[Sat Jul 21 23:52:50 2012] Detection parameters:
  Position = (435.4, 355.2) = 11 54 35.09 23 30 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 276.1 +/- 25.2
  Background counts = 91.8
  Rate = 0.005 +/- 0.0004

[Sat Jul 21 23:52:52 2012] Off-axis axis estimate = 10.74'
[Sat Jul 21 23:58:25 2012] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 23:58:25 2012] Initial guess for spatial extent in simple fitting = 11.80"
[Sat Jul 21 23:58:25 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.017
[Sat Jul 21 23:58:25 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.80"
[Sun Jul 22 03:24:46 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jul 22 03:24:46 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src23.csv
[Sun Jul 22 03:24:46 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jul 22 03:24:46 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src23.csv
[Sun Jul 22 03:24:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 03:24:47 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jul 22 03:24:47 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jul 22 03:24:47 2012] Fit fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Jul 22 09:08:49 2012] Source 27 is offset by -2.944726 and -3.543921 pixels which is larger than
2 X fitted extent = 1.350336 x 1.350336, not incorporating fit results
[Sun Jul 22 09:08:49 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 14.498620 pixels away
[Sun Jul 22 09:08:49 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 09:08:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 09:08:49 2012] Assessing source extent using major
[Sun Jul 22 09:08:49 2012] Source does appear to be extended
[Sun Jul 22 09:08:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 09:09:39 2012] Using EEF radius (= 11.80 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 09:09:39 2012] Initial guess for spatial extent in simple fitting = 11.80"
[Sun Jul 22 09:09:39 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.017
[Sun Jul 22 09:09:39 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 11.80"
[Sun Jul 22 12:32:41 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src23.ximg exists
[Sun Jul 22 12:32:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src23.csv
[Sun Jul 22 12:32:41 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun Jul 22 12:32:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src23.csv
[Sun Jul 22 12:32:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 12:32:42 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun Jul 22 12:32:42 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun Jul 22 12:32:42 2012] Fit fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun Jul 22 16:42:46 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 15.714857 pixels away
[Sun Jul 22 16:42:46 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:42:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:42:46 2012] Assessing source extent using major
[Sun Jul 22 16:42:46 2012] Source does appear to be extended
[Sun Jul 22 16:42:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 16:43:22 2012] XMMSAS src. selection expression = ellipse(37827.640839, 30849.846832, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jul 22 16:43:22 2012] Writing source region out to fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src27_src.reg
[Sun Jul 22 16:43:22 2012] Extracting stamp from image fullrun_pn_xmm0551280201_pi300-10000_cl_sm2.00.img.gz, (398, 318) - (473, 393)
[Sun Jul 22 16:43:22 2012] XMMSAS bgd. selection expression = annulus(37827.640839, 30849.846832, 1087.500000, 2175.000000, X, Y) && !ellipse(37093.411800, 32044.485200, 361.890410, 361.890410, 0.000000, X, Y)
[Sun Jul 22 16:43:22 2012] Writing fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src27.gif
[Sun Jul 22 17:40:40 2012] Mean detx,y = (-13917.03, 450.14) 
[Sun Jul 22 17:40:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 17:41:08 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 17:41:08 2012] Setting source spectrum file to fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sun Jul 22 17:41:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon Jul 23 06:31:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 06:31:06 2012] rmf not generated due to insufficient counts
[Mon Jul 23 21:04:09 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:04:09 2012] Error reading totcts from fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Jul 23 21:04:11 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:04:11 2012] Using photon index=1.80, rate=0.00465, arf fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src27.arf
[Mon Jul 23 21:04:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:04:11 2012] Updating source flux to 3e-14
[Mon Jul 23 21:07:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting