[Sun May 19 02:41:28 2013] Detection parameters:
  Position = (232.1, 426.0) = 12 28 25.82 -48 42 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.6 +/- 20.7
  Background counts = 40.0
  Rate = 0.007 +/- 0.0007

[Sun May 19 02:41:28 2013] Off-axis axis estimate = 10.43'
[Sun May 19 02:45:52 2013] Using EEF radius (= 11.64 ")to estimate initial spatial extent for simple fitting
[Sun May 19 02:45:52 2013] Initial guess for spatial extent in simple fitting = 11.64"
[Sun May 19 02:45:52 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.892
[Sun May 19 02:45:52 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 11.64"
[Sun May 19 05:25:43 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_src48.ximg exists
[Sun May 19 05:25:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_src48.csv
[Sun May 19 05:25:43 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_src48_1.ximg exists
[Sun May 19 05:25:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_src48.csv
[Sun May 19 05:25:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 05:25:44 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sun May 19 05:25:44 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sun May 19 05:25:44 2013] Fit fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Sun May 19 06:40:49 2013] Spatial fit model total counts = 734.175000, observed total counts = 715.000000
[Sun May 19 06:40:49 2013] Offset between fit and detection position for source 49 = 1.525186 pixels
[Sun May 19 06:40:49 2013] 717.555000 total counts/ 493.648000 bgd. counts: snr = 10.077643
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 1.525186 pixels
  Position = (231.7, 427.5) = 12 28 26.00 -48 42 39.2
  Extent = 10.1 (7.9-12.8)", rotation angle = 0
  Source counts = 223.9 +/- 26.8
  Background counts = 493.6
  Rate = 0.008 +/- 0.0009
[Sun May 19 06:40:49 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:40:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:40:49 2013] Assessing source extent using major axis lower bound
[Sun May 19 06:40:49 2013] Source does appear to be extended
[Sun May 19 06:40:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:40:49 2013] Source is confused with source 5
[Sun May 19 06:41:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 19 06:41:03 2013] Initial guess for spatial extent in simple fitting = 10.09"
[Sun May 19 06:41:03 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.944
[Sun May 19 06:41:03 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 10.09"
[Sun May 19 08:33:41 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_src43.ximg exists
[Sun May 19 08:33:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_src43.csv
[Sun May 19 08:33:41 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_src43_1.ximg exists
[Sun May 19 08:33:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_src43.csv
[Sun May 19 08:33:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 08:33:42 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sun May 19 08:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sun May 19 08:33:42 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sun May 19 08:33:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sun May 19 08:33:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 09:14:30 2013] Warning, spatial fit 43 centroid is now closest to src. 17
[Sun May 19 09:14:30 2013] Vigneting correction estimate = 1.000000
[Sun May 19 09:14:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 09:14:30 2013] Assessing source extent using major axis lower bound
[Sun May 19 09:14:30 2013] Source does appear to be extended
[Sun May 19 09:14:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 09:14:42 2013] XMMSAS src. selection expression = ellipse(20111.226400, 37144.223600, 605.130017, 605.130017, 0.000000, X, Y)
[Sun May 19 09:14:42 2013] Writing source region out to fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src49_src.reg
[Sun May 19 09:14:42 2013] Extracting stamp from image fullrun_pn_xmm0551430401_pi300-10000_cl_sm2.00.img.gz, (197, 393) - (266, 462)
[Sun May 19 09:14:42 2013] XMMSAS bgd. selection expression = annulus(20111.226400, 37144.223600, 1008.550029, 2017.100058, X, Y) && !ellipse(20493.120200, 36210.666000, 2311.416067, 513.743215, 66.903000, X, Y) && !ellipse(20789.874600, 35486.857400, 1748.264050, 449.573613, 246.880000, X, Y) && !ellipse(21374.701600, 34046.662000, 2042.808059, 427.301612, 65.513500, X, Y) && !ellipse(21155.870800, 34544.636800, 2065.144059, 404.656812, 66.473000, X, Y) && !ellipse(21489.606600, 33762.555800, 2069.664060, 470.449614, 67.092700, X, Y)
[Sun May 19 09:14:42 2013] Writing fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src49.gif
[Sun May 19 09:59:49 2013] Mean detx,y = (76.81, 13958.66) 
[Sun May 19 09:59:52 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 10:00:06 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 10:00:06 2013] Setting source spectrum file to fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Sun May 19 10:00:06 2013] Setting bgd. spectrum file to fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Sun May 19 11:56:04 2013] Updating aperture counts using extracted products
[Sun May 19 11:56:04 2013] Total counts from fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 476.00
[Sun May 19 11:56:04 2013] Total counts from fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src49_bgd.pi.gz = 576.00
[Sun May 19 11:56:04 2013] Got source and background scale factors 939504.000000, 646489.000000
[Sun May 19 11:56:04 2013] User source parameters:
  Position = (231.7, 427.5) = 12 28 26.00 -48 42 39.2
  Extent = 10.1 (7.9-12.8)", rotation angle = 0
  Source aperture counts = -361.1 +/- 22.8
  Background aperture counts = 837.1
  Rate = -0.01 +/- 0.0008

[Sun May 19 11:56:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 11:56:05 2013] Using photon index=1.80, rate=0.0077, arf fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src49.arf
[Sun May 19 11:56:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 11:56:05 2013] Updating source flux to 6e-14
[Sun May 19 11:56:18 2013] Flag c found in src. 49 procflags, skipping spectral fitting
[Sun May 19 11:56:43 2013] xmm0551430401/analysis//spectral/fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete