[Thu Aug  9 11:04:27 2012] Detection parameters:
  Position = (267.4, 411.8) = 6 36 47.59 35 42 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.5 +/- 14.6
  Background counts = 64.3
  Rate = 0.004 +/- 0.0009

[Thu Aug  9 11:04:28 2012] Off-axis axis estimate = 8.52'
[Thu Aug  9 11:27:43 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 11:27:43 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Thu Aug  9 11:27:43 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.029
[Thu Aug  9 11:27:43 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.69"
[Thu Aug  9 11:40:48 2012] fullrun_mos1_xmm0551430601_pi300-10000_cl_pass0_src6.ximg exists
[Thu Aug  9 11:40:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551430601_pi300-10000_cl_pass0_src6.csv
[Thu Aug  9 11:40:48 2012] fullrun_mos1_xmm0551430601_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Aug  9 11:40:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551430601_pi300-10000_cl_pass0_src6.csv
[Thu Aug  9 11:40:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551430601_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551430601_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 11:40:48 2012] fullrun_mos1_xmm0551430601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Aug  9 11:40:48 2012] fullrun_mos1_xmm0551430601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Aug  9 11:40:48 2012] Fit fullrun_mos1_xmm0551430601_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Aug  9 12:17:26 2012] Spatial fit model total counts = 307.169000, observed total counts = 307.000000
[Thu Aug  9 12:17:26 2012] Offset between fit and detection position for source 3 = 5.890308 pixels
[Thu Aug  9 12:17:26 2012] 316.317400 total counts/ 223.035000 bgd. counts: snr = 6.246161
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 5.890308 pixels
  Position = (262.1, 409.2) = 6 36 49.47 35 42 14.6
  Extent = 21.4 (21.3-42.8)", rotation angle = 0
  Source counts = 93.3 +/- 17.8
  Background counts = 223.0
  Rate = 0.004 +/- 0.0008
[Thu Aug  9 12:17:26 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 12:17:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 12:17:26 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 12:17:26 2012] Source does appear to be extended
[Thu Aug  9 12:17:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 12:31:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 12:31:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  9 12:31:34 2012] Initial guess for spatial extent in simple fitting = 21.38"
[Thu Aug  9 12:31:34 2012] source mask rpix=4.9, npix_max = 117, mask sum = 121, frac = 1.032
[Thu Aug  9 12:31:34 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 21.38"
[Thu Aug  9 12:44:54 2012] fullrun_mos1_xmm0551430601_pi300-10000_cl_pass1_src5.ximg exists
[Thu Aug  9 12:44:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551430601_pi300-10000_cl_pass1_src5.csv
[Thu Aug  9 12:44:54 2012] fullrun_mos1_xmm0551430601_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Aug  9 12:44:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551430601_pi300-10000_cl_pass1_src5.csv
[Thu Aug  9 12:44:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551430601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551430601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 12:44:54 2012] fullrun_mos1_xmm0551430601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Aug  9 12:44:54 2012] fullrun_mos1_xmm0551430601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Aug  9 12:44:54 2012] Fit fullrun_mos1_xmm0551430601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Aug  9 13:22:33 2012] Warning, spatial fit 5 centroid is now closest to src. 2
[Thu Aug  9 13:22:33 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 13:22:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 13:22:33 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 13:22:33 2012] Source does appear to be extended
[Thu Aug  9 13:22:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 13:35:24 2012] XMMSAS src. selection expression = ellipse(22754.806000, 35549.012000, 1282.656037, 1282.656037, 0.000000, X, Y)
[Thu Aug  9 13:35:24 2012] Writing source region out to fullrun_mos1_xmm0551430601_pi300-10000_pass1_cl_src3_src.reg
[Thu Aug  9 13:35:24 2012] Extracting stamp from image fullrun_mos1_xmm0551430601_pi300-10000_cl_sm2.00.img.gz, (188, 335) - (336, 483)
[Thu Aug  9 13:35:24 2012] XMMSAS bgd. selection expression = annulus(22754.806000, 35549.012000, 2137.760062, 4275.520123, X, Y) && !ellipse(25849.184113, 36737.212341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23754.398600, 31713.424200, 436.054413, 436.054413, 0.000000, X, Y)
[Thu Aug  9 13:35:24 2012] Writing fullrun_mos1_xmm0551430601_pi300-10000_pass1_cl_src3.gif
[Thu Aug  9 13:36:53 2012] Mean detx,y = (8515.99, -3530.87) 
[Thu Aug  9 13:36:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 13:37:54 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 13:37:54 2012] Setting source spectrum file to fullrun_mos1_xmm0551430601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug  9 13:37:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551430601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Aug  9 13:44:01 2012] Not generating rmf since there are only 93 counts
[Thu Aug  9 13:44:01 2012] rmf not generated due to insufficient counts
[Thu Aug  9 14:12:30 2012] Updating aperture counts using extracted products
[Thu Aug  9 14:12:30 2012] Error reading totcts from fullrun_mos1_xmm0551430601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug  9 14:12:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 14:12:30 2012] Using photon index=1.80, rate=0.00433, arf fullrun_mos1_xmm0551430601_pi300-10000_pass1_cl_src3.arf
[Thu Aug  9 14:12:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 14:12:30 2012] Updating source flux to 6.1e-14
[Thu Aug  9 14:12:33 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting