[Sat Jul 21 23:53:34 2012] Detection parameters:
  Position = (391.8, 238.6) = 11 54 48.90 23 21 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.6 +/- 12.7
  Background counts = 45.6
  Rate = 0.001 +/- 0.0002

[Sat Jul 21 23:53:34 2012] Off-axis axis estimate = 8.04'
[Sun Jul 22 03:24:47 2012] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 03:24:47 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Sun Jul 22 03:24:47 2012] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.831
[Sun Jul 22 03:24:47 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 10.45"
[Sun Jul 22 07:19:00 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src73.ximg exists
[Sun Jul 22 07:19:00 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src73_1.ximg exists
[Sun Jul 22 07:19:00 2012] Fit fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src73 appears to have run properly
[Sun Jul 22 07:19:02 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Sun Jul 22 07:19:02 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Sun Jul 22 07:19:02 2012] Fit fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Sun Jul 22 09:09:04 2012] Spatial fit model total counts = 547.091000, observed total counts = 522.000000
[Sun Jul 22 09:09:04 2012] Offset between fit and detection position for source 72 = 9.873605 pixels
[Sun Jul 22 09:09:04 2012] 481.883000 total counts/ 287.015000 bgd. counts: snr = 11.502394
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 9.873605 pixels
  Position = (389.1, 248.1) = 11 54 49.75 23 22 20.1
  Extent = 20.9" x 20.9", rotation angle = 0
  Source counts = 194.9 +/- 22.0
  Background counts = 287.0
  Rate = 0.003 +/- 0.0004
[Sun Jul 22 09:09:04 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 09:09:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 09:09:04 2012] Assessing source extent using major
[Sun Jul 22 09:09:04 2012] Source does appear to be extended
[Sun Jul 22 09:09:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 12:32:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 22 12:32:43 2012] Initial guess for spatial extent in simple fitting = 20.93"
[Sun Jul 22 12:32:43 2012] source mask rpix=4.8, npix_max = 112, mask sum = 66, frac = 0.585
[Sun Jul 22 12:32:43 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 20.93"
[Sun Jul 22 14:55:31 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src53.ximg exists
[Sun Jul 22 14:55:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src53.csv
[Sun Jul 22 14:55:31 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src53_1.ximg exists
[Sun Jul 22 14:55:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src53.csv
[Sun Jul 22 14:55:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 14:55:32 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sun Jul 22 14:55:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sun Jul 22 14:55:32 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sun Jul 22 14:55:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src53.csv
[Sun Jul 22 14:55:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 16:42:56 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 13.785009 pixels away
[Sun Jul 22 16:42:56 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:42:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:42:56 2012] Assessing source extent using major
[Sun Jul 22 16:42:56 2012] Source does appear to be extended
[Sun Jul 22 16:42:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 09:53:36 2012] XMMSAS src. selection expression = ellipse(33803.768200, 21535.166000, 1255.686036, 1255.686036, 0.000000, X, Y)
[Mon Jul 23 09:53:36 2012] Writing source region out to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src72_src.reg
[Mon Jul 23 09:53:36 2012] Extracting stamp from image fullrun_mos1_xmm0551280201_pi300-10000_cl_sm2.00.img.gz, (317, 176) - (461, 320)
[Mon Jul 23 09:53:36 2012] XMMSAS bgd. selection expression = annulus(33803.768200, 21535.166000, 2092.810060, 4185.620120, X, Y) && !ellipse(26021.866580, 23834.862400, 5723.328165, 5723.328165, 0.000000, X, Y) && !ellipse(33859.586200, 19891.248400, 533.696815, 533.696815, 0.000000, X, Y) && !ellipse(33752.704529, 18039.379593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33652.055023, 23627.322845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34718.848000, 25140.582200, 1256.056036, 1256.056036, 0.000000, X, Y) && !ellipse(36505.114990, 17029.876389, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 09:53:36 2012] Writing fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src72.gif
[Mon Jul 23 10:22:58 2012] Mean detx,y = (6127.60, -6309.23) 
[Mon Jul 23 10:23:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 10:24:08 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 10:24:08 2012] Setting source spectrum file to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Mon Jul 23 10:24:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Mon Jul 23 21:04:14 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:04:14 2012] Error reading totcts from fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Mon Jul 23 21:04:15 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:04:15 2012] Using photon index=1.80, rate=0.00333, arf fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src72.arf
[Mon Jul 23 21:04:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:04:15 2012] Updating source flux to 6.8e-14