[Sat Jul 21 23:53:33 2012] Detection parameters:
  Position = (166.1, 242.7) = 11 56 0.20 23 21 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 254.4 +/- 21.4
  Background counts = 63.4
  Rate = 0.004 +/- 0.0003

[Sat Jul 21 23:53:34 2012] Off-axis axis estimate = 10.41'
[Sun Jul 22 03:24:47 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 03:24:47 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Sun Jul 22 03:24:47 2012] source mask rpix=2.7, npix_max = 40, mask sum = 33, frac = 0.819
[Sun Jul 22 03:24:47 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 11.63"
[Sun Jul 22 07:18:59 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jul 22 07:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src23.csv
[Sun Jul 22 07:18:59 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jul 22 07:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src23.csv
[Sun Jul 22 07:18:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 07:19:01 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jul 22 07:19:01 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jul 22 07:19:01 2012] Fit fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun Jul 22 09:09:04 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.913469 pixels away
[Sun Jul 22 09:09:04 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 09:09:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 09:09:04 2012] Assessing source extent using major
[Sun Jul 22 09:09:04 2012] Source does appear to be extended
[Sun Jul 22 09:09:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 12:32:43 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 12:32:43 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Sun Jul 22 12:32:43 2012] source mask rpix=2.7, npix_max = 40, mask sum = 33, frac = 0.819
[Sun Jul 22 12:32:43 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 11.63"
[Sun Jul 22 14:55:30 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src22.ximg exists
[Sun Jul 22 14:55:30 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Jul 22 14:55:30 2012] Fit fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src22 appears to have run properly
[Sun Jul 22 14:55:31 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Jul 22 14:55:31 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Jul 22 14:55:31 2012] Fit fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sun Jul 22 16:42:56 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 15.284595 pixels away
[Sun Jul 22 16:42:56 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:42:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:42:56 2012] Assessing source extent using major
[Sun Jul 22 16:42:56 2012] Source does appear to be extended
[Sun Jul 22 16:42:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 09:53:35 2012] XMMSAS src. selection expression = ellipse(14399.792419, 21067.448471, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 09:53:35 2012] Writing source region out to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src16_src.reg
[Mon Jul 23 09:53:35 2012] Extracting stamp from image fullrun_mos1_xmm0551280201_pi300-10000_cl_sm2.00.img.gz, (129, 205) - (204, 280)
[Mon Jul 23 09:53:35 2012] XMMSAS bgd. selection expression = annulus(14399.792419, 21067.448471, 1087.500000, 2175.000000, X, Y) && !ellipse(15636.586044, 23935.311554, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 09:53:35 2012] Writing fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src16.gif
[Mon Jul 23 10:07:30 2012] Mean detx,y = (-2267.33, 11099.87) 
[Mon Jul 23 10:07:33 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 10:07:47 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 10:07:48 2012] Setting source spectrum file to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Jul 23 10:07:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Jul 23 15:23:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 15:23:59 2012] rmf not generated due to insufficient counts
[Mon Jul 23 21:04:13 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:04:13 2012] Error reading totcts from fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Jul 23 21:04:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:04:14 2012] Using photon index=1.80, rate=0.00394, arf fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src16.arf
[Mon Jul 23 21:04:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:04:14 2012] Updating source flux to 6.9e-14
[Mon Jul 23 21:04:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting