[Sat Jul 21 23:53:34 2012] Detection parameters:
  Position = (226.3, 280.1) = 11 55 41.19 23 24 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.5 +/- 20.5
  Background counts = 86.5
  Rate = 0.003 +/- 0.0004

[Sat Jul 21 23:53:34 2012] Off-axis axis estimate = 5.40'
[Sun Jul 22 03:24:47 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 03:24:47 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Sun Jul 22 03:24:47 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.111
[Sun Jul 22 03:24:47 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.13"
[Sun Jul 22 07:18:59 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src27.ximg exists
[Sun Jul 22 07:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src27.csv
[Sun Jul 22 07:18:59 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun Jul 22 07:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src27.csv
[Sun Jul 22 07:18:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 07:19:01 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun Jul 22 07:19:01 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Jul 22 07:19:01 2012] Fit fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun Jul 22 09:09:04 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 12.367795 pixels away
[Sun Jul 22 09:09:04 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 09:09:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 09:09:04 2012] Assessing source extent using major
[Sun Jul 22 09:09:04 2012] Source does appear to be extended
[Sun Jul 22 09:09:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 12:32:43 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 12:32:43 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Sun Jul 22 12:32:43 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.111
[Sun Jul 22 12:32:43 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 9.13"
[Sun Jul 22 14:55:31 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src26.ximg exists
[Sun Jul 22 14:55:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src26.csv
[Sun Jul 22 14:55:31 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Jul 22 14:55:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src26.csv
[Sun Jul 22 14:55:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 14:55:31 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Jul 22 14:55:31 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Jul 22 14:55:31 2012] Fit fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sun Jul 22 16:42:56 2012] Spatial fit model total counts = 560.745000, observed total counts = 562.000000
[Sun Jul 22 16:42:56 2012] Offset between fit and detection position for source 50 = 0.015851 pixels
[Sun Jul 22 16:42:56 2012] 568.209300 total counts/ 477.689000 bgd. counts: snr = 4.141650
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 0.015851 pixels
  Position = (226.3, 280.0) = 11 55 41.19 23 24 39.2
  Extent = 4.4 (3.6-5.8)", rotation angle = 0
  Source counts = 90.5 +/- 23.8
  Background counts = 477.7
  Rate = 0.002 +/- 0.0004
[Sun Jul 22 16:42:56 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:42:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:42:56 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 16:42:56 2012] Source does appear to be extended
[Sun Jul 22 16:42:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 09:53:35 2012] XMMSAS src. selection expression = ellipse(19637.304000, 24315.291000, 265.332608, 265.332608, 0.000000, X, Y)
[Mon Jul 23 09:53:35 2012] Writing source region out to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src50_src.reg
[Mon Jul 23 09:53:35 2012] Extracting stamp from image fullrun_mos1_xmm0551280201_pi300-10000_cl_sm2.00.img.gz, (211, 265) - (242, 295)
[Mon Jul 23 09:53:35 2012] XMMSAS bgd. selection expression = annulus(19637.304000, 24315.291000, 442.221013, 884.442025, X, Y) && !ellipse(26021.866580, 23834.862400, 5723.328165, 5723.328165, 0.000000, X, Y) && !ellipse(18139.987946, 24504.433014, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 09:53:35 2012] Writing fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src50.gif
[Mon Jul 23 10:09:55 2012] Mean detx,y = (-2809.60, 4964.25) 
[Mon Jul 23 10:09:57 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 10:10:15 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 10:10:15 2012] Setting source spectrum file to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jul 23 10:10:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Mon Jul 23 15:24:32 2012] Not generating rmf since there are only 90 counts
[Mon Jul 23 15:24:32 2012] rmf not generated due to insufficient counts
[Mon Jul 23 21:04:13 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:04:13 2012] Error reading totcts from fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jul 23 21:04:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:04:14 2012] Using photon index=1.80, rate=0.00155, arf fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src50.arf
[Mon Jul 23 21:04:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:04:14 2012] Updating source flux to 2.4e-14
[Mon Jul 23 21:04:19 2012] Source 50 has fewer than 100.000000 counts, skipping spectral fitting