[Tue Jul  3 08:10:59 2012] Detection parameters:
  Position = (287.2, 277.8) = 15 9 26.05 -66 49 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79033.7 +/- 333.6
  Background counts = 84.3
  Rate = 3 +/- 0.01

[Tue Jul  3 08:11:00 2012] Off-axis axis estimate = 1.71'
[Tue Jul  3 08:13:10 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 08:13:10 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jul  3 08:13:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Tue Jul  3 08:13:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Tue Jul  3 09:14:29 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul  3 09:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 09:14:29 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul  3 09:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_src1.csv
[Tue Jul  3 09:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 09:14:29 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul  3 09:14:29 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul  3 09:14:29 2012] Fit fullrun_pn_xmm0551430301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul  3 10:22:53 2012] Spatial fit model total counts = 67675.000000, observed total counts = 67675.000000
[Tue Jul  3 10:22:53 2012] Offset between fit and detection position for source 1 = 0.158579 pixels
[Tue Jul  3 10:22:53 2012] 67616.100000 total counts/ 13801.300000 bgd. counts: snr = 458.080424
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.158579 pixels
  Position = (287.1, 277.6) = 15 9 26.07 -66 49 22.7
  Extent = 5.8 (5.8-5.8)", rotation angle = 0
  Source counts = 53814.8 +/- 260.0
  Background counts = 13801.3
  Rate = 2 +/- 0.009
[Tue Jul  3 10:22:53 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 10:22:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 10:22:53 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 10:22:53 2012] Source does appear to be extended
[Tue Jul  3 10:22:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 10:23:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 10:23:10 2012] Initial guess for spatial extent in simple fitting = 5.80"
[Tue Jul  3 10:23:10 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.893
[Tue Jul  3 10:23:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.80"
[Tue Jul  3 11:39:14 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul  3 11:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_src1.csv
[Tue Jul  3 11:39:14 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul  3 11:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_src1.csv
[Tue Jul  3 11:39:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 11:39:14 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul  3 11:39:14 2012] fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul  3 11:39:14 2012] Fit fullrun_pn_xmm0551430301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul  3 12:44:24 2012] Spatial fit model total counts = 67991.200000, observed total counts = 67742.000000
[Tue Jul  3 12:44:24 2012] Offset between fit and detection position for source 1 = 0.011297 pixels
[Tue Jul  3 12:44:24 2012] 68163.200000 total counts/ 14363.500000 bgd. counts: snr = 448.900113
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.011297 pixels
  Position = (287.1, 277.6) = 15 9 26.07 -66 49 22.7
  Extent = 5.8 (5.8-5.8)", rotation angle = 0
  Source counts = 53799.7 +/- 261.1
  Background counts = 14363.5
  Rate = 2 +/- 0.009
[Tue Jul  3 12:44:24 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 12:44:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 12:44:24 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 12:44:24 2012] Source does appear to be extended
[Tue Jul  3 12:44:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 12:44:37 2012] Counts = 53799.700000, rescaling region sizes by 3.000000
[Tue Jul  3 12:44:37 2012] XMMSAS src. selection expression = ellipse(24931.974280, 24104.837600, 1044.126030, 1044.126030, 0.000000, X, Y)
[Tue Jul  3 12:44:37 2012] Writing source region out to fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul  3 12:44:37 2012] Extracting stamp from image fullrun_pn_xmm0551430301_pi300-10000_cl_sm2.00.img.gz, (227, 218) - (347, 338)
[Tue Jul  3 12:44:37 2012] XMMSAS bgd. selection expression = annulus(24931.974280, 24104.837600, 5220.630150, 10441.260300, X, Y) && !ellipse(23807.936700, 35147.362000, 883.864025, 883.864025, 0.000000, X, Y) && !ellipse(21938.244980, 34962.065063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23844.694660, 34820.913800, 756.950422, 756.950422, 0.000000, X, Y) && !ellipse(23114.187767, 34123.470212, 438.507918, 290.700868, 353.532347, X, Y) && !ellipse(35318.829000, 33916.760600, 352.145610, 352.145610, 0.000000, X, Y) && !ellipse(23922.677200, 33946.815800, 800.952023, 800.952023, 0.000000, X, Y) && !ellipse(25398.708800, 32694.459000, 604.170417, 604.170417, 0.000000, X, Y) && !ellipse(24060.727920, 32774.056600, 957.432028, 957.432028, 0.000000, X, Y) && !ellipse(14559.918564, 32386.455658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21889.466880, 32212.417000, 420.360812, 420.360812, 0.000000, X, Y) && !ellipse(22397.922150, 31985.716156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24194.533760, 31731.249180, 1006.736029, 1006.736029, 0.000000, X, Y) && !ellipse(24205.875800, 30832.544800, 751.184822, 751.184822, 0.000000, X, Y) && !ellipse(16436.774704, 30417.759399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24357.546173, 29701.071411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13837.348358, 29502.663727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15038.629400, 29309.032600, 446.946413, 446.946413, 0.000000, X, Y) && !ellipse(24408.841200, 29249.122000, 622.578418, 622.578418, 0.000000, X, Y) && !ellipse(19003.270721, 29041.503723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34034.040618, 28929.991469, 903.066377, 291.060482, 110.328994, X, Y) && !ellipse(24421.825800, 29028.110000, 1035.776030, 1035.776030, 0.000000, X, Y) && !ellipse(16648.369919, 27737.839203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24470.297580, 27764.668800, 1173.640034, 1173.640034, 0.000000, X, Y) && !ellipse(17926.883347, 27521.932220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36107.623616, 12596.830497, 1130.760033, 323.344721, 313.461814, X, Y) && !ellipse(27276.132263, 26621.263977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24678.257782, 26755.056213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25745.990178, 20626.766645, 501.057459, 290.559741, 90.051882, X, Y) && !ellipse(26438.744800, 19741.550000, 382.842411, 382.842411, 0.000000, X, Y) && !ellipse(26306.889923, 18910.261063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26853.220000, 18256.342000, 352.803210, 352.803210, 0.000000, X, Y) && !ellipse(29475.760315, 15103.789368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16983.102737, 15248.925217, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 12:44:37 2012] Writing fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src1.gif
[Tue Jul  3 12:45:05 2012] Mean detx,y = (105.23, -218.91) 
[Tue Jul  3 12:45:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 12:48:28 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 12:48:29 2012] Setting source spectrum file to fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul  3 12:48:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul  3 14:42:33 2012] Updating aperture counts using extracted products
[Tue Jul  3 14:42:33 2012] Error reading totcts from fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul  3 14:42:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 14:42:34 2012] Using photon index=1.80, rate=1.88, arf fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src1.arf
[Tue Jul  3 14:42:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 14:42:34 2012] Updating source flux to 4.5e-12
[Tue Jul  3 14:45:48 2012] Reading fit data from xmm0551430301/analysis//spectral/fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jul  3 14:45:48 2012] Spectral fit parameter nH value = 597159000000.0
[Tue Jul  3 14:45:48 2012] Spectral fit parameter PhoIndex value = 1.02124
[Tue Jul  3 14:45:48 2012] Failed to get F(0.3-8.0) from xmm0551430301/analysis//spectral/fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jul  3 14:45:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 14:45:48 2012] Using Nh = 6e+11, photon index=1.02, rate=1.88, arf fullrun_pn_xmm0551430301_pi300-10000_pass1_cl_src1.arf
[Tue Jul  3 14:45:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 14:45:48 2012] Updating source flux to 7.7e-12