[Thu Mar 29 10:40:31 2012] Detection parameters:
  Position = (296.6, 322.0) = 10 46 37.12 13 45 4.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.6 +/- 14.9
  Background counts = 38.8
  Rate = 0.003 +/- 0.0005

[Thu Mar 29 10:40:32 2012] Off-axis axis estimate = 1.72'
[Thu Mar 29 13:03:48 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 13:03:48 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Mar 29 13:03:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Thu Mar 29 13:03:48 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.29"
[Thu Mar 29 14:01:38 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_src20.ximg exists
[Thu Mar 29 14:01:38 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Mar 29 14:01:38 2012] Fit fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_src20 appears to have run properly
[Thu Mar 29 14:01:38 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Mar 29 14:01:38 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Mar 29 14:01:38 2012] Fit fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Mar 29 14:02:01 2012] Source 15 is offset by -9.407280 and 1.016670 pixels which is larger than
2 X fitted extent = 2.552823 x 1.146014, not incorporating fit results
[Thu Mar 29 14:02:01 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 10.592951 pixels away
[Thu Mar 29 14:02:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 14:02:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 14:02:02 2012] Assessing source extent using major
[Thu Mar 29 14:02:02 2012] Source does appear to be extended
[Thu Mar 29 14:02:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 14:02:02 2012] Source is confused with source 1
[Thu Mar 29 16:07:57 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 16:07:57 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Mar 29 16:07:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Thu Mar 29 16:07:57 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 7.29"
[Thu Mar 29 16:56:47 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_src20.ximg exists
[Thu Mar 29 16:56:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_src20.csv
[Thu Mar 29 16:56:47 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Mar 29 16:56:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_src20.csv
[Thu Mar 29 16:56:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 16:56:47 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Mar 29 16:56:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Mar 29 16:56:47 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Mar 29 16:56:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu Mar 29 16:56:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 16:57:05 2012] Source 15 is offset by -9.407280 and 1.016670 pixels which is larger than
2 X fitted extent = 1.970639 x 1.970639, not incorporating fit results
[Thu Mar 29 16:57:05 2012] Source 15 is offset by -6.098499 and 5.725452 pixels which is larger than
2 X fitted extent = 0.837609 x 0.837609, not incorporating fit results
[Thu Mar 29 16:57:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 16:57:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 16:57:05 2012] Assessing source extent using major
[Thu Mar 29 16:57:05 2012] Source does appear to be extended
[Thu Mar 29 16:57:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 19:17:48 2012] XMMSAS src. selection expression = ellipse(25755.830627, 27967.714294, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 29 19:17:48 2012] Writing source region out to fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src15_src.reg
[Thu Mar 29 19:17:48 2012] Extracting stamp from image fullrun_mos2_xmm0551450101_pi300-10000_cl_sm2.00.img.gz, (259, 285) - (334, 360)
[Thu Mar 29 19:17:48 2012] XMMSAS bgd. selection expression = annulus(25755.830627, 27967.714294, 1087.500000, 2175.000000, X, Y) && !ellipse(26360.249000, 27929.522800, 430.096812, 430.096812, 0.000000, X, Y) && !ellipse(27192.982056, 28427.889282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25810.258780, 26707.018200, 377.709611, 377.709611, 0.000000, X, Y)
[Thu Mar 29 19:17:48 2012] Writing fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src15.gif
[Thu Mar 29 19:27:51 2012] Mean detx,y = (360.41, 255.72) 
[Thu Mar 29 19:27:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 19:28:06 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 19:28:06 2012] Setting source spectrum file to fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Mar 29 19:28:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Mar 29 19:54:38 2012] Not generating rmf since there are only 72 counts
[Thu Mar 29 19:54:38 2012] rmf not generated due to insufficient counts
[Thu Mar 29 19:55:48 2012] Updating aperture counts using extracted products
[Thu Mar 29 19:55:48 2012] Error reading totcts from fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Mar 29 19:55:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 19:55:49 2012] Using photon index=1.80, rate=0.00264, arf fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src15.arf
[Thu Mar 29 19:55:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 19:55:49 2012] Updating source flux to 2.6e-14
[Thu Mar 29 19:56:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting