[Wed Jun 13 14:04:41 2012] Detection parameters:
  Position = (325.7, 407.0) = 20 3 55.56 -55 34 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1148.4 +/- 43.9
  Background counts = 125.9
  Rate = 0.02 +/- 0.0008

[Wed Jun 13 14:04:42 2012] Off-axis axis estimate = 8.12'
[Wed Jun 13 15:40:18 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 15:40:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 13 15:40:18 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Wed Jun 13 15:40:18 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.062
[Wed Jun 13 15:40:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.49"
[Wed Jun 13 16:18:02 2012] fullrun_mos2_xmm0551150101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 16:18:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551150101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 16:18:02 2012] fullrun_mos2_xmm0551150101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 16:18:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0551150101_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 16:18:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0551150101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0551150101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 16:18:02 2012] fullrun_mos2_xmm0551150101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 16:18:02 2012] fullrun_mos2_xmm0551150101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 16:18:02 2012] Fit fullrun_mos2_xmm0551150101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 13 16:18:20 2012] Spatial fit model total counts = 2073.300000, observed total counts = 2072.000000
[Wed Jun 13 16:18:20 2012] Offset between fit and detection position for source 5 = 0.228743 pixels
[Wed Jun 13 16:18:20 2012] 2016.473000 total counts/ 1381.990000 bgd. counts: snr = 17.067407
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.228743 pixels
  Position = (325.5, 407.1) = 20 3 55.68 -55 34 37.4
  Extent = 5.3 (4.8-5.6)", rotation angle = 0
  Source counts = 634.5 +/- 44.9
  Background counts = 1382.0
  Rate = 0.007 +/- 0.0005
[Wed Jun 13 16:18:20 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 16:18:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 16:18:20 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 16:18:20 2012] Source does appear to be extended
[Wed Jun 13 16:18:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 17:49:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 17:49:22 2012] Initial guess for spatial extent in simple fitting = 5.26"
[Wed Jun 13 17:49:22 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.028
[Wed Jun 13 17:49:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.26"
[Wed Jun 13 18:19:53 2012] fullrun_mos2_xmm0551150101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 18:19:53 2012] fullrun_mos2_xmm0551150101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 18:19:53 2012] Fit fullrun_mos2_xmm0551150101_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jun 13 18:19:53 2012] fullrun_mos2_xmm0551150101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 18:19:53 2012] fullrun_mos2_xmm0551150101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 18:19:53 2012] Fit fullrun_mos2_xmm0551150101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 18:20:14 2012] Spatial fit model total counts = 1706.130000, observed total counts = 1644.000000
[Wed Jun 13 18:20:14 2012] Offset between fit and detection position for source 5 = 0.111145 pixels
[Wed Jun 13 18:20:14 2012] 1649.163000 total counts/ 1029.020000 bgd. counts: snr = 19.332140
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.111145 pixels
  Position = (325.6, 407.1) = 20 3 55.62 -55 34 37.4
  Extent = 6.3" x 3.7", rotation angle = 34
  Source counts = 620.1 +/- 40.6
  Background counts = 1029.0
  Rate = 0.007 +/- 0.0004
[Wed Jun 13 18:20:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:20:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:20:14 2012] Assessing source extent using major
[Wed Jun 13 18:20:14 2012] Source does appear to be extended
[Wed Jun 13 18:20:14 2012] Computing asymmetry using major and minor axis, asym = 1.70
[Wed Jun 13 18:20:14 2012] Source is asymmetric
[Wed Jun 13 20:32:48 2012] XMMSAS src. selection expression = ellipse(28277.581914, 35364.955027, 380.901464, 223.615724, 33.793526, X, Y)
[Wed Jun 13 20:32:48 2012] Writing source region out to fullrun_mos2_xmm0551150101_pi300-10000_pass1_cl_src5_src.reg
[Wed Jun 13 20:32:48 2012] Extracting stamp from image fullrun_mos2_xmm0551150101_pi300-10000_cl_sm2.00.img.gz, (304, 385) - (347, 429)
[Wed Jun 13 20:32:48 2012] XMMSAS bgd. selection expression = annulus(28277.581914, 35364.955027, 634.835774, 1269.671548, X, Y) && !ellipse(27411.635226, 35194.861823, 480.938267, 365.521186, 223.900286, X, Y)
[Wed Jun 13 20:32:48 2012] Writing fullrun_mos2_xmm0551150101_pi300-10000_pass1_cl_src5.gif
[Wed Jun 13 20:32:52 2012] Mean detx,y = (1507.47, -11356.83) 
[Wed Jun 13 20:32:53 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 20:33:01 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 20:33:01 2012] Setting source spectrum file to fullrun_mos2_xmm0551150101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jun 13 20:33:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0551150101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Jun 13 21:21:53 2012] Updating aperture counts using extracted products
[Wed Jun 13 21:21:53 2012] Error reading totcts from fullrun_mos2_xmm0551150101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Jun 13 21:21:53 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 21:21:53 2012] Using photon index=1.80, rate=0.00679, arf fullrun_mos2_xmm0551150101_pi300-10000_pass1_cl_src5.arf
[Wed Jun 13 21:21:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 21:21:53 2012] Updating source flux to 1.9e-13
[Wed Jun 13 21:23:30 2012] Reading fit data from xmm0551150101/analysis//spectral/fullrun_mos2_xmm0551150101_pi300-10000_pass1_cl_src5_pl.csv
[Wed Jun 13 21:23:30 2012] Spectral fit parameter nH value = 1.20271e+21
[Wed Jun 13 21:23:30 2012] Spectral fit parameter PhoIndex value = 2.07852
[Wed Jun 13 21:23:30 2012] Failed to get F(0.3-8.0) from xmm0551150101/analysis//spectral/fullrun_mos2_xmm0551150101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Wed Jun 13 21:23:30 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 21:23:30 2012] Using Nh = 1.2e+21, photon index=2.08, rate=0.00679, arf fullrun_mos2_xmm0551150101_pi300-10000_pass1_cl_src5.arf
[Wed Jun 13 21:23:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 21:23:30 2012] Updating source flux to 1.9e-13