[Sun May 5 03:10:01 2013] Detection parameters: Position = (143.6, 221.0) = 9 49 49.53 58 18 12.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 79.8 +/- 13.5 Background counts = 17.4 Rate = 0.002 +/- 0.0003 [Sun May 5 03:10:02 2013] Off-axis axis estimate = 12.55' [Sun May 5 03:10:21 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting [Sun May 5 03:10:21 2013] Initial guess for spatial extent in simple fitting = 12.70" [Sun May 5 03:10:21 2013] source mask rpix=2.9, npix_max = 46, mask sum = 37, frac = 0.791 [Sun May 5 03:10:21 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 12.70" [Sun May 5 03:10:21 2013] fullrun_mos2_xmm0551200301_pi300-10000_cl_pass0_src20.ximg exists [Sun May 5 03:10:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551200301_pi300-10000_cl_pass0_src20.csv [Sun May 5 03:10:21 2013] fullrun_mos2_xmm0551200301_pi300-10000_cl_pass0_src20_1.ximg exists [Sun May 5 03:10:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551200301_pi300-10000_cl_pass0_src20.csv [Sun May 5 03:10:21 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0551200301_pi300-10000_cl_pass0_src20_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0551200301_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 03:10:21 2013] fullrun_mos2_xmm0551200301_pi300-10000_cl_pass0_tfrozen_src20.ximg exists [Sun May 5 03:10:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551200301_pi300-10000_cl_pass0_tfrozen_src20.csv [Sun May 5 03:10:21 2013] fullrun_mos2_xmm0551200301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists [Sun May 5 03:10:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551200301_pi300-10000_cl_pass0_tfrozen_src20.csv [Sun May 5 03:10:21 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0551200301_pi300-10000_cl_pass0_tfrozen_src20_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0551200301_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 03:10:32 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.018266 pixels away [Sun May 5 03:10:32 2013] Vigneting correction estimate = 1.000000 [Sun May 5 03:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 03:10:32 2013] Assessing source extent using major [Sun May 5 03:10:32 2013] Source does appear to be extended [Sun May 5 03:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 03:10:42 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting [Sun May 5 03:10:42 2013] Initial guess for spatial extent in simple fitting = 12.70" [Sun May 5 03:10:42 2013] source mask rpix=2.9, npix_max = 46, mask sum = 37, frac = 0.791 [Sun May 5 03:10:42 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 12.70" [Sun May 5 03:10:43 2013] fullrun_mos2_xmm0551200301_pi300-10000_cl_pass1_src19.ximg exists [Sun May 5 03:10:43 2013] fullrun_mos2_xmm0551200301_pi300-10000_cl_pass1_src19_1.ximg exists [Sun May 5 03:10:43 2013] Fit fullrun_mos2_xmm0551200301_pi300-10000_cl_pass1_src19 appears to have run properly [Sun May 5 03:10:43 2013] fullrun_mos2_xmm0551200301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists [Sun May 5 03:10:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551200301_pi300-10000_cl_pass1_tfrozen_src19.csv [Sun May 5 03:10:43 2013] fullrun_mos2_xmm0551200301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists [Sun May 5 03:10:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551200301_pi300-10000_cl_pass1_tfrozen_src19.csv [Sun May 5 03:10:43 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0551200301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0551200301_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 03:10:55 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.226148 pixels away [Sun May 5 03:10:55 2013] Vigneting correction estimate = 1.000000 [Sun May 5 03:10:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 03:10:55 2013] Assessing source extent using major [Sun May 5 03:10:55 2013] Source does appear to be extended [Sun May 5 03:10:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 03:18:09 2013] XMMSAS src. selection expression = ellipse(12446.991821, 19177.880051, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 03:18:09 2013] Not overwriting source region fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_src.reg [Sun May 5 03:18:09 2013] Extracting stamp from image fullrun_mos2_xmm0551200301_pi300-10000_cl_sm2.00.img.gz, (106, 183) - (181, 258) [Sun May 5 03:18:09 2013] XMMSAS bgd. selection expression = annulus(12446.991821, 19177.880051, 1087.500000, 2175.000000, X, Y) [Sun May 5 03:18:09 2013] Writing fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6.gif [Sun May 5 03:18:09 2013] ../../xmm0551200301/products/events/fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0551200301/products/events/fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create [Sun May 5 03:18:09 2013] Mean detx,y = (16068.75, -3841.01) [Sun May 5 03:18:09 2013] ../../xmm0551200301/products/images/fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_src.img and ../../xmm0551200301/products/images/fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create [Sun May 5 03:18:09 2013] ../../xmm0551200301/products/spectra/fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0551200301/products/spectra/fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create [Sun May 5 03:18:09 2013] Setting source spectrum file to fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_src_b10.pi.gz [Sun May 5 03:18:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_bgd.pi.gz [Sun May 5 03:18:09 2013] ../../xmm0551200301/products/lightcurves/fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0551200301/products/lightcurves/fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create [Sun May 5 03:18:12 2013] Not generating rmf since there are only 79 counts [Sun May 5 03:18:12 2013] rmf not generated due to insufficient counts [Sun May 5 03:18:12 2013] fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6.arf exists, delete to re-create [Sun May 5 03:19:02 2013] Updating aperture counts using extracted products [Sun May 5 03:19:02 2013] Total counts from fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 195.00 [Sun May 5 03:19:02 2013] Total counts from fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_bgd.pi.gz = 654.00 [Sun May 5 03:19:02 2013] Got source and background scale factors 1200158.000000, 6357849.000000 [Sun May 5 03:19:02 2013] User source parameters: Position = (143.6, 221.0) = 9 49 49.53 58 18 12.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 71.5 +/- 15.0 Background aperture counts = 123.5 Rate = 0.002 +/- 0.0004 [Sun May 5 03:19:02 2013] Updating counts from extracted products [Sun May 5 03:19:02 2013] Set source signif. to 71.55/11.11 = 6.44 [Sun May 5 03:19:04 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 03:19:04 2013] Using photon index=1.80, rate=0.00184, arf fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6.arf [Sun May 5 03:19:04 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 03:19:04 2013] Updating source flux to 7.3e-14 [Sun May 5 03:19:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 03:19:08 2013] xmm0551200301/analysis//spectral/fullrun_mos2_xmm0551200301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete