[Tue Jul  3 08:10:59 2012] Detection parameters:
  Position = (277.5, 377.9) = 15 9 33.09 -66 42 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.7 +/- 20.6
  Background counts = 74.1
  Rate = 0.01 +/- 0.001

[Tue Jul  3 08:11:00 2012] Off-axis axis estimate = 5.96'
[Tue Jul  3 08:13:10 2012] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 08:13:10 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Tue Jul  3 08:13:10 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.058
[Tue Jul  3 08:13:10 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 9.41"
[Tue Jul  3 09:14:29 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_src14.ximg exists
[Tue Jul  3 09:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_src14.csv
[Tue Jul  3 09:14:29 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue Jul  3 09:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_src14.csv
[Tue Jul  3 09:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 09:14:29 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue Jul  3 09:14:29 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Jul  3 09:14:29 2012] Fit fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Tue Jul  3 10:22:53 2012] Warning, spatial fit 14 centroid is now closest to src. 18
[Tue Jul  3 10:22:53 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 10:22:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 10:22:53 2012] Assessing source extent using major
[Tue Jul  3 10:22:53 2012] Source does appear to be extended
[Tue Jul  3 10:22:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 10:23:10 2012] Using EEF radius (= 9.41 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 10:23:10 2012] Initial guess for spatial extent in simple fitting = 9.41"
[Tue Jul  3 10:23:10 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.058
[Tue Jul  3 10:23:10 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 9.41"
[Tue Jul  3 11:39:14 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_src14.ximg exists
[Tue Jul  3 11:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_src14.csv
[Tue Jul  3 11:39:14 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue Jul  3 11:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_src14.csv
[Tue Jul  3 11:39:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 11:39:15 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue Jul  3 11:39:15 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Jul  3 11:39:15 2012] Fit fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Tue Jul  3 12:44:24 2012] Spatial fit model total counts = 1214.980000, observed total counts = 1215.000000
[Tue Jul  3 12:44:24 2012] Offset between fit and detection position for source 14 = 0.725042 pixels
[Tue Jul  3 12:44:24 2012] 1157.714000 total counts/ 906.643000 bgd. counts: snr = 8.338317
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.725042 pixels
  Position = (277.1, 377.3) = 15 9 33.37 -66 42 9.2
  Extent = 12.0 (8.7-16.2)", rotation angle = 0
  Source counts = 251.1 +/- 34.0
  Background counts = 906.6
  Rate = 0.009 +/- 0.001
[Tue Jul  3 12:44:24 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 12:44:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 12:44:24 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 12:44:24 2012] Source does appear to be extended
[Tue Jul  3 12:44:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 12:44:37 2012] XMMSAS src. selection expression = ellipse(24060.727920, 32774.056600, 718.074021, 718.074021, 0.000000, X, Y)
[Tue Jul  3 12:44:37 2012] Writing source region out to fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src14_src.reg
[Tue Jul  3 12:44:37 2012] Extracting stamp from image fullrun_pn_xmm0551430301_pi300-10000_cl_sm2.00.img.gz, (236, 336) - (318, 419)
[Tue Jul  3 12:44:37 2012] XMMSAS bgd. selection expression = annulus(24060.727920, 32774.056600, 1196.790034, 2393.580069, X, Y) && !ellipse(23807.936700, 35147.362000, 883.864025, 883.864025, 0.000000, X, Y) && !ellipse(21938.244980, 34962.065063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23844.694660, 34820.913800, 756.950422, 756.950422, 0.000000, X, Y) && !ellipse(23114.187767, 34123.470212, 438.507918, 290.700868, 353.532347, X, Y) && !ellipse(23922.677200, 33946.815800, 800.952023, 800.952023, 0.000000, X, Y) && !ellipse(25398.708800, 32694.459000, 604.170417, 604.170417, 0.000000, X, Y) && !ellipse(21889.466880, 32212.417000, 420.360812, 420.360812, 0.000000, X, Y) && !ellipse(22397.922150, 31985.716156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24194.533760, 31731.249180, 1006.736029, 1006.736029, 0.000000, X, Y) && !ellipse(24205.875800, 30832.544800, 751.184822, 751.184822, 0.000000, X, Y) && !ellipse(24357.546173, 29701.071411, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 12:44:37 2012] Writing fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src14.gif
[Tue Jul  3 12:55:58 2012] Mean detx,y = (99.51, 8477.27) 
[Tue Jul  3 12:56:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 12:56:21 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 12:56:21 2012] Setting source spectrum file to fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jul  3 12:56:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jul  3 14:42:34 2012] Updating aperture counts using extracted products
[Tue Jul  3 14:42:34 2012] Error reading totcts from fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jul  3 14:42:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 14:42:34 2012] Using photon index=1.80, rate=0.00876, arf fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src14.arf
[Tue Jul  3 14:42:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 14:42:34 2012] Updating source flux to 3.4e-14