[Thu Mar 29 10:39:46 2012] Detection parameters:
  Position = (310.7, 379.7) = 10 46 32.90 13 49 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.6 +/- 15.6
  Background counts = 41.2
  Rate = 0.005 +/- 0.0006

[Thu Mar 29 10:39:46 2012] Off-axis axis estimate = 5.96'
[Thu Mar 29 12:00:09 2012] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 12:00:09 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Thu Mar 29 12:00:09 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.881
[Thu Mar 29 12:00:09 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 9.41"
[Thu Mar 29 13:03:48 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_src9.ximg exists
[Thu Mar 29 13:03:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_src9.csv
[Thu Mar 29 13:03:48 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Mar 29 13:03:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_src9.csv
[Thu Mar 29 13:03:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 13:03:48 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Mar 29 13:03:48 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Mar 29 13:03:48 2012] Fit fullrun_mos1_xmm0551450101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Mar 29 14:01:55 2012] Spatial fit model total counts = 272.084000, observed total counts = 267.000000
[Thu Mar 29 14:01:55 2012] Offset between fit and detection position for source 14 = 0.123641 pixels
[Thu Mar 29 14:01:55 2012] 273.975300 total counts/ 199.308000 bgd. counts: snr = 5.288933
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.123641 pixels
  Position = (310.8, 379.8) = 10 46 32.88 13 49 16.0
  Extent = 5.8 (4.2-7.9)", rotation angle = 0
  Source counts = 74.7 +/- 16.6
  Background counts = 199.3
  Rate = 0.003 +/- 0.0007
[Thu Mar 29 14:01:55 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 14:01:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 14:01:55 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 14:01:55 2012] Source does appear to be extended
[Thu Mar 29 14:01:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 15:14:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 15:14:05 2012] Initial guess for spatial extent in simple fitting = 5.84"
[Thu Mar 29 15:14:05 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.177
[Thu Mar 29 15:14:05 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 5.84"
[Thu Mar 29 16:07:57 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_src8.ximg exists
[Thu Mar 29 16:07:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_src8.csv
[Thu Mar 29 16:07:57 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Mar 29 16:07:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_src8.csv
[Thu Mar 29 16:07:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 16:07:57 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Mar 29 16:07:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Mar 29 16:07:57 2012] fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Mar 29 16:07:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Mar 29 16:07:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551450101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 16:57:02 2012] Warning, spatial fit 8 centroid is now closest to src. 13
[Thu Mar 29 16:57:02 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 16:57:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 16:57:02 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 16:57:02 2012] Source does appear to be extended
[Thu Mar 29 16:57:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 18:52:45 2012] XMMSAS src. selection expression = ellipse(26991.495020, 32994.808400, 350.574610, 350.574610, 0.000000, X, Y)
[Thu Mar 29 18:52:45 2012] Writing source region out to fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src14_src.reg
[Thu Mar 29 18:52:45 2012] Extracting stamp from image fullrun_mos1_xmm0551450101_pi300-10000_cl_sm2.00.img.gz, (291, 360) - (331, 400)
[Thu Mar 29 18:52:45 2012] XMMSAS bgd. selection expression = annulus(26991.495020, 32994.808400, 584.291017, 1168.582034, X, Y)
[Thu Mar 29 18:52:45 2012] Writing fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src14.gif
[Thu Mar 29 18:55:25 2012] Mean detx,y = (4846.32, 2128.07) 
[Thu Mar 29 18:55:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 18:55:34 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 18:55:35 2012] Setting source spectrum file to fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Mar 29 18:55:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu Mar 29 19:15:58 2012] Not generating rmf since there are only 74 counts
[Thu Mar 29 19:15:58 2012] rmf not generated due to insufficient counts
[Thu Mar 29 19:55:45 2012] Updating aperture counts using extracted products
[Thu Mar 29 19:55:45 2012] Error reading totcts from fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu Mar 29 19:55:46 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 19:55:46 2012] Using photon index=1.80, rate=0.00316, arf fullrun_mos1_xmm0551450101_pi300-10000_pass1_cl_src14.arf
[Thu Mar 29 19:55:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 19:55:46 2012] Updating source flux to 4.6e-14
[Thu Mar 29 19:55:51 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting