[Sat Jul 21 23:54:10 2012] Detection parameters:
  Position = (223.0, 244.7) = 11 55 42.23 23 22 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 446.9 +/- 27.6
  Background counts = 70.2
  Rate = 0.01 +/- 0.0006

[Sat Jul 21 23:54:12 2012] Off-axis axis estimate = 6.72'
[Sun Jul 22 07:19:02 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 07:19:02 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Sun Jul 22 07:19:02 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.827
[Sun Jul 22 07:19:02 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.79"
[Sun Jul 22 09:08:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src11.ximg exists
[Sun Jul 22 09:08:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src11.csv
[Sun Jul 22 09:08:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Jul 22 09:08:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src11.csv
[Sun Jul 22 09:08:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 09:08:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Jul 22 09:08:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jul 22 09:08:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Jul 22 09:08:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sun Jul 22 09:08:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 09:09:17 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 12.502052 pixels away
[Sun Jul 22 09:09:17 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 09:09:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 09:09:17 2012] Assessing source extent using major
[Sun Jul 22 09:09:17 2012] Source does appear to be extended
[Sun Jul 22 09:09:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 14:55:32 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 14:55:32 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Sun Jul 22 14:55:32 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.827
[Sun Jul 22 14:55:32 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.79"
[Sun Jul 22 16:42:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src10.ximg exists
[Sun Jul 22 16:42:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Jul 22 16:42:29 2012] Fit fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src10 appears to have run properly
[Sun Jul 22 16:42:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Jul 22 16:42:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jul 22 16:42:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Jul 22 16:42:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sun Jul 22 16:42:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 16:43:05 2012] Source 21 is offset by -6.930786 and 4.950394 pixels which is larger than
2 X fitted extent = 0.861457 x 0.861457, not incorporating fit results
[Sun Jul 22 16:43:05 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:43:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:43:05 2012] Assessing source extent using major
[Sun Jul 22 16:43:05 2012] Source does appear to be extended
[Sun Jul 22 16:43:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 16:18:14 2012] XMMSAS src. selection expression = ellipse(19349.097580, 21244.224304, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 16:18:14 2012] Writing source region out to fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src21_src.reg
[Mon Jul 23 16:18:14 2012] Extracting stamp from image fullrun_mos2_xmm0551280201_pi300-10000_cl_sm2.00.img.gz, (185, 207) - (260, 282)
[Mon Jul 23 16:18:14 2012] XMMSAS bgd. selection expression = annulus(19349.097580, 21244.224304, 1087.500000, 2175.000000, X, Y) && !ellipse(26015.172240, 23843.056600, 5908.056170, 5908.056170, 0.000000, X, Y) && !ellipse(17121.720490, 23454.979584, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 16:18:14 2012] Writing fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src21.gif
[Mon Jul 23 16:28:16 2012] Mean detx,y = (-6777.84, -403.65) 
[Mon Jul 23 16:28:17 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 16:28:48 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 16:28:48 2012] Setting source spectrum file to fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jul 23 16:28:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Jul 23 20:28:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 20:28:51 2012] rmf not generated due to insufficient counts
[Mon Jul 23 21:04:15 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:04:15 2012] Error reading totcts from fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jul 23 21:04:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:04:16 2012] Using photon index=1.80, rate=0.01, arf fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src21.arf
[Mon Jul 23 21:04:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:04:16 2012] Updating source flux to 1.6e-13
[Mon Jul 23 21:06:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting