[Sun Mar 11 15:31:56 2012] Detection parameters:
  Position = (315.2, 300.9) = 5 38 50.69 -44 6 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.2 +/- 10.8
  Background counts = 16.9
  Rate = 0.002 +/- 0.0005

[Sun Mar 11 15:31:56 2012] Off-axis axis estimate = 1.23'
[Sun Mar 11 15:50:28 2012] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 15:50:28 2012] Initial guess for spatial extent in simple fitting = 7.04"
[Sun Mar 11 15:50:28 2012] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.779
[Sun Mar 11 15:50:28 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.04"
[Sun Mar 11 16:09:50 2012] fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_src8.ximg exists
[Sun Mar 11 16:09:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_src8.csv
[Sun Mar 11 16:09:50 2012] fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Mar 11 16:09:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_src8.csv
[Sun Mar 11 16:09:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:09:50 2012] fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Mar 11 16:09:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Mar 11 16:09:50 2012] fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Mar 11 16:09:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Mar 11 16:09:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:33:54 2012] Source 9 is offset by -0.331710 and 4.330371 pixels which is larger than
2 X fitted extent = 0.922336 x 0.922336, not incorporating fit results
[Sun Mar 11 16:33:54 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:33:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:33:54 2012] Assessing source extent using major
[Sun Mar 11 16:33:54 2012] Source does appear to be extended
[Sun Mar 11 16:33:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:33:54 2012] Deleting source due to low Poisson probability 0.9