[Thu Mar 29 10:40:30 2012] Detection parameters:
  Position = (303.6, 321.7) = 10 46 35.03 13 45 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 623.8 +/- 31.1
  Background counts = 38.9
  Rate = 0.02 +/- 0.001

[Thu Mar 29 10:40:32 2012] Off-axis axis estimate = 1.73'
[Thu Mar 29 13:03:48 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 13:03:48 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Mar 29 13:03:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Thu Mar 29 13:03:48 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Mar 29 14:01:38 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 29 14:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 14:01:38 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 29 14:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 14:01:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 14:01:38 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 29 14:01:38 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 29 14:01:38 2012] Fit fullrun_mos2_xmm0551450101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 29 14:02:01 2012] Spatial fit model total counts = 959.179000, observed total counts = 899.000000
[Thu Mar 29 14:02:01 2012] Offset between fit and detection position for source 1 = 0.172978 pixels
[Thu Mar 29 14:02:01 2012] 941.616000 total counts/ 605.021000 bgd. counts: snr = 13.684295
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.172978 pixels
  Position = (303.5, 321.6) = 10 46 35.05 13 45 2.7
  Extent = 5.3 (4.7-5.9)", rotation angle = 0
  Source counts = 336.6 +/- 30.7
  Background counts = 605.0
  Rate = 0.01 +/- 0.001
[Thu Mar 29 14:02:01 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 14:02:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 14:02:01 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 14:02:01 2012] Source does appear to be extended
[Thu Mar 29 14:02:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 14:02:02 2012] Source is confused with source 15
[Thu Mar 29 16:07:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 16:07:57 2012] Initial guess for spatial extent in simple fitting = 5.30"
[Thu Mar 29 16:07:57 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.762
[Thu Mar 29 16:07:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.30"
[Thu Mar 29 16:56:46 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 29 16:56:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 16:56:46 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 29 16:56:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 16:56:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 16:56:47 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 29 16:56:47 2012] fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 29 16:56:47 2012] Fit fullrun_mos2_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 29 16:57:05 2012] Spatial fit model total counts = 959.075000, observed total counts = 900.000000
[Thu Mar 29 16:57:05 2012] Offset between fit and detection position for source 1 = 0.022232 pixels
[Thu Mar 29 16:57:05 2012] 950.825000 total counts/ 609.156000 bgd. counts: snr = 13.843354
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.022232 pixels
  Position = (303.5, 321.6) = 10 46 35.04 13 45 2.7
  Extent = 5.4 (4.7-5.7)", rotation angle = 0
  Source counts = 341.7 +/- 30.8
  Background counts = 609.2
  Rate = 0.01 +/- 0.001
[Thu Mar 29 16:57:05 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 16:57:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 16:57:05 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 16:57:05 2012] Source does appear to be extended
[Thu Mar 29 16:57:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 19:17:48 2012] XMMSAS src. selection expression = ellipse(26360.249000, 27929.522800, 322.572609, 322.572609, 0.000000, X, Y)
[Thu Mar 29 19:17:48 2012] Writing source region out to fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src1_src.reg
[Thu Mar 29 19:17:48 2012] Extracting stamp from image fullrun_mos2_xmm0551450101_pi300-10000_cl_sm2.00.img.gz, (285, 303) - (322, 340)
[Thu Mar 29 19:17:48 2012] XMMSAS bgd. selection expression = annulus(26360.249000, 27929.522800, 537.621015, 1075.242031, X, Y) && !ellipse(27192.982056, 28427.889282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25810.258780, 26707.018200, 377.709611, 377.709611, 0.000000, X, Y) && !ellipse(25755.830627, 27967.714294, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 19:17:48 2012] Writing fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src1.gif
[Thu Mar 29 19:17:52 2012] Mean detx,y = (73.74, 102.26) 
[Thu Mar 29 19:17:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 19:18:08 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 19:18:08 2012] Setting source spectrum file to fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 19:18:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Mar 29 19:55:47 2012] Updating aperture counts using extracted products
[Thu Mar 29 19:55:47 2012] Error reading totcts from fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Mar 29 19:55:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 19:55:48 2012] Using photon index=1.80, rate=0.0144, arf fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 29 19:55:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 19:55:48 2012] Updating source flux to 1.9e-13
[Thu Mar 29 19:56:36 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Mar 29 19:57:33 2012] Reading fit data from xmm0551450101/analysis//spectral/fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Mar 29 19:57:33 2012] Spectral fit parameter nH value = 8.87872e+20
[Thu Mar 29 19:57:33 2012] Spectral fit parameter PhoIndex value = 2.27117
[Thu Mar 29 19:57:33 2012] Failed to get F(0.3-8.0) from xmm0551450101/analysis//spectral/fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Mar 29 19:57:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 19:57:33 2012] Using Nh = 8.9e+20, photon index=2.27, rate=0.0144, arf fullrun_mos2_xmm0551450101_pi300-10000_pass1_cl_src1.arf
[Thu Mar 29 19:57:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 19:57:33 2012] Updating source flux to 1.7e-13