[Thu Mar 29 10:39:45 2012] Detection parameters:
  Position = (229.2, 403.7) = 10 46 57.26 13 50 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 377.0 +/- 24.9
  Background counts = 37.9
  Rate = 0.02 +/- 0.002

[Thu Mar 29 10:39:46 2012] Off-axis axis estimate = 9.14'
[Thu Mar 29 12:00:09 2012] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 12:00:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 29 12:00:09 2012] Initial guess for spatial extent in simple fitting = 11.00"
[Thu Mar 29 12:00:09 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.982
[Thu Mar 29 12:00:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.00"
[Thu Mar 29 13:03:47 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar 29 13:03:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 13:03:47 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar 29 13:03:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_src1.csv
[Thu Mar 29 13:03:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 13:03:48 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar 29 13:03:48 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar 29 13:03:48 2012] Fit fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar 29 14:01:55 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.962734 pixels away
[Thu Mar 29 14:01:55 2012] Spatial fit model total counts = 477.856000, observed total counts = 477.000000
[Thu Mar 29 14:01:55 2012] Offset between fit and detection position for source 8 = 0.293157 pixels
[Thu Mar 29 14:01:55 2012] Warning, changing simple spatial fit ID from 1 to 8
[Thu Mar 29 14:01:55 2012] 476.946000 total counts/ 305.163000 bgd. counts: snr = 9.833639
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.293157 pixels
  Position = (229.0, 403.4) = 10 46 57.30 13 50 58.7
  Extent = 5.4 (4.5-6.6)" x 3.9 (3.2-4.8)", rotation angle = 315 (291-338) degrees
  Source counts = 171.8 +/- 21.8
  Background counts = 305.2
  Rate = 0.007 +/- 0.0009
[Thu Mar 29 14:01:55 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 14:01:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 14:01:55 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 14:01:55 2012] Source does appear to be extended
[Thu Mar 29 14:01:55 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.94
[Thu Mar 29 14:01:55 2012] Source is confused with source 12
[Thu Mar 29 15:14:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 15:14:05 2012] Initial guess for spatial extent in simple fitting = 4.63"
[Thu Mar 29 15:14:05 2012] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.225
[Thu Mar 29 15:14:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.63"
[Thu Mar 29 16:07:57 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Mar 29 16:07:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 16:07:57 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Mar 29 16:07:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_src1.csv
[Thu Mar 29 16:07:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 16:07:57 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Mar 29 16:07:57 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Mar 29 16:07:57 2012] Fit fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Mar 29 16:57:02 2012] Spatial fit model total counts = 480.085000, observed total counts = 481.000000
[Thu Mar 29 16:57:02 2012] Offset between fit and detection position for source 8 = 0.079426 pixels
[Thu Mar 29 16:57:02 2012] 480.248000 total counts/ 259.177000 bgd. counts: snr = 13.731992
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.079426 pixels
  Position = (229.1, 403.4) = 10 46 57.29 13 50 58.4
  Extent = 6.0 (5.1-6.9)", rotation angle = 0
  Source counts = 221.1 +/- 21.9
  Background counts = 259.2
  Rate = 0.009 +/- 0.0009
[Thu Mar 29 16:57:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 16:57:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 16:57:02 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 16:57:02 2012] Source does appear to be extended
[Thu Mar 29 16:57:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 18:52:45 2012] XMMSAS src. selection expression = ellipse(19881.379200, 35044.793200, 362.122810, 362.122810, 0.000000, X, Y)
[Thu Mar 29 18:52:45 2012] Writing source region out to fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src8_src.reg
[Thu Mar 29 18:52:45 2012] Extracting stamp from image fullrun_mos1_xmm0551450101_pi300-10000_cl_sm2.00.img.gz, (208, 383) - (250, 424)
[Thu Mar 29 18:52:45 2012] XMMSAS bgd. selection expression = annulus(19881.379200, 35044.793200, 603.538017, 1207.076035, X, Y) && !ellipse(19565.511673, 35448.559357, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 18:52:45 2012] Writing fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src8.gif
[Thu Mar 29 18:52:49 2012] Mean detx,y = (9267.82, -3821.40) 
[Thu Mar 29 18:52:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 18:53:05 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 18:53:05 2012] Setting source spectrum file to fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Mar 29 18:53:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Mar 29 19:55:45 2012] Updating aperture counts using extracted products
[Thu Mar 29 19:55:45 2012] Error reading totcts from fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Mar 29 19:55:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 19:55:46 2012] Using photon index=1.80, rate=0.00935, arf fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src8.arf
[Thu Mar 29 19:55:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 19:55:46 2012] Updating source flux to 2e-13
[Thu Mar 29 19:55:51 2012] Flag c found in src. 8 procflags, skipping spectral fitting
[Thu Mar 29 19:56:36 2012] Reading fit data from xmm0551450101/analysis//spectral/fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src8_pl.csv
[Thu Mar 29 19:56:36 2012] Spectral fit parameter nH value = 1.87397e+18
[Thu Mar 29 19:56:36 2012] Spectral fit parameter PhoIndex value = 2.03218
[Thu Mar 29 19:56:36 2012] Failed to get F(0.3-8.0) from xmm0551450101/analysis//spectral/fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Thu Mar 29 19:56:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 19:56:36 2012] Using Nh = 1.9e+18, photon index=2.03, rate=0.00935, arf fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src8.arf
[Thu Mar 29 19:56:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 19:56:36 2012] Updating source flux to 1.8e-13