[Sat Jul 21 23:52:52 2012] Detection parameters:
  Position = (297.9, 213.5) = 11 55 18.57 23 19 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.9 +/- 22.8
  Background counts = 183.9
  Rate = 0.003 +/- 0.0006

[Sat Jul 21 23:52:52 2012] Off-axis axis estimate = 6.16'
[Sat Jul 21 23:58:25 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 23:58:25 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Sat Jul 21 23:58:25 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.040
[Sat Jul 21 23:58:25 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 9.51"
[Sun Jul 22 03:24:46 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src81.ximg exists
[Sun Jul 22 03:24:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src81.csv
[Sun Jul 22 03:24:46 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src81_1.ximg exists
[Sun Jul 22 03:24:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src81.csv
[Sun Jul 22 03:24:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 03:24:47 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Sun Jul 22 03:24:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src81.csv
[Sun Jul 22 03:24:47 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Sun Jul 22 03:24:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src81.csv
[Sun Jul 22 03:24:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 09:08:49 2012] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 91 at 11.608547 pixels away
[Sun Jul 22 09:08:49 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 09:08:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 09:08:49 2012] Assessing source extent using major
[Sun Jul 22 09:08:49 2012] Source does appear to be extended
[Sun Jul 22 09:08:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 09:09:39 2012] Using EEF radius (= 9.51 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 09:09:39 2012] Initial guess for spatial extent in simple fitting = 9.51"
[Sun Jul 22 09:09:39 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.040
[Sun Jul 22 09:09:39 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 9.51"
[Sun Jul 22 12:32:41 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src69.ximg exists
[Sun Jul 22 12:32:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src69.csv
[Sun Jul 22 12:32:42 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src69_1.ximg exists
[Sun Jul 22 12:32:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src69.csv
[Sun Jul 22 12:32:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 12:32:43 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Sun Jul 22 12:32:43 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Sun Jul 22 12:32:43 2012] Fit fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Sun Jul 22 16:42:46 2012] Spatial fit model total counts = 5878.720000, observed total counts = 5825.000000
[Sun Jul 22 16:42:46 2012] Offset between fit and detection position for source 91 = 3.393042 pixels
[Sun Jul 22 16:42:46 2012] Warning, changing simple spatial fit ID from 69 to 67
[Sun Jul 22 16:42:46 2012] 6025.028000 total counts/ 5584.620000 bgd. counts: snr = 5.893298
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 3.393042 pixels
  Position = (294.6, 214.5) = 11 55 19.59 23 19 54.2
  Extent = 30.5 (30.4-61.0)", rotation angle = 0
  Source counts = 440.4 +/- 77.6
  Background counts = 5584.6
  Rate = 0.009 +/- 0.002
[Sun Jul 22 16:42:46 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:42:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:42:46 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 16:42:46 2012] Source does appear to be extended
[Sun Jul 22 16:42:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 16:42:46 2012] Source is confused with source 86
[Sun Jul 22 16:42:46 2012] Source is confused with source 87
[Sun Jul 22 16:42:46 2012] Source is confused with source 93
[Sun Jul 22 16:43:24 2012] XMMSAS src. selection expression = ellipse(25583.722000, 18612.936000, 1829.136053, 1829.136053, 0.000000, X, Y)
[Sun Jul 22 16:43:24 2012] Writing source region out to fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src91_src.reg
[Sun Jul 22 16:43:24 2012] Extracting stamp from image fullrun_pn_xmm0551280201_pi300-10000_cl_sm2.00.img.gz, (190, 109) - (400, 320)
[Sun Jul 22 16:43:24 2012] XMMSAS bgd. selection expression = annulus(25583.722000, 18612.936000, 3048.560088, 6097.120175, X, Y) && !ellipse(26372.551453, 22869.027893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26067.631740, 23886.117800, 3493.968101, 3493.968101, 0.000000, X, Y) && !ellipse(24983.980000, 24189.940000, 1170.960034, 1170.960034, 0.000000, X, Y) && !ellipse(19353.511566, 21269.765686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25464.279205, 22255.280701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22008.524933, 18313.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27800.914734, 25379.963440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27351.492615, 21706.945465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28133.621765, 24947.376862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19657.473923, 24299.520508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23630.216827, 23698.281158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25377.007200, 21202.572000, 1380.432040, 1380.432040, 0.000000, X, Y) && !ellipse(26281.069763, 20409.955688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19564.084595, 17628.888168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25093.850000, 25687.632000, 1469.328042, 1469.328042, 184.495173, X, Y) && !ellipse(28688.477753, 25269.968231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29347.389648, 23914.100525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28878.997345, 22048.832260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22203.386826, 21984.684097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28615.923767, 21619.474197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.860718, 20752.141174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28386.472000, 20445.763800, 1408.400041, 1408.400041, 0.000000, X, Y) && !ellipse(26977.186584, 15359.119553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26737.697632, 19954.221237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25757.796200, 19792.780000, 1219.424035, 1219.424035, 0.000000, X, Y) && !ellipse(27450.973907, 19594.561676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24478.780121, 18229.141174, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 22 16:43:24 2012] Writing fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src91.gif
[Sun Jul 22 18:19:42 2012] Mean detx,y = (2311.95, -4597.96) 
[Sun Jul 22 18:19:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 18:21:00 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 18:21:01 2012] Setting source spectrum file to fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Sun Jul 22 18:21:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Mon Jul 23 21:04:11 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:04:11 2012] Error reading totcts from fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Mon Jul 23 21:04:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:04:13 2012] Using photon index=1.80, rate=0.00907, arf fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src91.arf
[Mon Jul 23 21:04:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:04:13 2012] Updating source flux to 2.5e-14
[Mon Jul 23 21:07:55 2012] Flag c found in src. 91 procflags, skipping spectral fitting