[Tue Aug 21 11:20:46 2012] Detection parameters:
  Position = (293.3, 256.4) = 11 55 19.80 23 22 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2027.1 +/- 61.9
  Background counts = 372.5
  Rate = 0.05 +/- 0.001

[Tue Aug 21 11:20:54 2012] Off-axis axis estimate = 3.07'
[Tue Aug 21 11:27:19 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 11:27:19 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Tue Aug 21 11:27:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.151
[Tue Aug 21 11:27:19 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.96"
[Tue Aug 21 15:05:57 2012] fullrun_pn_xmm0551280101_pi300-10000_cl_pass0_src16.ximg exists
[Tue Aug 21 15:05:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280101_pi300-10000_cl_pass0_src16.csv
[Tue Aug 21 15:05:57 2012] fullrun_pn_xmm0551280101_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Aug 21 15:05:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280101_pi300-10000_cl_pass0_src16.csv
[Tue Aug 21 15:05:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 15:05:58 2012] fullrun_pn_xmm0551280101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Aug 21 15:05:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Aug 21 15:05:58 2012] fullrun_pn_xmm0551280101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Aug 21 15:05:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Aug 21 15:05:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 17:41:06 2012] Warning, spatial fit 16 centroid is now closest to src. 3
[Tue Aug 21 17:41:06 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 17:41:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 17:41:06 2012] Assessing source extent using major
[Tue Aug 21 17:41:06 2012] Source does appear to be extended
[Tue Aug 21 17:41:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 17:41:06 2012] Source is confused with source 51
[Tue Aug 21 17:41:31 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 17:41:31 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Tue Aug 21 17:41:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.151
[Tue Aug 21 17:41:31 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 7.96"
[Tue Aug 21 20:13:45 2012] fullrun_pn_xmm0551280101_pi300-10000_cl_pass1_src16.ximg exists
[Tue Aug 21 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280101_pi300-10000_cl_pass1_src16.csv
[Tue Aug 21 20:13:46 2012] fullrun_pn_xmm0551280101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Aug 21 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280101_pi300-10000_cl_pass1_src16.csv
[Tue Aug 21 20:13:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 20:13:46 2012] fullrun_pn_xmm0551280101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Aug 21 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Aug 21 20:13:46 2012] fullrun_pn_xmm0551280101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Aug 21 20:13:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0551280101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Aug 21 20:13:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0551280101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0551280101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 22:37:44 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 31.776321 pixels away
[Tue Aug 21 22:37:44 2012] Warning, spatial fit 16 centroid is now closest to src. 51
[Tue Aug 21 22:37:44 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 22:37:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 22:37:44 2012] Assessing source extent using major
[Tue Aug 21 22:37:44 2012] Source does appear to be extended
[Tue Aug 21 22:37:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 22:38:18 2012] Counts = 2027.066406, rescaling region sizes by 2.000000
[Tue Aug 21 22:38:18 2012] XMMSAS src. selection expression = ellipse(25465.327942, 22261.607635, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Aug 21 22:38:18 2012] Writing source region out to fullrun_pn_xmm0551280101_pi300-10000_pass1_cl_src17_src.reg
[Tue Aug 21 22:38:18 2012] Extracting stamp from image fullrun_pn_xmm0551280101_pi300-10000_cl_sm2.00.img.gz, (218, 181) - (368, 331)
[Tue Aug 21 22:38:18 2012] XMMSAS bgd. selection expression = annulus(25465.327942, 22261.607635, 4350.000000, 8700.000000, X, Y) && !ellipse(25934.367280, 23924.812900, 5567.760160, 5567.760160, 0.000000, X, Y) && !ellipse(18046.111420, 24555.125488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26457.824000, 22351.972000, 2609.056075, 2609.056075, 0.000000, X, Y) && !ellipse(33819.388245, 19974.568054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21925.568400, 18394.905600, 438.352813, 438.352813, 0.000000, X, Y) && !ellipse(34334.787400, 26277.801800, 541.502416, 342.408010, 81.268783, X, Y) && !ellipse(34527.519000, 29979.929000, 567.248016, 567.248016, 0.000000, X, Y) && !ellipse(25957.089813, 28780.633820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21003.258920, 27672.031400, 484.369614, 419.360812, 169.151749, X, Y) && !ellipse(24897.362000, 24247.314000, 1171.720034, 1171.720034, 0.000000, X, Y) && !ellipse(17024.223831, 23511.205139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27742.806000, 21282.968000, 1322.088038, 1322.088038, 0.000000, X, Y) && !ellipse(19482.998672, 17798.964035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29277.432281, 29510.336761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27595.569458, 25979.668182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19258.149500, 21346.034000, 457.016013, 457.016013, 0.000000, X, Y) && !ellipse(24705.195709, 19620.571671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26220.662537, 20833.354538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27090.665192, 26755.406677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22737.242200, 25843.203800, 424.907212, 424.907212, 0.000000, X, Y) && !ellipse(27976.818390, 25115.341980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33618.569794, 23683.524506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22113.607010, 22073.111176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25293.524000, 21357.290000, 1379.664040, 1379.664040, 0.000000, X, Y) && !ellipse(26324.429047, 15339.180283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33676.292400, 18122.090400, 496.614414, 496.614414, 0.000000, X, Y) && !ellipse(15915.842026, 29591.328430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25471.885864, 28461.116974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27066.753998, 27269.059265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28356.084015, 26459.450562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28645.575134, 25453.656433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19525.172485, 24378.202301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19007.464340, 22840.998749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28879.023895, 22187.252213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24888.257324, 20150.413300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26185.327000, 19152.470000, 1449.000042, 1449.000042, 0.000000, X, Y) && !ellipse(26366.991821, 19625.245850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26945.926270, 15601.462662, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 21 22:38:18 2012] Writing fullrun_pn_xmm0551280101_pi300-10000_pass1_cl_src17.gif
[Tue Aug 21 23:24:06 2012] Mean detx,y = (780.60, -1267.81) 
[Tue Aug 21 23:24:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 21 23:26:19 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 21 23:26:20 2012] Setting source spectrum file to fullrun_pn_xmm0551280101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Aug 21 23:26:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0551280101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Aug 23 12:09:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 23 12:09:02 2012] rmf not generated due to insufficient counts
[Thu Aug 23 13:57:35 2012] Updating aperture counts using extracted products
[Thu Aug 23 13:57:35 2012] Error reading totcts from fullrun_pn_xmm0551280101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Aug 23 13:57:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 23 13:57:37 2012] Using photon index=1.80, rate=0.0475, arf fullrun_pn_xmm0551280101_pi300-10000_pass1_cl_src17.arf
[Thu Aug 23 13:57:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 23 13:57:37 2012] Updating source flux to 1.2e-13
[Thu Aug 23 13:57:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting