[Tue Aug 21 11:21:45 2012] Detection parameters:
  Position = (262.1, 297.7) = 11 55 29.65 23 25 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.7 +/- 20.1
  Background counts = 96.4
  Rate = 0.003 +/- 0.0004

[Tue Aug 21 11:21:47 2012] Off-axis axis estimate = 2.63'
[Tue Aug 21 15:05:59 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 15:05:59 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Tue Aug 21 15:05:59 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961
[Tue Aug 21 15:05:59 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.75"
[Tue Aug 21 17:40:42 2012] fullrun_mos1_xmm0551280101_pi300-10000_cl_pass0_src30.ximg exists
[Tue Aug 21 17:40:42 2012] fullrun_mos1_xmm0551280101_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Aug 21 17:40:42 2012] Fit fullrun_mos1_xmm0551280101_pi300-10000_cl_pass0_src30 appears to have run properly
[Tue Aug 21 17:40:43 2012] fullrun_mos1_xmm0551280101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Aug 21 17:40:43 2012] fullrun_mos1_xmm0551280101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Aug 21 17:40:43 2012] Fit fullrun_mos1_xmm0551280101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Tue Aug 21 17:41:18 2012] Source 35 is offset by 7.246084 and -6.694319 pixels which is larger than
2 X fitted extent = 3.126883 x 3.126883, not incorporating fit results
[Tue Aug 21 17:41:18 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 17:41:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 17:41:18 2012] Assessing source extent using major
[Tue Aug 21 17:41:18 2012] Source does appear to be extended
[Tue Aug 21 17:41:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 20:13:47 2012] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 20:13:47 2012] Initial guess for spatial extent in simple fitting = 7.75"
[Tue Aug 21 20:13:47 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961
[Tue Aug 21 20:13:47 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 7.75"
[Tue Aug 21 22:37:25 2012] fullrun_mos1_xmm0551280101_pi300-10000_cl_pass1_src30.ximg exists
[Tue Aug 21 22:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280101_pi300-10000_cl_pass1_src30.csv
[Tue Aug 21 22:37:25 2012] fullrun_mos1_xmm0551280101_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Aug 21 22:37:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551280101_pi300-10000_cl_pass1_src30.csv
[Tue Aug 21 22:37:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551280101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551280101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 22:37:26 2012] fullrun_mos1_xmm0551280101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Aug 21 22:37:26 2012] fullrun_mos1_xmm0551280101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Aug 21 22:37:26 2012] Fit fullrun_mos1_xmm0551280101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Tue Aug 21 22:37:57 2012] Spatial fit model total counts = 21457.600000, observed total counts = 21417.000000
[Tue Aug 21 22:37:57 2012] Offset between fit and detection position for source 35 = 9.550934 pixels
[Tue Aug 21 22:37:57 2012] Warning, changing simple spatial fit ID from 30 to 22
[Tue Aug 21 22:37:57 2012] 19652.870000 total counts/ 17685.100000 bgd. counts: snr = 14.796894
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 9.550934 pixels
  Position = (256.0, 290.4) = 11 55 31.60 23 25 20.6
  Extent = 40.7 (38.2-43.5)", rotation angle = 0
  Source counts = 1967.8 +/- 140.2
  Background counts = 17685.1
  Rate = 0.03 +/- 0.002
[Tue Aug 21 22:37:57 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 22:37:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 22:37:57 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 22:37:57 2012] Source does appear to be extended
[Tue Aug 21 22:37:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 22:37:57 2012] Source is confused with source 37
[Tue Aug 21 22:37:57 2012] Source is confused with source 36
[Thu Aug 23 13:20:12 2012] Counts = 1967.770000, rescaling region sizes by 2.000000
[Thu Aug 23 13:20:12 2012] XMMSAS src. selection expression = ellipse(22219.468000, 25218.266000, 4889.964141, 4889.964141, 0.000000, X, Y)
[Thu Aug 23 13:20:12 2012] Writing source region out to fullrun_mos1_xmm0551280101_pi300-10000_pass1_cl_src35_src.reg
[Thu Aug 23 13:20:12 2012] Extracting stamp from image fullrun_mos1_xmm0551280101_pi300-10000_cl_sm2.00.img.gz, (0, 9) - (537, 571)
[Thu Aug 23 13:20:12 2012] XMMSAS bgd. selection expression = annulus(22219.468000, 25218.266000, 16299.880469, 32599.760938, X, Y) && !ellipse(25935.649200, 23947.959200, 3475.848100, 3475.848100, 0.000000, X, Y) && !ellipse(21908.962662, 18336.701721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33796.698364, 19972.141357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34353.410217, 26293.107666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24716.804000, 24330.152000, 1173.384034, 1173.384034, 0.000000, X, Y) && !ellipse(26255.292000, 21686.542000, 922.432027, 922.432027, 0.000000, X, Y) && !ellipse(17019.697280, 23532.780600, 342.749610, 342.749610, 0.000000, X, Y) && !ellipse(18048.680161, 24586.892914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29727.878400, 32393.392200, 562.475216, 562.475216, 0.000000, X, Y) && !ellipse(25998.216200, 28733.403380, 338.356810, 338.356810, 0.000000, X, Y) && !ellipse(26069.746000, 21802.014000, 1349.816039, 1349.816039, 0.000000, X, Y) && !ellipse(21012.387146, 27688.798157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33347.687775, 36758.840210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24787.830000, 20800.578000, 1349.784039, 1349.784039, 0.000000, X, Y) && !ellipse(23980.486877, 22227.347137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34533.994000, 30033.457000, 581.844017, 581.844017, 0.000000, X, Y) && !ellipse(29252.080400, 29526.212200, 381.979211, 381.979211, 0.000000, X, Y) && !ellipse(26384.477844, 27172.578156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33635.184967, 18114.672241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24032.154000, 24523.048000, 1820.152052, 1820.152052, 0.000000, X, Y) && !ellipse(15191.405334, 26580.533173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.075531, 20930.190094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25363.536774, 20490.623444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14313.004822, 21154.854691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23592.478241, 23186.821625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15737.128000, 23626.680000, 1731.272050, 1731.272050, 0.000000, X, Y) && !ellipse(28109.041504, 25957.849152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23100.952000, 24926.394000, 1203.096035, 1203.096035, 0.000000, X, Y) && !ellipse(15660.442810, 13688.272446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27943.205719, 22145.286819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26217.744659, 37948.611938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27073.009247, 27276.806641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29679.451508, 36499.544739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13713.685059, 17368.388641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26836.564000, 27826.648000, 1118.016032, 1118.016032, 0.000000, X, Y)
[Thu Aug 23 13:20:12 2012] Writing fullrun_mos1_xmm0551280101_pi300-10000_pass1_cl_src35.gif
[Thu Aug 23 13:42:35 2012] Mean detx,y = (-456.20, 187.07) 
[Thu Aug 23 13:42:37 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 13:51:32 2012] grppha failed
[Thu Aug 23 13:51:33 2012] Setting source spectrum file to fullrun_mos1_xmm0551280101_pi300-10000_pass1_cl_src35_src.pi.gz
[Thu Aug 23 13:51:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551280101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu Aug 23 13:57:38 2012] Updating aperture counts using extracted products
[Thu Aug 23 13:57:38 2012] Error reading totcts from fullrun_mos1_xmm0551280101_pi300-10000_pass1_cl_src35_src.pi.gz
[Thu Aug 23 13:57:38 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 13:57:40 2012] Flag b found in src. 35 procflags, skipping spectral fitting
[Thu Aug 23 13:57:40 2012] Flag c found in src. 35 procflags, skipping spectral fitting
[Thu Aug 23 13:57:40 2012] Source 35 has no response, skipping
[Thu Aug 23 13:57:41 2012] xmm0551280101/analysis//spectral/fullrun_mos1_xmm0551280101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete