[Thu Dec 29 00:36:34 2011] Detection parameters:
  Position = (204.7, 468.2) = 5 39 35.30 -43 53 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.2 +/- 9.0
  Background counts = 5.6
  Rate = 0.003 +/- 0.0006

[Thu Dec 29 00:36:34 2011] Off-axis axis estimate = 14.06'
[Thu Dec 29 00:55:37 2011] Using EEF radius (= 13.46 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 00:55:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 29 00:55:37 2011] Initial guess for spatial extent in simple fitting = 13.46"
[Thu Dec 29 00:55:37 2011] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.948
[Thu Dec 29 00:55:37 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 13.46"
[Thu Dec 29 01:21:35 2011] fullrun_mos1_xmm0551503201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Dec 29 01:21:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551503201_pi300-10000_cl_pass0_src3.csv
[Thu Dec 29 01:21:35 2011] fullrun_mos1_xmm0551503201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Dec 29 01:21:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551503201_pi300-10000_cl_pass0_src3.csv
[Thu Dec 29 01:21:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551503201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551503201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 01:21:35 2011] fullrun_mos1_xmm0551503201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Dec 29 01:21:35 2011] fullrun_mos1_xmm0551503201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Dec 29 01:21:35 2011] Fit fullrun_mos1_xmm0551503201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Dec 29 01:51:13 2011] Spatial fit model total counts = 102.594000, observed total counts = 101.000000
[Thu Dec 29 01:51:13 2011] Offset between fit and detection position for source 7 = 0.570848 pixels
[Thu Dec 29 01:51:13 2011] 101.824800 total counts/ 66.883300 bgd. counts: snr = 4.272506
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.570848 pixels
  Position = (205.2, 468.4) = 5 39 35.10 -43 53 56.8
  Extent = 6.8 (4.7-11.6)", rotation angle = 0
  Source counts = 34.9 +/- 10.1
  Background counts = 66.9
  Rate = 0.002 +/- 0.0006
[Thu Dec 29 01:51:13 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 01:51:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 01:51:13 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 01:51:13 2011] Source does appear to be extended
[Thu Dec 29 01:51:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 01:51:13 2011] Deleting source due to low Poisson probability 0.9