[Sat Jul 21 23:54:10 2012] Detection parameters:
  Position = (289.0, 265.8) = 11 55 21.37 23 23 39.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1186.9 +/- 47.7
  Background counts = 236.8
  Rate = 0.02 +/- 0.0009

[Sat Jul 21 23:54:12 2012] Off-axis axis estimate = 2.46'
[Sun Jul 22 07:19:02 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 07:19:02 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Sun Jul 22 07:19:02 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.733
[Sun Jul 22 07:19:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.66"
[Sun Jul 22 09:08:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jul 22 09:08:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src3.csv
[Sun Jul 22 09:08:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jul 22 09:08:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src3.csv
[Sun Jul 22 09:08:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 09:08:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jul 22 09:08:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul 22 09:08:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jul 22 09:08:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul 22 09:08:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 09:09:17 2012] Source 19 is offset by 6.889420 and 4.695992 pixels which is larger than
2 X fitted extent = 6.768744 x 5.998911, not incorporating fit results
[Sun Jul 22 09:09:17 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 09:09:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 09:09:17 2012] Assessing source extent using major
[Sun Jul 22 09:09:17 2012] Source does appear to be extended
[Sun Jul 22 09:09:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 09:09:17 2012] Source is confused with source 17
[Sun Jul 22 14:55:32 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 14:55:32 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Sun Jul 22 14:55:32 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.733
[Sun Jul 22 14:55:32 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.66"
[Sun Jul 22 16:42:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jul 22 16:42:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src3.csv
[Sun Jul 22 16:42:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jul 22 16:42:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src3.csv
[Sun Jul 22 16:42:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 16:42:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jul 22 16:42:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jul 22 16:42:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jul 22 16:42:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jul 22 16:42:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 16:43:05 2012] Warning, spatial fit 3 centroid is now closest to src. 17
[Sun Jul 22 16:43:05 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:43:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:43:05 2012] Assessing source extent using major
[Sun Jul 22 16:43:05 2012] Source does appear to be extended
[Sun Jul 22 16:43:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 16:18:13 2012] Counts = 1186.879272, rescaling region sizes by 2.000000
[Mon Jul 23 16:18:13 2012] XMMSAS src. selection expression = ellipse(25094.303528, 23074.083771, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jul 23 16:18:13 2012] Writing source region out to fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src19_src.reg
[Mon Jul 23 16:18:13 2012] Extracting stamp from image fullrun_mos2_xmm0551280201_pi300-10000_cl_sm2.00.img.gz, (214, 191) - (364, 341)
[Mon Jul 23 16:18:13 2012] XMMSAS bgd. selection expression = annulus(25094.303528, 23074.083771, 4350.000000, 8700.000000, X, Y) && !ellipse(26015.172240, 23843.056600, 5908.056170, 5908.056170, 0.000000, X, Y) && !ellipse(22006.348000, 18317.119600, 396.268811, 396.268811, 0.000000, X, Y) && !ellipse(24834.134552, 23596.548401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33909.441528, 19854.690826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17121.720490, 23454.979584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18134.130601, 24462.291070, 365.688263, 306.960050, 108.226273, X, Y) && !ellipse(27435.303925, 24528.192871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19349.097580, 21244.224304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21098.688300, 27604.328200, 416.393612, 338.280810, 114.401000, X, Y) && !ellipse(26068.914000, 28656.561000, 374.438411, 374.438411, 0.000000, X, Y) && !ellipse(34625.006439, 29896.757690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33771.417175, 18031.545929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24073.673096, 25326.066345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25065.031830, 21362.306732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.002655, 23476.002106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.083557, 21556.378754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29395.540000, 29437.588600, 520.996815, 520.996815, 0.000000, X, Y) && !ellipse(22806.763000, 25789.612600, 407.612366, 407.612366, 0.000000, X, Y) && !ellipse(26696.220764, 15274.113480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33704.608673, 23620.419769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23897.968567, 21978.529739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15745.014786, 13606.727203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28163.583771, 24059.513824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28000.416290, 25976.474182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26519.547150, 20078.492538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25787.321930, 20221.330460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27160.755310, 27251.111267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.804000, 20771.816000, 1337.368038, 1337.368038, 0.000000, X, Y) && !ellipse(23540.883057, 24580.204895, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 16:18:13 2012] Writing fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src19.gif
[Mon Jul 23 16:21:30 2012] Mean detx,y = (-319.30, 480.15) 
[Mon Jul 23 16:21:33 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 16:25:35 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 16:25:35 2012] Setting source spectrum file to fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jul 23 16:25:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Jul 23 20:22:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 20:22:51 2012] rmf not generated due to insufficient counts
[Mon Jul 23 21:04:15 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:04:15 2012] Error reading totcts from fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jul 23 21:04:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:04:16 2012] Using photon index=1.80, rate=0.0215, arf fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src19.arf
[Mon Jul 23 21:04:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:04:16 2012] Updating source flux to 2e-13
[Mon Jul 23 21:06:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting