[Sat Jul 21 23:54:10 2012] Detection parameters:
  Position = (299.9, 275.9) = 11 55 17.92 23 24 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10929.6 +/- 130.7
  Background counts = 263.1
  Rate = 0.2 +/- 0.002

[Sat Jul 21 23:54:12 2012] Off-axis axis estimate = 1.64'
[Sun Jul 22 07:19:02 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 07:19:02 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sun Jul 22 07:19:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Sun Jul 22 07:19:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sun Jul 22 09:08:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 22 09:08:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 09:08:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 22 09:08:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 09:08:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 09:08:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 22 09:08:30 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 22 09:08:30 2012] Fit fullrun_mos2_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 22 09:09:17 2012] Spatial fit model total counts = 30901.300000, observed total counts = 30840.000000
[Sun Jul 22 09:09:17 2012] Offset between fit and detection position for source 1 = 0.921333 pixels
[Sun Jul 22 09:09:17 2012] 30907.500000 total counts/ 19881.500000 bgd. counts: snr = 78.197598
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.921333 pixels
  Position = (299.8, 275.0) = 11 55 17.96 23 24 17.4
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 11026.0 +/- 175.8
  Background counts = 19881.5
  Rate = 0.2 +/- 0.003
[Sun Jul 22 09:09:17 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 09:09:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 09:09:17 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 09:09:17 2012] Source does appear to be extended
[Sun Jul 22 09:09:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 14:55:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 22 14:55:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 14:55:32 2012] Initial guess for spatial extent in simple fitting = 14.49"
[Sun Jul 22 14:55:32 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.090
[Sun Jul 22 14:55:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.49"
[Sun Jul 22 16:42:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 22 16:42:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 16:42:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 22 16:42:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 16:42:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 16:42:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 22 16:42:29 2012] fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 22 16:42:30 2012] Fit fullrun_mos2_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 22 16:43:05 2012] Spatial fit model total counts = 55518.100000, observed total counts = 53717.000000
[Sun Jul 22 16:43:05 2012] Offset between fit and detection position for source 1 = 0.442217 pixels
[Sun Jul 22 16:43:05 2012] 55677.600000 total counts/ 24068.500000 bgd. counts: snr = 203.745309
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.442217 pixels
  Position = (299.6, 274.6) = 11 55 18.03 23 24 15.7
  Extent = 24.6 (24.0-25.0)", rotation angle = 0
  Source counts = 31609.1 +/- 236.0
  Background counts = 24068.5
  Rate = 0.5 +/- 0.004
[Sun Jul 22 16:43:05 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:43:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:43:05 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 16:43:05 2012] Source does appear to be extended
[Sun Jul 22 16:43:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 16:43:05 2012] Source is confused with source 19
[Sun Jul 22 16:43:05 2012] Source is confused with source 17
[Mon Jul 23 16:18:13 2012] Counts = 31609.100000, rescaling region sizes by 3.000000
[Mon Jul 23 16:18:13 2012] XMMSAS src. selection expression = ellipse(26015.172240, 23843.056600, 4431.042128, 4431.042128, 0.000000, X, Y)
[Mon Jul 23 16:18:13 2012] Writing source region out to fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 23 16:18:13 2012] Extracting stamp from image fullrun_mos2_xmm0551280201_pi300-10000_cl_sm2.00.img.gz, (45, 20) - (554, 529)
[Mon Jul 23 16:18:13 2012] XMMSAS bgd. selection expression = annulus(26015.172240, 23843.056600, 22155.210638, 44310.421275, X, Y) && !ellipse(22006.348000, 18317.119600, 396.268811, 396.268811, 0.000000, X, Y) && !ellipse(25094.303528, 23074.083771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.134552, 23596.548401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33909.441528, 19854.690826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17121.720490, 23454.979584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18134.130601, 24462.291070, 365.688263, 306.960050, 108.226273, X, Y) && !ellipse(27435.303925, 24528.192871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33413.259033, 36635.312317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19349.097580, 21244.224304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12558.819000, 32033.331400, 556.583216, 388.983211, 86.597300, X, Y) && !ellipse(21098.688300, 27604.328200, 416.393612, 338.280810, 114.401000, X, Y) && !ellipse(29823.394200, 32318.152800, 481.012014, 481.012014, 0.000000, X, Y) && !ellipse(26068.914000, 28656.561000, 374.438411, 374.438411, 0.000000, X, Y) && !ellipse(34419.893200, 26218.162000, 472.666414, 472.666414, 0.000000, X, Y) && !ellipse(14386.441605, 21087.439514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25281.891968, 34549.699188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34625.006439, 29896.757690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33771.417175, 18031.545929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24073.673096, 25326.066345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25065.031830, 21362.306732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15246.149384, 26634.499298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.002655, 23476.002106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.083557, 21556.378754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29395.540000, 29437.588600, 520.996815, 520.996815, 0.000000, X, Y) && !ellipse(22806.763000, 25789.612600, 407.612366, 407.612366, 0.000000, X, Y) && !ellipse(20491.518188, 35801.776489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26696.220764, 15274.113480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33704.608673, 23620.419769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23897.968567, 21978.529739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15745.014786, 13606.727203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37825.354858, 30846.756378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28163.583771, 24059.513824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28000.416290, 25976.474182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26519.547150, 20078.492538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39087.946075, 15642.810760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36547.791931, 17159.206848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25787.321930, 20221.330460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26363.269470, 37820.190826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27160.755310, 27251.111267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30818.753784, 34855.577148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24703.804000, 20771.816000, 1337.368038, 1337.368038, 0.000000, X, Y) && !ellipse(23540.883057, 24580.204895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29710.958740, 36417.350342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12044.064575, 14039.615128, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 16:18:13 2012] Writing fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src1.gif
[Mon Jul 23 16:18:26 2012] Mean detx,y = (370.19, 151.59) 
[Mon Jul 23 16:18:28 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 16:20:34 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 16:20:35 2012] Setting source spectrum file to fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 16:20:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 23 21:04:15 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:04:15 2012] Error reading totcts from fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 21:04:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:04:16 2012] Using photon index=1.80, rate=0.537, arf fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 21:04:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:04:16 2012] Updating source flux to 4.4e-12
[Mon Jul 23 21:06:40 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Jul 23 21:07:55 2012] Reading fit data from xmm0551280201/analysis//spectral/fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 23 21:07:55 2012] Spectral fit parameter nH value = 3.82263e+20
[Mon Jul 23 21:07:55 2012] Spectral fit parameter PhoIndex value = 1.6082
[Mon Jul 23 21:07:55 2012] Failed to get F(0.3-8.0) from xmm0551280201/analysis//spectral/fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 23 21:07:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:07:55 2012] Using Nh = 3.8e+20, photon index=1.61, rate=0.537, arf fullrun_mos2_xmm0551280201_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 21:07:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:07:55 2012] Updating source flux to 5.1e-12