[Sat Jul 21 23:54:11 2012] Detection parameters:
  Position = (315.9, 248.3) = 11 55 12.87 23 22 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.0 +/- 25.9
  Background counts = 216.9
  Rate = 0.003 +/- 0.0005

[Sat Jul 21 23:54:12 2012] Off-axis axis estimate = 3.85'
[Sun Jul 22 07:19:02 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 07:19:02 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Sun Jul 22 07:19:02 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.067
[Sun Jul 22 07:19:02 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.35"
[Sun Jul 22 09:08:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src28.ximg exists
[Sun Jul 22 09:08:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src28.csv
[Sun Jul 22 09:08:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Jul 22 09:08:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src28.csv
[Sun Jul 22 09:08:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 09:08:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Jul 22 09:08:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Jul 22 09:08:30 2012] Fit fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Jul 22 09:09:17 2012] Source 61 is offset by 5.364868 and -7.021807 pixels which is larger than
2 X fitted extent = 0.960063 x 0.960063, not incorporating fit results
[Sun Jul 22 09:09:17 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 09:09:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 09:09:17 2012] Assessing source extent using major
[Sun Jul 22 09:09:17 2012] Source does appear to be extended
[Sun Jul 22 09:09:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 14:55:32 2012] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 14:55:32 2012] Initial guess for spatial extent in simple fitting = 8.35"
[Sun Jul 22 14:55:32 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.067
[Sun Jul 22 14:55:32 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.35"
[Sun Jul 22 16:42:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src25.ximg exists
[Sun Jul 22 16:42:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src25.csv
[Sun Jul 22 16:42:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun Jul 22 16:42:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src25.csv
[Sun Jul 22 16:42:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 16:42:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun Jul 22 16:42:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun Jul 22 16:42:30 2012] Fit fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun Jul 22 16:43:05 2012] Source 61 is offset by -3.573913 and 7.012009 pixels which is larger than
2 X fitted extent = 1.850731 x 1.850731, not incorporating fit results
[Sun Jul 22 16:43:05 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:43:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:43:05 2012] Assessing source extent using major
[Sun Jul 22 16:43:05 2012] Source does appear to be extended
[Sun Jul 22 16:43:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 16:18:14 2012] XMMSAS src. selection expression = ellipse(27435.083557, 21556.378754, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 16:18:14 2012] Writing source region out to fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src61_src.reg
[Mon Jul 23 16:18:14 2012] Extracting stamp from image fullrun_mos2_xmm0551280201_pi300-10000_cl_sm2.00.img.gz, (278, 211) - (353, 286)
[Mon Jul 23 16:18:14 2012] XMMSAS bgd. selection expression = annulus(27435.083557, 21556.378754, 1087.500000, 2175.000000, X, Y) && !ellipse(26015.172240, 23843.056600, 5908.056170, 5908.056170, 0.000000, X, Y) && !ellipse(25094.303528, 23074.083771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.134552, 23596.548401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.303925, 24528.192871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25065.031830, 21362.306732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.002655, 23476.002106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28163.583771, 24059.513824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26519.547150, 20078.492538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25787.321930, 20221.330460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.804000, 20771.816000, 1337.368038, 1337.368038, 0.000000, X, Y)
[Mon Jul 23 16:18:14 2012] Writing fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src61.gif
[Mon Jul 23 16:32:48 2012] Mean detx,y = (560.91, 2869.05) 
[Mon Jul 23 16:32:49 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 16:33:03 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 16:33:03 2012] Setting source spectrum file to fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Mon Jul 23 16:33:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Mon Jul 23 20:49:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 20:49:11 2012] rmf not generated due to insufficient counts
[Mon Jul 23 21:04:16 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:04:16 2012] Error reading totcts from fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Mon Jul 23 21:04:17 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:04:17 2012] Using photon index=1.80, rate=0.00309, arf fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src61.arf
[Mon Jul 23 21:04:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:04:17 2012] Updating source flux to 3.6e-14
[Mon Jul 23 21:06:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting