[Sun May 19 02:41:27 2013] Detection parameters:
  Position = (256.8, 283.2) = 12 28 15.03 -48 53 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.4 +/- 14.8
  Background counts = 56.4
  Rate = 0.003 +/- 0.0006

[Sun May 19 02:41:28 2013] Off-axis axis estimate = 3.21'
[Sun May 19 02:45:52 2013] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Sun May 19 02:45:52 2013] Initial guess for spatial extent in simple fitting = 8.04"
[Sun May 19 02:45:52 2013] source mask rpix=1.8, npix_max = 22, mask sum = 21, frac = 0.953
[Sun May 19 02:45:52 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 8.04"
[Sun May 19 05:25:43 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_src36.ximg exists
[Sun May 19 05:25:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_src36.csv
[Sun May 19 05:25:43 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_src36_1.ximg exists
[Sun May 19 05:25:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_src36.csv
[Sun May 19 05:25:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 05:25:44 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sun May 19 05:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sun May 19 05:25:44 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sun May 19 05:25:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_tfrozen_src36.csv
[Sun May 19 05:25:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551430401_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 06:40:49 2013] Source 36 is offset by -6.061091 and -7.060446 pixels which is larger than
2 X fitted extent = 0.923637 x 2.990653, not incorporating fit results
[Sun May 19 06:40:49 2013] Vigneting correction estimate = 1.000000
[Sun May 19 06:40:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 06:40:49 2013] Assessing source extent using major
[Sun May 19 06:40:49 2013] Source does appear to be extended
[Sun May 19 06:40:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 06:41:03 2013] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Sun May 19 06:41:03 2013] Initial guess for spatial extent in simple fitting = 8.04"
[Sun May 19 06:41:03 2013] source mask rpix=1.8, npix_max = 22, mask sum = 21, frac = 0.953
[Sun May 19 06:41:03 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 8.04"
[Sun May 19 08:33:41 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_src32.ximg exists
[Sun May 19 08:33:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_src32.csv
[Sun May 19 08:33:41 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_src32_1.ximg exists
[Sun May 19 08:33:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_src32.csv
[Sun May 19 08:33:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 08:33:41 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sun May 19 08:33:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sun May 19 08:33:41 2013] fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sun May 19 08:33:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sun May 19 08:33:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551430401_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 09:14:30 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 15.525764 pixels away
[Sun May 19 09:14:30 2013] Source 36 is offset by 7.206242 and 6.382060 pixels which is larger than
2 X fitted extent = 0.923637 x 0.923637, not incorporating fit results
[Sun May 19 09:14:30 2013] Vigneting correction estimate = 1.000000
[Sun May 19 09:14:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 19 09:14:30 2013] Assessing source extent using major
[Sun May 19 09:14:30 2013] Source does appear to be extended
[Sun May 19 09:14:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 09:14:42 2013] XMMSAS src. selection expression = ellipse(22294.591064, 24586.821228, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 09:14:42 2013] Writing source region out to fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src36_src.reg
[Sun May 19 09:14:42 2013] Extracting stamp from image fullrun_pn_xmm0551430401_pi300-10000_cl_sm2.00.img.gz, (219, 246) - (294, 321)
[Sun May 19 09:14:42 2013] XMMSAS bgd. selection expression = annulus(22294.591064, 24586.821228, 1087.500000, 2175.000000, X, Y) && !ellipse(25514.892600, 23857.386020, 1437.184841, 1419.345641, 68.235096, X, Y) && !ellipse(23853.754400, 24208.901400, 1209.400035, 495.271214, 12.208984, X, Y) && !ellipse(23984.462400, 27638.146000, 1216.312035, 374.980011, 64.935900, X, Y) && !ellipse(24093.149800, 27369.359600, 1536.240044, 400.165612, 65.799900, X, Y) && !ellipse(24450.245200, 26441.043400, 1500.440043, 401.313612, 68.183000, X, Y) && !ellipse(24652.360626, 25958.141205, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 19 09:14:42 2013] Writing fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src36.gif
[Sun May 19 09:52:05 2013] Mean detx,y = (2685.09, 1551.52) 
[Sun May 19 09:52:08 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 09:52:31 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 09:52:31 2013] Setting source spectrum file to fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sun May 19 09:52:31 2013] Setting bgd. spectrum file to fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sun May 19 10:56:48 2013] Not generating rmf since there are only 78 counts
[Sun May 19 10:56:48 2013] rmf not generated due to insufficient counts
[Sun May 19 11:56:01 2013] Updating aperture counts using extracted products
[Sun May 19 11:56:01 2013] Total counts from fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 437.00
[Sun May 19 11:56:01 2013] Total counts from fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src36_bgd.pi.gz = 3114.00
[Sun May 19 11:56:01 2013] Got source and background scale factors 1131075.000000, 8199242.000000
[Sun May 19 11:56:01 2013] User source parameters:
  Position = (256.8, 283.2) = 12 28 15.03 -48 53 6.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 7.4 +/- 21.9
  Background aperture counts = 429.6
  Rate = 0.0003 +/- 0.0008

[Sun May 19 11:56:01 2013] Updating counts from extracted products
[Sun May 19 11:56:01 2013] Set source signif. to 7.43/20.73 = 0.36
[Sun May 19 11:56:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 19 11:56:05 2013] Using photon index=1.80, rate=0.000256, arf fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src36.arf
[Sun May 19 11:56:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 19 11:56:05 2013] Updating source flux to 8.6e-16
[Sun May 19 11:56:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 19 11:56:43 2013] xmm0551430401/analysis//spectral/fullrun_pn_xmm0551430401_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete