[Sat Jul 21 23:53:32 2012] Detection parameters:
  Position = (299.9, 275.0) = 11 55 17.92 23 24 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11206.7 +/- 132.3
  Background counts = 273.7
  Rate = 0.2 +/- 0.002

[Sat Jul 21 23:53:34 2012] Off-axis axis estimate = 1.70'
[Sun Jul 22 03:24:47 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 03:24:47 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sun Jul 22 03:24:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sun Jul 22 03:24:47 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sun Jul 22 07:18:59 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 22 07:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 07:18:59 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 22 07:18:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src1.csv
[Sun Jul 22 07:18:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 07:19:00 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 22 07:19:00 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 22 07:19:00 2012] Fit fullrun_mos1_xmm0551280201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 22 09:09:04 2012] Spatial fit model total counts = 30980.900000, observed total counts = 30981.000000
[Sun Jul 22 09:09:04 2012] Offset between fit and detection position for source 1 = 0.201608 pixels
[Sun Jul 22 09:09:04 2012] 30949.000000 total counts/ 19459.000000 bgd. counts: snr = 82.368237
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.201608 pixels
  Position = (299.8, 274.9) = 11 55 17.97 23 24 17.0
  Extent = 14.6 (14.5-29.1)", rotation angle = 0
  Source counts = 11490.0 +/- 175.9
  Background counts = 19459.0
  Rate = 0.2 +/- 0.003
[Sun Jul 22 09:09:04 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 09:09:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 09:09:04 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 09:09:04 2012] Source does appear to be extended
[Sun Jul 22 09:09:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 12:32:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 22 12:32:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 12:32:43 2012] Initial guess for spatial extent in simple fitting = 14.56"
[Sun Jul 22 12:32:43 2012] source mask rpix=3.3, npix_max = 59, mask sum = 64, frac = 1.081
[Sun Jul 22 12:32:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.56"
[Sun Jul 22 14:55:30 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 22 14:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 14:55:30 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 22 14:55:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 14:55:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 14:55:31 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 22 14:55:31 2012] fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 22 14:55:31 2012] Fit fullrun_mos1_xmm0551280201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 22 16:42:56 2012] Spatial fit model total counts = 55255.900000, observed total counts = 55175.000000
[Sun Jul 22 16:42:56 2012] Offset between fit and detection position for source 1 = 0.417082 pixels
[Sun Jul 22 16:42:56 2012] 55367.200000 total counts/ 25111.100000 bgd. counts: snr = 190.932596
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.417082 pixels
  Position = (299.7, 274.5) = 11 55 18.00 23 24 15.3
  Extent = 23.8 (23.4-24.5)", rotation angle = 0
  Source counts = 30256.1 +/- 235.3
  Background counts = 25111.1
  Rate = 0.5 +/- 0.004
[Sun Jul 22 16:42:56 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:42:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:42:56 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 16:42:56 2012] Source does appear to be extended
[Sun Jul 22 16:42:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 16:42:56 2012] Source is confused with source 10
[Mon Jul 23 09:53:35 2012] Counts = 30256.100000, rescaling region sizes by 3.000000
[Mon Jul 23 09:53:35 2012] XMMSAS src. selection expression = ellipse(26021.866580, 23834.862400, 4292.496124, 4292.496124, 0.000000, X, Y)
[Mon Jul 23 09:53:35 2012] Writing source region out to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 23 09:53:35 2012] Extracting stamp from image fullrun_mos1_xmm0551280201_pi300-10000_cl_sm2.00.img.gz, (53, 28) - (546, 521)
[Mon Jul 23 09:53:35 2012] XMMSAS bgd. selection expression = annulus(26021.866580, 23834.862400, 21462.480618, 42924.961235, X, Y) && !ellipse(33859.586200, 19891.248400, 533.696815, 533.696815, 0.000000, X, Y) && !ellipse(22001.409454, 18319.582092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17116.171000, 23483.727800, 353.852010, 353.852010, 0.000000, X, Y) && !ellipse(26027.556946, 21855.904556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.026000, 24128.958000, 1171.048034, 1171.048034, 0.000000, X, Y) && !ellipse(26691.308000, 22177.860000, 634.018418, 634.018418, 0.000000, X, Y) && !ellipse(33431.544220, 36676.550232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27668.333191, 22796.293365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26087.308200, 28640.280200, 382.264811, 382.264811, 0.000000, X, Y) && !ellipse(29845.563416, 32301.173462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21111.641434, 27592.200226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18139.987946, 24504.433014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26117.772000, 26090.702000, 2163.472062, 2163.472062, 0.000000, X, Y) && !ellipse(12558.505707, 31976.869598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25441.886688, 21102.558578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34618.203400, 29947.569820, 582.128817, 582.128817, 0.000000, X, Y) && !ellipse(19329.555237, 21182.994019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26000.234039, 26729.031616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15266.443100, 26512.184753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14399.792419, 21067.448471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33752.704529, 18039.379593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33652.055023, 23627.322845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.422241, 21624.443085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19637.304000, 24315.291000, 353.776810, 353.776810, 0.000000, X, Y) && !ellipse(22810.856201, 25744.490997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29358.789082, 29427.856000, 478.980814, 348.663210, 350.773055, X, Y) && !ellipse(23821.949768, 21420.264694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15636.586044, 23935.311554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26509.762200, 27114.370000, 1081.736031, 1081.736031, 0.000000, X, Y) && !ellipse(15756.873474, 13596.736328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25457.049561, 20160.915268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26341.341583, 37871.844421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29698.570374, 36447.506165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.586000, 27167.248000, 2265.008065, 2265.008065, 0.000000, X, Y) && !ellipse(37833.755371, 30918.304108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26731.584200, 15300.030000, 1777.104051, 1777.104051, 0.000000, X, Y) && !ellipse(22927.257996, 22579.271271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34718.848000, 25140.582200, 1256.056036, 1256.056036, 0.000000, X, Y) && !ellipse(24806.158000, 20623.332000, 1350.984039, 1350.984039, 0.000000, X, Y) && !ellipse(26033.960876, 27492.020660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36505.114990, 17029.876389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13762.615921, 17291.970261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33803.768200, 21535.166000, 1674.248048, 1674.248048, 0.000000, X, Y)
[Mon Jul 23 09:53:35 2012] Writing fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src1.gif
[Mon Jul 23 09:53:45 2012] Mean detx,y = (393.23, -492.11) 
[Mon Jul 23 09:53:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 09:55:30 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 09:55:30 2012] Setting source spectrum file to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 09:55:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 23 21:04:13 2012] Updating aperture counts using extracted products
[Mon Jul 23 21:04:13 2012] Error reading totcts from fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 21:04:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:04:14 2012] Using photon index=1.80, rate=0.517, arf fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 21:04:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:04:14 2012] Updating source flux to 4.2e-12
[Mon Jul 23 21:04:19 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Jul 23 21:06:40 2012] Reading fit data from xmm0551280201/analysis//spectral/fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 23 21:06:40 2012] Spectral fit parameter nH value = 3.16554e+20
[Mon Jul 23 21:06:40 2012] Spectral fit parameter PhoIndex value = 1.58696
[Mon Jul 23 21:06:40 2012] Failed to get F(0.3-8.0) from xmm0551280201/analysis//spectral/fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 23 21:06:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 21:06:40 2012] Using Nh = 3.2e+20, photon index=1.59, rate=0.517, arf fullrun_mos1_xmm0551280201_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 21:06:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 21:06:40 2012] Updating source flux to 4.9e-12