[Sat Jul 21 23:53:33 2012] Detection parameters:
  Position = (253.4, 211.1) = 11 55 32.60 23 19 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1356.4 +/- 44.2
  Background counts = 93.3
  Rate = 0.03 +/- 0.0009

[Sat Jul 21 23:53:34 2012] Off-axis axis estimate = 7.12'
[Sun Jul 22 03:24:47 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 03:24:47 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Sun Jul 22 03:24:47 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.767
[Sun Jul 22 03:24:47 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.99"
[Sun Jul 22 07:18:59 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jul 22 07:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src3.csv
[Sun Jul 22 07:18:59 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jul 22 07:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src3.csv
[Sun Jul 22 07:18:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 07:19:00 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jul 22 07:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul 22 07:19:00 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jul 22 07:19:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jul 22 07:19:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 09:09:04 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 12.060464 pixels away
[Sun Jul 22 09:09:04 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 09:09:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 09:09:04 2012] Assessing source extent using major
[Sun Jul 22 09:09:04 2012] Source does appear to be extended
[Sun Jul 22 09:09:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 12:32:43 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 12:32:43 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Sun Jul 22 12:32:43 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.767
[Sun Jul 22 12:32:43 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.99"
[Sun Jul 22 14:55:30 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jul 22 14:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src3.csv
[Sun Jul 22 14:55:30 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jul 22 14:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src3.csv
[Sun Jul 22 14:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 14:55:31 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jul 22 14:55:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jul 22 14:55:31 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jul 22 14:55:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Jul 22 14:55:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 16:42:56 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 12.060464 pixels away
[Sun Jul 22 16:42:56 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:42:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:42:56 2012] Assessing source extent using major
[Sun Jul 22 16:42:56 2012] Source does appear to be extended
[Sun Jul 22 16:42:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 09:53:35 2012] Counts = 1356.410645, rescaling region sizes by 2.000000
[Mon Jul 23 09:53:35 2012] XMMSAS src. selection expression = ellipse(22001.409454, 18319.582092, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jul 23 09:53:35 2012] Writing source region out to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src19_src.reg
[Mon Jul 23 09:53:35 2012] Extracting stamp from image fullrun_mos1_xmm0551280201_pi300-10000_cl_sm2.00.img.gz, (178, 136) - (328, 286)
[Mon Jul 23 09:53:35 2012] XMMSAS bgd. selection expression = annulus(22001.409454, 18319.582092, 4350.000000, 8700.000000, X, Y) && !ellipse(26021.866580, 23834.862400, 5723.328165, 5723.328165, 0.000000, X, Y) && !ellipse(17116.171000, 23483.727800, 353.852010, 353.852010, 0.000000, X, Y) && !ellipse(26027.556946, 21855.904556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.026000, 24128.958000, 1171.048034, 1171.048034, 0.000000, X, Y) && !ellipse(26691.308000, 22177.860000, 634.018418, 634.018418, 0.000000, X, Y) && !ellipse(27668.333191, 22796.293365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21111.641434, 27592.200226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18139.987946, 24504.433014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26117.772000, 26090.702000, 2163.472062, 2163.472062, 0.000000, X, Y) && !ellipse(25441.886688, 21102.558578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19329.555237, 21182.994019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26000.234039, 26729.031616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15266.443100, 26512.184753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14399.792419, 21067.448471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.422241, 21624.443085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19637.304000, 24315.291000, 353.776810, 353.776810, 0.000000, X, Y) && !ellipse(22810.856201, 25744.490997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23821.949768, 21420.264694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15636.586044, 23935.311554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26509.762200, 27114.370000, 1081.736031, 1081.736031, 0.000000, X, Y) && !ellipse(15756.873474, 13596.736328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25457.049561, 20160.915268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.586000, 27167.248000, 2265.008065, 2265.008065, 0.000000, X, Y) && !ellipse(26731.584200, 15300.030000, 1777.104051, 1777.104051, 0.000000, X, Y) && !ellipse(22927.257996, 22579.271271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24806.158000, 20623.332000, 1350.984039, 1350.984039, 0.000000, X, Y) && !ellipse(26033.960876, 27492.020660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13762.615921, 17291.970261, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 09:53:35 2012] Writing fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src19.gif
[Mon Jul 23 09:55:53 2012] Mean detx,y = (3590.37, 5474.99) 
[Mon Jul 23 09:55:54 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 09:57:30 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 09:57:30 2012] Setting source spectrum file to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jul 23 09:57:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Mon Jul 23 14:38:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 14:38:07 2012] rmf not generated due to insufficient counts
[Mon Jul 23 21:04:13 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:04:13 2012] Error reading totcts from fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Mon Jul 23 21:04:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:04:14 2012] Using photon index=1.80, rate=0.0285, arf fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src19.arf
[Mon Jul 23 21:04:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:04:14 2012] Updating source flux to 3.2e-13
[Mon Jul 23 21:04:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting