0) from xmm0551503301/analysis//spectral/fullrun_mos2_xmm0551503301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Dec 30 15:02:38 2011] Calculating source flux in energy range 0.30-8.00
[Fri Dec 30 15:02:38 2011] Using Nh = 3.9e+19, photon index=1.86, rate=0.398, arf fullrun_mos2_xmm0551503301_pi300-10000_pass1_cl_src1.arf
[Fri Dec 30 15:02:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Dec 30 15:02:38 2011] Updating source flux to 4e-12