[Sat Jul 21 23:52:50 2012] Detection parameters:
  Position = (197.5, 269.8) = 11 55 50.29 23 23 58.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1175.7 +/- 40.2
  Background counts = 74.5
  Rate = 0.02 +/- 0.0007

[Sat Jul 21 23:52:52 2012] Off-axis axis estimate = 7.61'
[Sat Jul 21 23:58:25 2012] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 23:58:25 2012] Initial guess for spatial extent in simple fitting = 10.23"
[Sat Jul 21 23:58:25 2012] source mask rpix=2.4, npix_max = 32, mask sum = 24, frac = 0.738
[Sat Jul 21 23:58:25 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.23"
[Sun Jul 22 03:24:45 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jul 22 03:24:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src9.csv
[Sun Jul 22 03:24:45 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jul 22 03:24:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src9.csv
[Sun Jul 22 03:24:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 03:24:46 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jul 22 03:24:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jul 22 03:24:46 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jul 22 03:24:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jul 22 03:24:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 09:08:49 2012] Warning, spatial fit 9 centroid is now closest to src. 10
[Sun Jul 22 09:08:49 2012] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.584028 pixels away
[Sun Jul 22 09:08:49 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 09:08:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 09:08:49 2012] Assessing source extent using major
[Sun Jul 22 09:08:49 2012] Source does appear to be extended
[Sun Jul 22 09:08:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 09:09:39 2012] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 09:09:39 2012] Initial guess for spatial extent in simple fitting = 10.23"
[Sun Jul 22 09:09:39 2012] source mask rpix=2.4, npix_max = 32, mask sum = 24, frac = 0.738
[Sun Jul 22 09:09:39 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.23"
[Sun Jul 22 12:32:41 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jul 22 12:32:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src9.csv
[Sun Jul 22 12:32:41 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jul 22 12:32:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src9.csv
[Sun Jul 22 12:32:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 12:32:42 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jul 22 12:32:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Jul 22 12:32:42 2012] fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jul 22 12:32:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Jul 22 12:32:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 16:42:46 2012] Warning, spatial fit 9 centroid is now closest to src. 10
[Sun Jul 22 16:42:46 2012] Source 11 is offset by 6.573893 and 4.739919 pixels which is larger than
2 X fitted extent = 1.237485 x 1.237485, not incorporating fit results
[Sun Jul 22 16:42:46 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:42:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:42:46 2012] Assessing source extent using major
[Sun Jul 22 16:42:46 2012] Source does appear to be extended
[Sun Jul 22 16:42:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 16:43:22 2012] Counts = 1175.678223, rescaling region sizes by 2.000000
[Sun Jul 22 16:43:22 2012] XMMSAS src. selection expression = ellipse(17131.716675, 23427.584991, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jul 22 16:43:22 2012] Writing source region out to fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src11_src.reg
[Sun Jul 22 16:43:22 2012] Extracting stamp from image fullrun_pn_xmm0551280201_pi300-10000_cl_sm2.00.img.gz, (122, 195) - (272, 345)
[Sun Jul 22 16:43:22 2012] XMMSAS bgd. selection expression = annulus(17131.716675, 23427.584991, 4350.000000, 8700.000000, X, Y) && !ellipse(26372.551453, 22869.027893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26067.631740, 23886.117800, 3493.968101, 3493.968101, 0.000000, X, Y) && !ellipse(12584.627213, 32059.608276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26071.834869, 28686.579407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21108.142105, 27602.185791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24983.980000, 24189.940000, 1170.960034, 1170.960034, 0.000000, X, Y) && !ellipse(18134.405746, 24470.961060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14350.069031, 21205.117050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19353.511566, 21269.765686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25464.279205, 22255.280701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22008.524933, 18313.467560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15294.614288, 26514.667206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19657.473923, 24299.520508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23630.216827, 23698.281158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25377.007200, 21202.572000, 1380.432040, 1380.432040, 0.000000, X, Y) && !ellipse(26281.069763, 20409.955688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19564.084595, 17628.888168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13798.457489, 17320.282166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19452.762980, 32070.156600, 366.472011, 366.472011, 0.000000, X, Y) && !ellipse(15990.773590, 29501.593750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25593.616302, 28381.091736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.026520, 27510.603210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25093.850000, 25687.632000, 1469.328042, 1469.328042, 184.495173, X, Y) && !ellipse(22808.719400, 25763.219000, 411.145612, 411.145612, 0.000000, X, Y) && !ellipse(15722.689972, 23799.708588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22203.386826, 21984.684097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25757.796200, 19792.780000, 1219.424035, 1219.424035, 0.000000, X, Y) && !ellipse(25583.722000, 18612.936000, 2438.848070, 2438.848070, 0.000000, X, Y) && !ellipse(24478.780121, 18229.141174, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 22 16:43:22 2012] Writing fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src11.gif
[Sun Jul 22 17:19:06 2012] Mean detx,y = (7814.03, 3303.54) 
[Sun Jul 22 17:19:11 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 17:22:53 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 17:22:54 2012] Setting source spectrum file to fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Jul 22 17:22:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon Jul 23 05:49:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 05:49:11 2012] rmf not generated due to insufficient counts
[Mon Jul 23 21:04:09 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:04:09 2012] Error reading totcts from fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon Jul 23 21:04:11 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:04:11 2012] Using photon index=1.80, rate=0.0198, arf fullrun_pn_xmm0551280201_pi300-10000_pass1_cl_src11.arf
[Mon Jul 23 21:04:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:04:11 2012] Updating source flux to 7.4e-14
[Mon Jul 23 21:07:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting