[Sun Mar 11 15:31:56 2012] Detection parameters:
  Position = (316.3, 314.1) = 5 38 50.26 -44 5 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17030.0 +/- 153.7
  Background counts = 16.9
  Rate = 0.6 +/- 0.006

[Sun Mar 11 15:31:56 2012] Off-axis axis estimate = 1.72'
[Sun Mar 11 15:50:28 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 15:50:28 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Mar 11 15:50:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sun Mar 11 15:50:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Mar 11 16:09:50 2012] fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 11 16:09:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 16:09:50 2012] fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 11 16:09:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 11 16:09:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:09:50 2012] fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 11 16:09:50 2012] fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 11 16:09:50 2012] Fit fullrun_mos1_xmm0551503101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 11 16:33:54 2012] Spatial fit model total counts = 15043.700000, observed total counts = 15011.000000
[Sun Mar 11 16:33:54 2012] Offset between fit and detection position for source 1 = 0.216431 pixels
[Sun Mar 11 16:33:54 2012] 15037.370000 total counts/ 3089.770000 bgd. counts: snr = 214.940175
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.216431 pixels
  Position = (316.1, 314.2) = 5 38 50.35 -44 5 10.3
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 11947.6 +/- 122.6
  Background counts = 3089.8
  Rate = 0.4 +/- 0.004
[Sun Mar 11 16:33:54 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:33:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:33:54 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:33:54 2012] Source does appear to be extended
[Sun Mar 11 16:33:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:38:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 16:38:32 2012] Initial guess for spatial extent in simple fitting = 5.38"
[Sun Mar 11 16:38:32 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.326
[Sun Mar 11 16:38:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.38"
[Sun Mar 11 16:50:33 2012] fullrun_mos1_xmm0551503101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 11 16:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551503101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 16:50:33 2012] fullrun_mos1_xmm0551503101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 11 16:50:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551503101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 16:50:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551503101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551503101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:50:33 2012] fullrun_mos1_xmm0551503101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 11 16:50:33 2012] fullrun_mos1_xmm0551503101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 11 16:50:33 2012] Fit fullrun_mos1_xmm0551503101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 11 16:59:39 2012] Spatial fit model total counts = 15034.400000, observed total counts = 15011.000000
[Sun Mar 11 16:59:39 2012] Offset between fit and detection position for source 1 = 0.000850 pixels
[Sun Mar 11 16:59:39 2012] 15027.880000 total counts/ 3094.580000 bgd. counts: snr = 214.516006
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000850 pixels
  Position = (316.1, 314.2) = 5 38 50.35 -44 5 10.3
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 11933.3 +/- 122.6
  Background counts = 3094.6
  Rate = 0.4 +/- 0.004
[Sun Mar 11 16:59:39 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:59:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:59:39 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:59:39 2012] Source does appear to be extended
[Sun Mar 11 16:59:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 17:38:46 2012] Counts = 11933.300000, rescaling region sizes by 3.000000
[Sun Mar 11 17:38:46 2012] XMMSAS src. selection expression = ellipse(27450.049360, 27286.704600, 966.911428, 966.911428, 0.000000, X, Y)
[Sun Mar 11 17:38:46 2012] Writing source region out to fullrun_mos1_xmm0551503101_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar 11 17:38:46 2012] Extracting stamp from image fullrun_mos1_xmm0551503101_pi300-10000_cl_sm2.00.img.gz, (261, 259) - (372, 370)
[Sun Mar 11 17:38:46 2012] XMMSAS bgd. selection expression = annulus(27450.049360, 27286.704600, 4834.557139, 9669.114278, X, Y) && !ellipse(19417.396881, 36409.005585, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar 11 17:38:46 2012] Writing fullrun_mos1_xmm0551503101_pi300-10000_pass1_cl_src1.gif
[Sun Mar 11 17:38:54 2012] Mean detx,y = (315.45, -244.94) 
[Sun Mar 11 17:38:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 17:41:40 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 17:41:40 2012] Setting source spectrum file to fullrun_mos1_xmm0551503101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 11 17:41:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551503101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar 11 18:03:44 2012] Updating aperture counts using extracted products
[Sun Mar 11 18:03:44 2012] Error reading totcts from fullrun_mos1_xmm0551503101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar 11 18:03:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 18:03:44 2012] Using photon index=1.80, rate=0.417, arf fullrun_mos1_xmm0551503101_pi300-10000_pass1_cl_src1.arf
[Sun Mar 11 18:03:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 18:03:44 2012] Updating source flux to 3.8e-12
[Sun Mar 11 18:04:06 2012] Reading fit data from xmm0551503101/analysis//spectral/fullrun_mos1_xmm0551503101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar 11 18:04:06 2012] Spectral fit parameter nH value = 2.85879e+19
[Sun Mar 11 18:04:06 2012] Spectral fit parameter PhoIndex value = 1.97669
[Sun Mar 11 18:04:06 2012] Failed to get F(0.3-8.0) from xmm0551503101/analysis//spectral/fullrun_mos1_xmm0551503101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar 11 18:04:06 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 18:04:06 2012] Using Nh = 2.9e+19, photon index=1.98, rate=0.417, arf fullrun_mos1_xmm0551503101_pi300-10000_pass1_cl_src1.arf
[Sun Mar 11 18:04:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 18:04:06 2012] Updating source flux to 3.5e-12