[Wed Jun 13 14:04:18 2012] Detection parameters:
  Position = (372.9, 135.7) = 20 3 31.01 -55 54 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.9 +/- 26.8
  Background counts = 136.5
  Rate = 0.003 +/- 0.0003

[Wed Jun 13 14:04:19 2012] Off-axis axis estimate = 12.98'
[Wed Jun 13 15:14:06 2012] Using EEF radius (= 12.92 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 15:14:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 13 15:14:06 2012] Initial guess for spatial extent in simple fitting = 12.92"
[Wed Jun 13 15:14:06 2012] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.997
[Wed Jun 13 15:14:06 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.92"
[Wed Jun 13 15:40:18 2012] fullrun_mos1_xmm0551150101_pi300-10000_cl_pass0_src10.ximg exists
[Wed Jun 13 15:40:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551150101_pi300-10000_cl_pass0_src10.csv
[Wed Jun 13 15:40:18 2012] fullrun_mos1_xmm0551150101_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Jun 13 15:40:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0551150101_pi300-10000_cl_pass0_src10.csv
[Wed Jun 13 15:40:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0551150101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0551150101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 15:40:18 2012] fullrun_mos1_xmm0551150101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Jun 13 15:40:18 2012] fullrun_mos1_xmm0551150101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Jun 13 15:40:18 2012] Fit fullrun_mos1_xmm0551150101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Jun 13 16:18:15 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.532676 pixels away
[Wed Jun 13 16:18:15 2012] Source 3 is offset by 9.021580 and 0.954060 pixels which is larger than
2 X fitted extent = 1.489402 x 1.489402, not incorporating fit results
[Wed Jun 13 16:18:15 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 16:18:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 16:18:15 2012] Assessing source extent using major
[Wed Jun 13 16:18:15 2012] Source does appear to be extended
[Wed Jun 13 16:18:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 17:18:06 2012] Using EEF radius (= 12.92 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 17:18:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 13 17:18:06 2012] Initial guess for spatial extent in simple fitting = 12.92"
[Wed Jun 13 17:18:06 2012] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.997
[Wed Jun 13 17:18:06 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.92"
[Wed Jun 13 17:49:22 2012] fullrun_mos1_xmm0551150101_pi300-10000_cl_pass1_src10.ximg exists
[Wed Jun 13 17:49:22 2012] fullrun_mos1_xmm0551150101_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Jun 13 17:49:22 2012] Fit fullrun_mos1_xmm0551150101_pi300-10000_cl_pass1_src10 appears to have run properly
[Wed Jun 13 17:49:22 2012] fullrun_mos1_xmm0551150101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Jun 13 17:49:22 2012] fullrun_mos1_xmm0551150101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Jun 13 17:49:22 2012] Fit fullrun_mos1_xmm0551150101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Jun 13 18:20:09 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.617640 pixels away
[Wed Jun 13 18:20:09 2012] Source 3 is offset by 9.042752 and 0.949462 pixels which is larger than
2 X fitted extent = 1.489977 x 1.489977, not incorporating fit results
[Wed Jun 13 18:20:09 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 18:20:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 18:20:09 2012] Assessing source extent using major
[Wed Jun 13 18:20:09 2012] Source does appear to be extended
[Wed Jun 13 18:20:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 20:04:32 2012] XMMSAS src. selection expression = ellipse(32397.001434, 11755.541214, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 13 20:04:32 2012] Writing source region out to fullrun_mos1_xmm0551150101_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 13 20:04:32 2012] Extracting stamp from image fullrun_mos1_xmm0551150101_pi300-10000_cl_sm2.00.img.gz, (335, 98) - (410, 173)
[Wed Jun 13 20:04:32 2012] XMMSAS bgd. selection expression = annulus(32397.001434, 11755.541214, 1087.500000, 2175.000000, X, Y) && !ellipse(30603.229126, 10962.957886, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 20:04:32 2012] Writing fullrun_mos1_xmm0551150101_pi300-10000_pass1_cl_src3.gif
[Wed Jun 13 20:07:24 2012] Mean detx,y = (11124.29, -10637.69) 
[Wed Jun 13 20:07:25 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 20:07:35 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 20:07:35 2012] Setting source spectrum file to fullrun_mos1_xmm0551150101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 13 20:07:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0551150101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 13 20:24:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 20:24:01 2012] rmf not generated due to insufficient counts
[Wed Jun 13 21:21:52 2012] Updating aperture counts using extracted products
[Wed Jun 13 21:21:52 2012] Error reading totcts from fullrun_mos1_xmm0551150101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 13 21:21:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 21:21:52 2012] Using photon index=1.80, rate=0.00273, arf fullrun_mos1_xmm0551150101_pi300-10000_pass1_cl_src3.arf
[Wed Jun 13 21:21:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 21:21:52 2012] Updating source flux to 7.4e-14
[Wed Jun 13 21:21:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting